北京航空航天大学学报 ›› 2000, Vol. 26 ›› Issue (2): 125-128.

• 论文 •    下一篇

一种新的微机辅助疲劳裂纹扩展综合测试系统

刘延利1, 钟群鹏1, 路民旭2   

  1. 1. 北京航空航天大学 材料科学与工程系;
    2. 中国石油天然气总公司管材研究所
  • 出版日期:2000-02-29 发布日期:2010-09-27

Set of New Microcomputer Aided System for Comprehensively Measuring FCG

LIU Yan-li1, ZHONG Qun-peng1, LU Min-xu2   

  1. 1. Beijing University of Aeronautics and Astronautics,Dept. of Materials Science and Engineering;
    2. Tubular Goods Research Center of CNPC
  • Online:2000-02-29 Published:2010-09-27

摘要: 在对数据处理和变载技术研究的基础上,采用C+ +编程,在X86系列微机上建立了一套新的功能先进的计算机辅助疲劳裂纹扩展速率综合测试、处理与分析系统.与其它系统相比,该系统在测试精度、信息获取、试验周期等方面大大改进,可进行恒ΔP法、恒ΔK法以及降ΔK升ΔK法等多种载荷与应力强度因子幅的控制试验,并在腐蚀疲劳裂纹扩展测试中得到成功应用,说明该系统测试有效,功能可靠.

Abstract: A set of new computer aided system(CAS)programmed by C+ + and developed on X86 series microcomputer for comprehensively measuring crack growth rate is briefly introduced and some part of algorithms for data process and the selection technique of load-variation are given.The CAS mentioned above can be applied to tests with different range of load ΔP and range of stress intensity factor ΔK such as constant ΔP method,constant ΔK method as well as decreasing ΔK and increasing ΔK method.Compared with other systems,the new systems can increase the measurement accuracy,shorten testing time and obtain more information. It has been successfully used in measuring corrosion fatigue crack growth rate,which shows that the system is effective in measurement and reliable in function.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发