北京航空航天大学学报 ›› 1999, Vol. 25 ›› Issue (4): 434-437.

• 论文 • 上一篇    下一篇

轴向斜槽式轮毂处理的三维流场分析

李玲, 陆亚钧   

  1. 北京航空航天大学 动力系
  • 收稿日期:1998-01-13 出版日期:1999-04-30 发布日期:2010-09-28
  • 作者简介:女 28岁 博士生 现为清华大学水利水电工程系博士后 100084 北京
  • 基金资助:

    国家部委预研课题(24-2-3-3)资助项目

3-D Numerical Analysis of Axial Skewed Slotted Hub Treatment

Li Ling, Lu Yajun   

  1. Beijing University of Aeronautics and Astronautics,Dept. of Jet Propulsion
  • Received:1998-01-13 Online:1999-04-30 Published:2010-09-28

摘要: 首次采用网格分区的方法,对带有轴向斜槽式轮毂处理的压气机叶栅通道流场进行了数值模拟,分析了轴向斜槽式轮毂处理的扩稳机理以及它对压气机性能的影响的原因所在,进一步探讨轴向斜槽的几何参数的变化对其扩稳效果的影响.在计算中采用了非交错网格的SIMPLE算法,求解时均N-S方程,紊流模型采用基于RNG(重整化群)方法的K-ε紊流模型.

Abstract: The 3-D incompressible steady time -averaged N-S equation , K-ε turbulence model equations based on RNG method are applied to calculate the flowfield in the compressor cascade passage with axial skewed slotted hub treatment .By using the method of zonal grids, single grid system with lapped zones which would transfer the flow parameters is established in the course of calculation . The mechanism of extending stability of axial skewed slotted hub treatment and effect on the compressor are elaborated by means of a 3-D viscous numerical simulation. It is revealed that shape parameters of axial skewed slotted hub treatment are main factors which should be paid attention in the design of hub treatment . They strongly affect stable working range of the compressor.The SIMPLE algorithm with non-stagger grid is employed and the question of the pressure oscillating is solved.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发