[an error occurred while processing this directive]
   
 
���¿��ټ��� �߼�����
   ��ҳ  �ڿ�����  ��ί��  Ͷ��ָ��  �ڿ�����  ��������  �� �� ��  ��ϵ����
�������պ����ѧѧ�� 2011, Vol. 37 Issue (10) :1321-1325    DOI: CNKI:11-2625/V.20111013.1708.014
���� ����Ŀ¼ | ����Ŀ¼ | ������� | �߼����� << | >>
���ڼ������Ƿ���CBN����ɰ�ֱ�����ò���
�·�, ����һ, ��־ͬ*
�������պ����ѧ ��е���̼��Զ���ѧԺ, ���� 100191
Laser triangulation based measurement about the surface 3D topography of a cup CBN grinding wheel
Chen Feng, Chen Wuyi, Chen Zhitong*
School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

ժҪ
�����
�������
Download: PDF (0KB)   HTML 1KB   Export: BibTeX or EndNote (RIS)      Supporting Info
ժҪ �����˳�����ɰ�ֱ�����ò��ⷽ���ľ�����,�����˼������Ƿ��Ļ���ԭ��.�ڴ˻�����,����˼������Ƿ����ɰ�ֱ�����ά��ò�ķ�����װ��,���������Զ�ɰ�ֱ������ɨ�����,�õ�����������ά����,���ͨ��origin����Ļ�ͼ���ܺ����ݷ������ܵõ�ɰ�ֱ������ά��òͼ�͵���ɰ������ά�ߴ�.��ʵ����,�õ����ں��շ�����ҶƬĥ����ʹ�õ�60#����CBNɰ�ֱ���0.5 mm×1.6 mm�������ά��òͼ,ij����ĥ�����Ϊ209.1 μm,ĥ������ͻ���߶�Ϊ17.3 μm.�ý����������WYKO�İ׹������ά������ò�Dz������֮������Ϊ1.00%����,��˵�������õļ������Ƿ�����ɰ�ֱ�����ά��ò�ǿ��е�.
Service
�ѱ����Ƽ�������
�����ҵ����
�������ù�����
Email Alert
RSS
�����������
�ؼ����� �������Ƿ�   ɰ�ֱ���   ��ά��ò   ĥ���ߴ�     
Abstract�� The limitation of the normal measuring methods about the surface topography of the grinding wheel was discussed, and the theory of the laser triangulation was expounded. Then, a method of measuring the surface topography of the wheel using the laser triangulation was proposed and the measuring system was built. It was used to obtain the 3D coordinate data of the point on the wheel surface by scanning way. Then the 3D topography of the grinding wheel surface could be established and the 3D size of one single grain can be obtained through analyzing those measuring data with the Origin 8.0. In the experiment, the 3D topography of 0.5 mm×1.6 mm area on the wheel surface were obtained. It also indicates that the width of a wheel grain was 209.1 μm and the height was 17.3 μm.The error ratio of this measuring was about 1.00%,compared with the measuring result using white-light interfering profilometer by WYKO from the US. It is concluded that the proposed method and system is feasible and satisfied.
Keywords�� laser triangulation   wheel surface   3D topography   grain size     
Received 2010-05-13;
Fund:

�Ƽ��ش�ר�����������Ŀ(2009ZX04001-141)

About author: �� ��(1984-),��,����������,˶ʿ��,513576208@qq.com.
���ñ���:   
�·�, ����һ, ��־ͬ.���ڼ������Ƿ���CBN����ɰ�ֱ�����ò���[J]  �������պ����ѧѧ��, 2011,V37(10): 1321-1325
Chen Feng, Chen Wuyi, Chen Zhitong.Laser triangulation based measurement about the surface 3D topography of a cup CBN grinding wheel[J]  JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND A, 2011,V37(10): 1321-1325
���ӱ���:  
http://bhxb.buaa.edu.cn//CN/CNKI:11-2625/V.20111013.1708.014     ��     http://bhxb.buaa.edu.cn//CN/Y2011/V37/I10/1321
Copyright 2010 by �������պ����ѧѧ��