北京航空航天大学学报 ›› 2002, Vol. 28 ›› Issue (1): 119-121.

• 论文 • 上一篇    下一篇

采用CAD技术对飞机燃油测量进行姿态误差修正

袁梅1, 吴昊1, 张建2   

  1. 1. 北京航空航天大学 自动化科学与电气工程学院;
    2. 北京航空航天大学 机械工程及自动化学院
  • 收稿日期:2000-08-04 发布日期:2010-11-19
  • 作者简介:袁 梅(1967-),女,江苏泰州人,讲师,100083,北京.

Fuel Measurement with Attitude Error Correction by Using CAD Technique

YUAN Mei1, WU Hao1, ZHANG Jian2   

  1. 1. Beijing University of Aeronautics and Astronautics, School of Automation Science and Electrical Engineering;
    2. Beijing University of Aeronautics and Astronautics, School of Mechanical Engineering and Automation
  • Received:2000-08-04 Published:2010-11-19

摘要: 为了实现飞机在任意姿态下燃油油量的测量,提出了一种基于CAD技术的飞机燃油油量实时测量方法.首先采用AutoCAD三维实体造型技术,建立了某飞机机翼油箱模型,然后介绍了带姿态误差修正的燃油油量的测量原理及测量系统的组成.利用油量传感器的输出值及飞机姿态信息,可以对燃油油量进行实时测量及姿态误差修正.试验结果表明,该方法运算速度快、测量准确.

Abstract: In order to measure aircraft fuel in any attitude, a real-time fuel measuring method based on CAD technique is presented. First, adopting 3D solid modeling technique, the model of fuel tank of some aircraft is established. The measurement principle with attitude error correction and the structure of the practical test system are then introduced clearly. Using the output data of fuel sensor and information of aircraft attitude, the real-time measurement and attitudeerror correction of aircraft fuel have been done. The experiment results illustrate that this method is very useful because of fast and accurate calculation.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发