基于仿真的制造系统生产计划与控制

钟湄莹; 刘志新

基于仿真的制造系统生产计划与控制

北京航空航天大学经济管理学院, 北京 100191

详细信息

中图分类号: TP391
计量
- 文章访问数: 2024
- HTML全文浏览量: 259
- PDF下载量: 685
- 被引次数: 0
出版历程
- 收稿日期: 2012-06-26
- 网络出版日期: 2012-09-30

Production plan and control of manufacturing system based on simulation

School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 采用面向对象建模方法,通过对现代制造过程的生产计划调度数据的分析,建立了车间仿真系统模型.从单元和车间的角度,采用流程控制图给出了现代制造过程的仿真流程及控制点.最后基于Witness动态系统仿真平台建立了仿真生产系统,对某航空生产厂叶片车间的生产计划进行了仿真与优化.
- 单元化制造 /
- 建模 /
- 优化 /
- 系统仿真
Abstract: Based on the analysis on production plan and schedule data of the modern manufacturing procedure, the objected-oriented simulation system model for job-shop was established using objective-oriented method. From the viewpoints of manufacturing cell and job shop, the simulation procedure and control points of the modern manufacturing system were provided by process control charts. An example of objected-oriented simulation system was established to apply production planning design and optimization for a job shop manufacturing engine turbine blade of an aviation enterprise based on witness dynamic system simulation platform.
- cellular manufacturing /
- modeling /
- optimization /
- system simulation

HTML全文

参考文献(10)

[1]	郑力,江平宇,乔立红,等. 制造系统研究的挑战和前沿[J].机械工程学报,2010,46(21):124-136 Zheng Li,Jiang Pingyu,Qiao Lihong,et al.Challenges and frontiers of manufacturing systems[J].Journal of Mechanical Engineering,2010,46(21):124-136 (in Chinese)
[2]	Aleisa E E,Lin L.For effective facilities planning:layout optimisation then simulation, or vice versa//Kuhl M E,Steiger N M,Armstrong F B,et al.Proceedings of the 2005 Winter Simulation Conference.Florida:Society for Computer Simulation International,2005:1381-1385
[3]	刘飞．先进制造系统[M]．北京:中国科学技术出版社,2006:10-30 Liu Fei.Modern manufacturing system[M].Bejing:China Science & Technology Press,2006:10-30(in Chinese)
[4]	Chandra C,Grabis J.Role of flexibility in supply chain design and modeling:introduction to the special issue[J].Omega,2009(37): 743-745
[5]	芮剑锋,杨建军,石艳.基于TOC及启发式规则的生产计划与控制方法[J].航空制造技术,2012(7):76-80 Rui Jianfeng,Yang Jianjun,Shi Yan.Production planning and control method based on TOC and heuristic rules[J].Aeronautical Manufacturing Technology,2012(7):76-80(in Chinese)
[6]	丁胡送,何平,徐晓燕.柔性对分布式制造系统绩效的影响[J].系统工程理论与实践,2011,31(9):1776-1783 Ding Husong,He Ping,Xu Xiaoyan.Impact of flexibility on performance of decentralized manufacturing system[J].Systems Engineering-Theory & Practice,2011,31(9):1776-1783(in Chinese)
[7]	段建国,李爱平,谢楠,等.基于状态熵的制造系统结构复杂性建模与评价[J].机械工程学报,2012,48(5):92-100 Duan Jianguo,Li Aiping,Xie Nan,et al.Structural complexity modeling and evaluation of manufacturing systems based on state entropy[J].Journal of Mechanical Engineering,2012,48(5):92-100(in Chinese)
[8]	Kuzgunkaya O,Eimaraghy H A．Assessing the structural complexity of manufacturing systems configurations[J].International Journal of Flexible Manufacturing Systems,2006,18(2):145-171
[9]	杨建军,寇益.在线仿真系统在生产计划与调度中的应用[J].北京航空航天大学学报,2009,35(2):215-218 Yang Jianjun,Kou Yi.Application of online simulation in production planning and scheduling[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(2):215-218(in Chinese)
[10]	Zhang Zhifeng.Complexity of cellular manufacturing systems based on entropy models[J]．Journal of Mechanical Science and Technology,2010,24(11):2275-2280