3UPS-S并联机构单支链驱动奇异分析

韩先国; 刘岩龙

3UPS-S并联机构单支链驱动奇异分析

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 航空科学基金资助项目（20081651025）

详细信息

中图分类号: TH113
计量
- 文章访问数: 1532
- HTML全文浏览量: 227
- PDF下载量: 504
- 被引次数: 0
出版历程
- 收稿日期: 2013-03-23
- 网络出版日期: 2014-01-20

Singularity of 3UPS-S parallel mechanism in single limb motion

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 并联机构进行单支链驱动时，由于受到其他支链的约束，不能实现全行程范围运动.为了分析并联机构单支链驱动受限的本质原因，采用旋量互易积的方法，计算单支链驱动的轴向速度分量.从计算结果可知，轴向速度为零时，单支链驱动到达边界.并联机构在输入空间发生驱动奇异，同时在工作空间发生位姿奇异，因此并联机构的驱动奇异就是位姿奇异.通过分析输入输出速度关系，并联机构到达输入空间边界.最后给出了并联机构单支链驱动的一般策略.
- 并联机构 /
- 单支链驱动 /
- 旋量互易积 /
- 输入空间边界
Abstract: If only one limb of the parallel mechanism was driven, this limb can't move in full stroke because of the constraints from other limbs. In order to analyze the essential cause of single limb motion limit in parallel mechanism, the method of screw reciprocal product was adopted to calculate the axial velocity component. According to the result, when the axial velocity changes into zero, the single limb motion arrives boundary. The parallel mechanism is in single limb motion singularity from input space. At the same time the parallel mechanism is in configuration singularity from workspace. So the single limb motion singularity is equal to configuration singularity in parallel mechanism. By analyzing the input and output velocity at the moment, the parallel mechanism got to the boundary of input space. Finally the general strategy of single limb motion was given.
- parallel mechanism /
- single limb motion /
- screw reciprocal product /
- boundary of input space

HTML全文

参考文献(11)

[1]	Chanal H, Duc E, Ray P, et al.A new approach of the geometrical calibration of parallel kinematics machines tools based on the machining of a dedicated part[J].International Journal of Machine Tools and Manufacturing, 2007, 47(7/8):1151-1163
[2]	Daniel K, Philippe W, Damien C.Kinematic analysis of a serial-parallel machine tool:the VERNE machine[J].Mechanism and Machine Tool, 2009, 44(2):487-498
[3]	魏敏和, 韩先国, 张军.3-UPS/S并联转台球铰链的优化研究[J].航天制造技术, 2011(3):19-23 Wei Minhe, Han Xianguo, Zhang Jun.Optimization research of spherical joints in 3-UPS/S parallel rotational table[J].Aerospace Manufacturing Technology, 2011(3):19-23(in Chinese)
[4]	熊涛. 卫星自动对接技术研究[J].航空制造技术, 2011(22):36-39 Xiong Tao.Automatic docking technology of satellite[J].Aeronautical Manufacturing Technology, 2011(22):36-39(in Chinese)
[5]	曲艳丽, 赵明扬, 张崇峰.空间对接机构缓冲系统及其运动学建模[J].上海航天, 2002(1):13-16 Qu Yanli, Zhao Mingyang, Zhang Chongfeng.Damping mechanism for space docking and its kinematics modeling[J].Aerospace Shanghai, 2002(1):13-16(in Chinese)
[6]	温兆麟, 陈新, 敖银辉, 等.并联机构应用的领域及其构型研究[J].机床与液压, 2005(5):6-9 Wen Zhaolin, Chen Xin, Ao Yinhui, et al.Application area and structure study of parallel mechanism[J].Machine Tool & Hydraulics, 2005(5):6-9(in Chinese)
[7]	Cha S H, Lasky T A, Velinsky S A.Determination of the kinematically redundant active prismatic joint variable ranges of a planar parallel mechanism for singularity-free trajectories[J].Mechanism and Machine Theory, 2009, 44(5):1032-1044
[8]	曹永刚, 张玉茹.6-RSS型并联机构奇异性分析[J].机械工程学报, 2008, 44(6):79-87 Cao Yonggang, Zhang Yuru.Singularity analysis for 6-RSS parallel mechanism[J].Chinese Journal of Mechanical Engineering, 2008, 44(6):79-87(in Chinese)
[9]	Sandipan B, Ashitava G.Analysis of configuration space singluarities of closed-loop mechanism and parallel manipulators[J].Mechanism and Machine Theory, 2004(39):519-544
[10]	Fang Hairong, Fang Yuefa, Zhang Ketao.Reciprocal screw theory based singularity analysis of a novel 3-DOF parallel manipulator[J].Chinese Journal of Mechanical Engineering, 2012, 25(4): 647-653
[11]	韩先国, 陈五一.利用位置正解分析并联机构奇异分布规律[J].自然科学进展, 2005, 15(5):631-635 Han Xianguo, Chen Wuyi.Analysis of the rule of singularity in parallel mechanism via the forward displacement solution[J].Process in Natural Science, 2005, 15(5):631-635(in Chinese)