北京航空航天大学学报 ›› 2012, Vol. 38 ›› Issue (10): 1405-1409.

• 论文 • 上一篇    下一篇

加速度计加速退化机理模型建模方法

王前程, 陈云霞, 康锐   

  1. 北京航空航天大学 可靠性与系统工程学院, 北京 100191
  • 收稿日期:2012-01-16 出版日期:2012-10-30 发布日期:2012-10-30

Accelerated degradation mechanism modeling method for accelerometers

Wang Qiancheng, Chen Yunxia, Kang Rui   

  1. School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2012-01-16 Online:2012-10-30 Published:2012-10-30

摘要: 针对传统加速退化试验方案设计缺乏机理模型支持的问题,给出一种基于主机理层试验、关键部件仿真、参数解析和系统辨识于一体的加速退化机理模型建模方法.调研相关资料确定影响产品参数变化的主机理,通过主机理层试验得到有限元仿真输入参数,结合有限元仿真得到产品关键有限元输出参数,同时利用解析方法得到有限元输出参数和产品参数之间关系,根据系统辨识方法建立了加速退化机理模型.以加速度计为例,建立了加速度计标度因数稳定性加速退化机理模型,将模型结果与其在常温贮存条件下结果进行对比分析,结论显示该方法的有效性.

Abstract: To deal with the difficulties of lacking mechanism model for traditional accelerated degradation test design, a modeling method was proposed based on main mechanism test, key part simulation, parameters analysis and system identification. The main mechanism was identified and its test was carried out next. The key output parameters were obtained through finite element analysis. Then the relationship between key output parameters and product performance parameters was gained by parameters analysis. Finally, the accelerated degradation mechanism model was got through system identification. Taking account of the accelerometer, the accelerated degradation mechanism model and the results of scaling factor stability analysis at constant temperature were given. The conclusion of comparing the model results with historical data at constant temperature proved that the method is feasible.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发