北京航空航天大学学报 ›› 2013, Vol. ›› Issue (6): 723-727.

• 论文 • 上一篇    下一篇

提高电动加载系统输出平滑的CMAC复合控制

杨波, 程龙   

  1. 北京航空航天大学 自动化科学与电气工程学院, 北京 100191
  • 收稿日期:2012-06-12 出版日期:2013-06-30 发布日期:2013-06-23
  • 基金资助:
    国家自然科学基金资助项目(51277008)

Improving the output smoothing of the electric loading system based on the CMAC+PD compound control strategy

Yang Bo, Cheng Long   

  1. School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2012-06-12 Online:2013-06-30 Published:2013-06-23

摘要: CMAC(Cerebellar Model Articulation Controller) 和PD(Proportional Derivative)复合控制算法有时因输出不平滑会引起加载电机抖动而影响控制效果.通过对该输出不平滑问题进行分析,提出了一种新的提高输出平滑性的改进CMAC复合控制算法,该方法通过新的权值更新公式,在权值更新时直接达到减小误差和提高输出平滑性的目的.仿真和实验结果表明:改进后的算法能够有效提高输出平滑性,降低了21%的稳态误差,且保证在加载时有良好的稳定性和抗干扰能力.

Abstract: Cerebellar model articulation controller and proportional derivative (CMAC+PD) compound control strategy had an unsmooth output, which would increase the vibration of loading motor and decrease the control performance. An improved CMAC+PD compound control strategy with a new weights updating formula was proposed after analyzing the reason of the unsmooth problem. The improved CMAC+PD compound control strategy could not only decrease the error, but also improve the output smoothness in the weights updating process. The simulation and experimental results demonstrated that the improved CMAC+PD compound control strategy has a more smooth output and a better stability performance than the conventional CMAC+PD compound control strategy. And the steady state error is reduced by 21%.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发