Walsh变换对冲击信号序列特征提取的研究

李宝安; 李行善; 刘星

Walsh变换对冲击信号序列特征提取的研究

北京航空航天大学自动化科学与电气工程学院, 北京 100083

基金项目: 国家自然科学基金资助项目(60073006)

详细信息

作者简介:
李宝安(1962-),男,河北唐山人,博士生, superlba@sohu.com.

中图分类号: TB 533⁺.1
计量
- 文章访问数: 2567
- HTML全文浏览量: 57
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2002-07-10
- 网络出版日期: 2003-09-30

Research on feature extraction of impulse signal using Walsh transform

School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 提出使用Walsh变换和小波包相结合的方法,对滚动轴承故障产生的冲击信号序列提取故障特征, 并给出了计算的有效算法. 对滚动轴承故障特征分析和计算表明,用改进小波包分解、重构公式能有效地剔除冲击信号序列中高频共振信号和噪声, 使用快速Walsh变换(FWT)求取其功率谱,优于Fourier变换,可很好地提取故障特征,仿真和实际数据计算的结果,证实了上述方法的有效性.
- 特征抽取 /
- 滚动轴承 /
- 故障定位 /
- 冲击信号序列 /
- Walsh变换
Abstract: Compared with Fourier transform, the amplitude of the impulse signal power spectrum of Walsh transform was larger than that of Fourier transform, and the calculation speed of Walsh transform was faster. Wavelet packet analysis could reduce noise of the signal and filter unnecessary signals and characterization of fault signal was put forward. With Walsh transform and wavelet packet analysis, characterization of fault better could be obtained. Bearing vibration signal included fault frequency features when rolling bearing had fault. The Walsh power spectrum of the rolling bearing with fault signal was calculated by using the Walsh transform and discussed for bearing fault diagnosis. Both simulation and testing results indicate that Walsh transform and wavelet packet analysis are effective method in the diagnosis of bearing various faults.
- feature extraction /
- rolling bearing /
- fault diagnosis /
- impulse signal /
- Walsh transform

HTML全文

参考文献(1)

[1] 关肇直,陈文德.沃尔什函数与沃尔什变换[M].北京:国防工业出版社,1984 Guan Zhaozhi,Chen Wende. Walsh function and Walsh transform[M]. Beijing:Publishing House of Defense Industry, 1984 (in Chinese) [2] Loparo K A,Adams M L, Lin Wei,et al. Fault detection and diagnosis of rotating machinery. IEEE Transactions on Industrial Electronics, 2000.1005~1014 [3] Li Bo. Neural-network-based motor rolling bearing fault diagnosis. IEEE Transactions on Industrial Electronics, 2000.1060~1069 [4] Gilgurt S. Ya Al-Saborno Y N M. Discrete Walsh transform and diagnosis by low-frequency noises[J]. Engineering Simulation, Gordon & Breach Science Publ Inc, 1997,14(3):425~434 [5] 王超,罗允同,许凌祥. 滚动轴承故障的沃尔什诊断法[J]. 应用力学学报, 1994, 11(2):33~39 Wang Chao,Luo Yuntong,Xu Lingxiang. Walsh diagnose method on rolling friction's fault [J]. Chinese Journal of Applied Mechanics, 1994, 11(2):33~39(in Chinese) [6] 李青,周美莲,王能超. 快速变换软件设计的二分技术[J]. 数学杂志, 1998, 18 (增刊):91~94. Li Qing, Zhou Meilian,Wang Nengchao. Bisection technique of desiging fast transforms software[J]. Chinese Journal of Math, 1998, 18(Supplement):91~94 (in Chinese) [7] 邹剑,陈进,耿遵敏.小波包算法在柴油机振声征兆提纯中的应用[J].上海交通大学学报, 2002, 36(2):217~221 Zou Jian, Chen Jin, Geng Zunmin. Wavelet packets algorithmin diesel engines' vibro-acoustic xignatures extraction[J]. Journal of Shanghai Jiaotong University, 2002, 36(2):217~221(in Chinese) [8] 徐章遂,房立清,王希武,等. 故障信息诊断原理及应用[M].北京:国防工业出版社, 2001 Xu Zhangsui,Fang Liqing,Wang Xiwu,et al. Diagnosis principle and application for the fault information[M]. Beijing:Publishing House of Defense Industry, 2001(in Chinese) [9] 梅宏斌,林志航,吴雅,等. 用于滚动轴承早期损伤诊断的模型及特征量. 振动工程学报, 1995, 8(3):191~197 Mei Hongbin, Lin Zhihang, Wu Ya,et al. A model and a feature parameter used in diagnosis of early defects in rolling element bearings[J]. Journal of Vibration Engineering, 1995, 8 (3):191~197 (in Chinese)

施引文献

资源附件(0)

访问统计