北京航空航天大学学报 ›› 2001, Vol. 27 ›› Issue (2): 129-132.

• 论文 • 上一篇    下一篇

铝合金预腐蚀与疲劳性能灰色模型研究

刘延利1, 钟群鹏1, 王宇魁2   

  1. 1. 北京航空航天大学 材料科学与工程系;
    2. 陕西飞机制造公司
  • 收稿日期:1999-11-08 出版日期:2001-02-28 发布日期:2010-09-27
  • 作者简介:刘延利(1970-),男,陕西汉中人,博士生,100083,北京.
  • 基金资助:

    国家重点基础研究专项经费资助项目(G19990650)

Research of Gray Model Applied in the Prior Corrosion and Fatigue of Aluminum Alloys

LIU Yan-li1, ZHONG Qun-peng1, WANG Yu-kui2   

  1. 1. Beijing University of Aeronautics and Astronautics, Dept. of Materials Science and Engineering;
    2. Shanxi Aircraft Manufacture Corporation
  • Received:1999-11-08 Online:2001-02-28 Published:2010-09-27

摘要: 利用等间隔和非等间隔GM(1,1)模型,拟合并建立了模拟加速预腐蚀后铝合金的腐蚀失重、最大孔蚀深度及疲劳强度额定值与腐蚀时间的非线性关系.结果表明:与常用的幂函数模型相比,用GM(1,1)模型能较好地反映铝合金腐蚀过程的变化趋势及其对疲劳性能的影响;无论等间隔还是非等间隔数据,GM(1,1)模型都能较好地描述,并可通过残差修正模型来提高GM(1,1)模型的精度.

Abstract: The effect of corrosion temperature and time on properties of the prior-corroded aluminum alloys was discussed tentatively, and gray model was introduced in the research of the simulating accelerated corrosion test for aluminum alloys. The non-linear relationship between mass loss,maximum corrosion depth,detail fatigue rating(DFR) and corrosion time was established based on power function,constant interval gray model as well as variable interval gray model. The results indicate that gray model can be employed to predict the underlying corrosion trend and fatigue properties precisely,compared with power model.Whether constant interval or variable interval data,gray model can describe successfully,and the accuracy of the gray model can also be improved by setting up modified residuals model.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发