北京航空航天大学学报 ›› 2000, Vol. 26 ›› Issue (6): 688-690.

• 论文 • 上一篇    下一篇

用微分法及Mori-Tanaka法求解 复合泡沫塑料的有效模量

严寒冰   

  1. 北京航空航天大学 飞行器设计与应用力学系
  • 收稿日期:1999-08-23 发布日期:2010-11-19
  • 作者简介:严寒冰(1975-),男,江西九江人,硕士生,100083,北京.
  • 基金资助:

    国防基金资助项目(97J12.2.4 HK01)

Determination of the Effective Modulus of the Syntactic Foam Containing Hollow Spheres by Differential Scheme and MoriTanaka Method

YAN Han-bing   

  1. Beijing University of Aeronautics and Astronautics, Dept. of Flight Vehicle Design and Applied Mechanics
  • Received:1999-08-23 Published:2010-11-19

摘要: 基于微分法和Mori-Tanaka方法提出了两种预测含空心球复合材料有效模量的方法;提出利用多次单相夹杂的方法来预测多相颗粒增强复合材料的有效模量;并利用以上的两种方法,求解了含空心球复合泡沫塑料的有效模量.结果表明,理论预测结果和实验结果吻合得较好.同时讨论了空心玻璃微珠相关因素对复合材料有效模量的影响.

Abstract: On the basis of differential scheme and Mori-Tanaka method,two methods are developed to determine the effective modulus of composite reinforced by hollow spheres with changing contents and changing ratio of inside and outside radii.Then,Multi-step homogenization technique is adopted to determine the effective modulus of multi-phase composite.By the two approaches mentioned above,the effective modulus of the syntactic foam containing hollow glass spheres are calculated. The results show that the theoretical prediction of the Young-s modulus is precise enough.The factors of hollow spheres that influence the composite modulus are analyzed.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发