北京航空航天大学学报 ›› 2014, Vol. 40 ›› Issue (6): 775-781.doi: 10.13700/j.bh.1001-5965.2013.0440

• 论文 • 上一篇    下一篇

适应弯扭隔肋的涡轮叶片多种扰流肋造型方法

杨炯, 席平, 胡毕富, 张宝源   

  1. 北京航空航天大学 机械工程及自动化学院, 北京 100191
  • 收稿日期:2013-07-24 出版日期:2014-06-20 发布日期:2014-07-03
  • 作者简介:杨 炯(1990- ),男,河南周口人,博士生,jiong_yang@foxmail.com.
  • 基金资助:

    国家自然科学基金资助项目(51075021)

Multi-type ribs of turbine blade modeling method fitting bowed-twist wall

Yang Jiong, Xi Ping, Hu Bifu, Zhang Baoyuan   

  1. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2013-07-24 Online:2014-06-20 Published:2014-07-03

摘要: 针对弯扭冷却通道内扰流肋的特点,提出了基于等距曲面的扰流肋造型方法,用隔肋等距面和叶盆或叶背等距面裁剪平板工具体得到肋条,以此为基础完成扰流肋建模.深入分析了该方法的原理;提出隔肋面自动识别和曲面匹配算法;提取了关键造型参数;给出了基于草图的参数化实现方法,并在UG上开发出了造型模块,实现了适应弯扭隔肋的多种扰流肋造型.

Abstract: Considering the geometric features of ribs in a bowed-twist cooling passage, a modeling method based on equidistant was presented. It generated rib tools, which was a tablet trimmed by equidistant surfaces of walls in intracavity of blade and pressure slide or suction slide, and then conducted modeling of ribbed channels. Furthermore, the principle of the modeling method was deeply analyzed, and two algorithms were developed, one recognized surfaces of walls in intracavity of blade automatically, the other matched two surfaces. The main parameters were determined as well. Meanwhile, a means based on sketch to parameterize ribbed channels was provided. Eventually, the parametric design module of ribbed channels was developed on unigraphics (UG), which achieved multiple ribbed channels modeling.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发