留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Chaboche随动硬化模型参数确定及棘轮效应

姜金朋 陈涛 金平 王珏

姜金朋, 陈涛, 金平, 等 . Chaboche随动硬化模型参数确定及棘轮效应[J]. 北京航空航天大学学报, 2014, 40(10): 1430-1435. doi: 10.13700/j.bh.1001-5965.2013.0655
引用本文: 姜金朋, 陈涛, 金平, 等 . Chaboche随动硬化模型参数确定及棘轮效应[J]. 北京航空航天大学学报, 2014, 40(10): 1430-1435. doi: 10.13700/j.bh.1001-5965.2013.0655
Jiang Jinpeng, Chen Tao, Jin Ping, et al. Parameter determination of Chaboche kinematic hardening models and ratcheting simulation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(10): 1430-1435. doi: 10.13700/j.bh.1001-5965.2013.0655(in Chinese)
Citation: Jiang Jinpeng, Chen Tao, Jin Ping, et al. Parameter determination of Chaboche kinematic hardening models and ratcheting simulation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(10): 1430-1435. doi: 10.13700/j.bh.1001-5965.2013.0655(in Chinese)

Chaboche随动硬化模型参数确定及棘轮效应

doi: 10.13700/j.bh.1001-5965.2013.0655
基金项目: 国家863计划资助项目
详细信息
    作者简介:

    姜金朋(1988-),女,山东莱阳人,博士生,jjpbuaa@126.com.

  • 中图分类号: TG142

Parameter determination of Chaboche kinematic hardening models and ratcheting simulation

  • 摘要: 采用遗传算法确定不同Chaboche随动硬化模型的参数,得到的3种模型中,四分量模型对棘轮的预测与试验结果符合最好.增大应力幅值或应力平均值,都会使应变峰值增大,应变累积速度加快;利用确定的四分量模型研究加载顺序对棘轮的影响.结果表明,平均应力加载顺序对棘轮预测有较大影响,加载顺序高-低的累积应变低于加载顺序低-高的累积应变,而且先加载的平均应力越大,后加载的载荷产生的累积应变越小;而应力幅值加载顺序对应变累积几乎没有影响.

     

  • [1] Hassan T, Kyriakides S.Ratcheting in cyclic plasticity,part I: uniaxial behavior[J].International Journal of Plasticity,1992, 8(1): 91-116
    [2] Hassan T, Corona E,Kyriakides S.Ratcheting in cyclic plasticity,part II:multiaxial behavior[J].International Journal of Plasticity,1992,8(2):117-146
    [3] Hassan T, Kyriakides S.Ratcheting of cyclically hardening and softening materials:I.uniaxial behavior[J].International Journal of Plasticity,1994,10(2):149-184
    [4] Hassan T, Kyriakides S.Ratcheting of cyclically hardening and softening materials:II.multiaxial behavior[J].International Journal of Plasticity,1994,10(2):185-212
    [5] Corona E, Hassan T,Kyriakides S.On the performance of kinematic hardening rules in predicting a class of biaxial ratcheting histories[J].International Journal of Plasticity,1996,12(1):117-145
    [6] Kang G Z, Gao Q,Yang X J.Uniaxial cyclic ratcheting and plastic flow properties of SS304 stainless steel at room and elevated temperatures[J].Mechanics of Materials,2002, 34(3): 145-159
    [7] Prager W. A new method of analyzing stresses and strains in work-hardening plastic solids[J].ASME Journal of Applied Mechanics,1956,23:493-496
    [8] Besseling J F. A theory of elastic,plastic,and creep deformations of an initially isotropic material showing anisotropic strain-hardening, creep recovery and secondary creep[J].ASME Journal of Applied Mechanics,1958,25:529-536
    [9] Mroz Z. On the description of anisotropic work-hardening[J].Journal of the Mechanics and Physics of Solids,1967,15: 163175
    [10] Frederick C O, Armstrong P J.A mathematical representation of the multiaxial bauschinger effect[J].Materials at High Temperatures,2007,24(1):1-26
    [11] Chaboche J L. Time-independent constitutive theories for cyclic plasticity[J].International Journal of Plasticity,1986,2(2):149-188
    [12] Bari S, Hassan T.Anatomy of coupled constitutive models for ratcheting simulation[J].International Journal of Plasticity,2000,16(3/4):381-409
    [13] Lynda D, Salim M.Performance of the Chaboche kinematic hardening model to predict ratchet using different data bases[J]. International Review of Mechanical Engineering,2009, 3(4): 467-472
    [14] Rezaiee-Pajand M, Sinaie S.On the calibration of the Chaboche hardening model and a modified hardening rule for uniaxial ratcheting prediction[J].International Journal of Solids and Structures,2009,46(16):3009-3017
    [15] Mahmoudi A H, Pezeshki-Najafabadi S M,Badnava H.Parameter determination of Chaboche kinematic hardening model using a multi objective genetic algorithm[J].Computational Materials Science,2011,50(3):1114-1122
    [16] Badnava H, Farhoudi H R,Nejad K F,et al.Ratcheting behavior of cylindrical pipes based on the Chaboche kinematic hardening rule[J].Journal of Mechanical Science and Technology,2012,26(10):3073-3079

  • 加载中
计量
  • 文章访问数:  1835
  • HTML全文浏览量:  66
  • PDF下载量:  1323
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-11-14
  • 网络出版日期:  2014-10-20

目录

    /

    返回文章
    返回
    常见问答