北京航空航天大学学报 ›› 2013, Vol. ›› Issue (6): 734-738,744.

• 论文 • 上一篇    下一篇

基于灰色理论的失效机理一致性检验方法

姚军, 王欢, 苏泉   

  1. 北京航空航天大学 可靠性与系统工程学院, 北京 100191
  • 收稿日期:2012-06-13 出版日期:2013-06-30 发布日期:2013-06-23

Consistency identification method of failure mechanism based on grey theory

Yao Jun, Wang Huan, Su Quan   

  1. School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2012-06-13 Online:2013-06-30 Published:2013-06-23

摘要: 针对基于加速模型参数不变、基于统计方法及基于试验观察3种常见的失效机理一致性检验方法进行研究,发现3种方法均需要加速试验数据来对失效机理一致性进行检验,不能事先为加速试验提供理论指导;提出了一种基于灰色理论的失效机理一致性检验方法,该方法可用预试验数据进行失效机理一致性检验,为加速试验制定最高应力台阶提供理论指导;结合某型光电编码器预试验数据对该方法进行实例验证,得出175℃附近为失效机理变化点,并与基于统计的方法进行对比;最后,对产品进行失效机理分析,利用扫描电镜分析(SEM,Scanning Electron Microscope)结果验证该方法的正确性.

Abstract: A study was made on the consistency identification method of failure mechanism. Three common methods based on the acceleration model parameters unchanged, based on the statistical methods and based on the experimental observation were studied. It was found that the three methods need the accelerated test data for the consistency identification method of failure mechanism, but this could not provide theoretical guidance for the accelerated test. A consistency identification method of failure mechanism based on grey theory was put forward, which can be used for failure mechanism consistency identification by the pre-test data. Combined with the pre-test data of a certain type of photoelectric encoder, the conclusion was drawn that 175℃° was the change point of the failure mechanism using this method. It made a contrast with the method based on statistical. Finally, the failure mechanism analysis for the products was used to verify the correctness of the method.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发