北京航空航天大学学报 ›› 2003, Vol. 29 ›› Issue (5): 389-393.

• 论文 • 上一篇    下一篇

基于检查单机制的过程剪裁方法CPTM

曹会明, 金茂忠, 刘超   

  1. 北京航空航天大学 计算机科学与工程系
  • 收稿日期:2001-01-29 出版日期:2003-05-31 发布日期:2003-05-25
  • 作者简介:曹会明 (1973-),男,辽宁凌源人,博士生,100083,北京.
  • 基金资助:

    航空科学基金资助项目(99F51102)

ChecklistBased Process Tailoring Method

Cao Huiming, Jin Maozhong, Liu Chao   

  1. Dept. of Computer Science and Engineering, Beijing University o f Aeronautics and Astronautics
  • Received:2001-01-29 Online:2003-05-31 Published:2003-05-25

摘要: 如何对组织标准化软件过程进行合理剪裁从而得到真正适合项目特点的项目定义软件过程是 一个既关键又复杂的技术.首先阐述了组织标准化软件过程;然后介绍了过程剪裁,深入分析 了4个影响过程剪裁的方面,在此基础上,提出一种基于检查单机制的过程剪裁方法CPTM(Ch ecklist-based Process Tailoring Method),并详细描述了运用它进行过程剪裁的步骤; 最后给出了CPTM的一个应用实例.实践证明,CPTM使过程剪裁简便易行,大大减少了软件组 织在过程剪裁上的投入.

Abstract: It is a key and complex technique that tailors the organization's standard softw are p rocess to get the defined software process fitting the specific characteristics of the project. The organization's standard software process was discussed. The pr ocess tailoring was discussed. Four aspects impacting on process tailoring were analyzed. A checklist-based process tailoring method(CPTM)was presented. The p rocedures of process tailing using CPTM were described. An application case of t he CPTM was introduced. It proves that the process tailoring can be conducted sm oothly with CPTM and the investment for software organizations can be reduced gr eatly in process tailoring.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发