时变热辐射环境下高温合金蜂窝板三维热变形测量

潘兵; 江天云; 吴大方

doi:10.13700/j.bh.1001-5965.2014.0391

时变热辐射环境下高温合金蜂窝板三维热变形测量

doi: 10.13700/j.bh.1001-5965.2014.0391

北京航空航天大学航空科学与工程学院, 北京 100191

基金项目: 国家自然科学基金(11272032,91216301,11322220,11427802);中央高校基本科研业务费专项资金(YWF-14-HKXY-001)

详细信息

通讯作者:
潘兵(1978—),男,安徽无为人,教授,panb@buaa.edu.cn,主要研究方向为实验固体力学.

中图分类号: V45;O341
计量
- 文章访问数: 1058
- HTML全文浏览量: 117
- PDF下载量: 513
- 被引次数: 0
出版历程
- 收稿日期: 2014-07-01
- 网络出版日期: 2015-06-20

3D thermal deformation measurement of superalloy honeycomb panels in time-varying thermal radiation environment

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 轻质、高强和隔热性能优良的蜂窝合金板结构已广泛用于航空航天领域,其在模拟瞬态气动热环境下的热变形是高速飞行器热防护结构设计的重要参数之一.首先,用自行研制的红外辐射瞬态气动热实验模拟系统模拟与其服役环境类似的时变热辐射环境,用新型"主动成像"三维数字图像相关(3D-DIC)测量方法对高温合金蜂窝板结构试件在时变热辐射环境下不同时刻的三维热变形进行了测量.其次,为保证三维数字图像相关测量方法能有效实施,提出一种制作稳定的大面积高温散斑新方法,该方法制作的高温散斑能在整个实验过程中保持稳定,可作为高温变形的有效载体.最后,用Hoff等效刚度理论计算高温合金蜂窝板在稳态时的最大翘曲位移.研究结果表明:210 mm×210 mm的高温合金蜂窝板在单侧面辐射加热条件下其面内变形为均匀热变形,而离面变形为轴对称的翘曲变形,在900℃时其最大离面翘曲位移约为1.6 mm;Hoff等效刚度理论计算结果与实验结果相吻合.
- 高温合金蜂窝板 /
- 三维数字图像相关 /
- 三维热变形 /
- 高温散斑 /
- Hoff等效刚度理论
Abstract: Superalloy honeycomb panels with the advantages of light weight, high strength and excellent heat-shielding properties have been widely used in the field of aeronautics and astronautics. Deformation measurement of superalloy honeycomb panels due to transient thermal loading is essential for the design of heat-shielding structures. Firstly, a self-developed infrared radiation transient aerodynamic heating simulation system was used to simulate conditions similar to transient aerodynamics service conditions and a novel active imaging three-dimensional digital image correlation (3D-DIC) method was used to measure 3D thermal deformation of a superalloy honeycomb panel sample with a size of 210 mm×210 mm at different times in time-varying thermal radiation environment. Secondly, to ensure the reliability of measurement by using 3D-DIC, a new technique for making large-area high-temperature speckle pattern on a test sample was proposed. The high-temperature speckle pattern stayed stable throughout the experiment and could be used as an effective carrier of thermal deformation. Finally, the largest warping displacement was also calculated by Hoff's equivalent stiffness theory. Study results indicate that in-plane thermal expansion is homogeneous when the panel is heated one-side by radiation heating, while the out-plane displacements show evident axisymmetric warp deformation with the largest warping displacement of approximate 1.6 mm at a temperature of 900℃. The experimental results agree well with theoretical predictions made by Hoff's equivalent stiffness theory.
- superalloy honeycomb panel /
- three-dimensional digital image correlation /
- three-dimensional thermal deformation /
- high-temperature speckle pattern /
- Hoff's equivalent stiffness theory

HTML全文

参考文献(22)

[1]	吴大方, 郑力铭, 潘兵, 等.非线性热环境下高温合金蜂窝板隔热性能研究[J].力学学报, 2012, 44(2):297-307. Wu D F, Zheng L M, Pan B, et al.Research on heat-shielding properties of superalloy honeycomb panel for non-linear high temperature enviromment[J].Chinese Journal of Theoretical and Applied Mechanics, 2012, 44(2):297-307(in Chinese).
[2]	Zenkour A M, Alghamdi N A.Bending analysis of functionally graded sandwich plates under the effect of mechanical and thermal loads[J].Mechanics of Advanced Materials and Structures, 2010, 17(6):419-432.
[3]	刘艳辉, 杜鹏.金属蜂窝夹层板的研究进展[J].机械制造与自动化, 2013, 41(1):9-11. Liu Y H, Du P.Research process of metal honeycomb sandwich boards[J].Machine Building and Automation, 2013, 41(1):9-11(in Chinese).
[4]	刘艳辉, 童国权, 王辉, 等.GH99高温合金蜂窝板的制备及力学性能[J].机械工程材料, 2013, 37(2):82-85. Liu Y H, Tong G Q, Wang H, et al.Preparation and mechanical properties of GH99 high temperature alloy honeycomb plates[J].Materials for Mechanical Engineering, 2013, 37(2):82-85(in Chinese).
[5]	Ko W L.Heat shielding characteristics and thermostructural performance of a superalloy honeycomb sandwich thermal protection system (TPS), NASA/TP-2004-212024[R].Washington, D.C.:NASA, 2004.
[6]	Shiau L C, Kuo S Y.Thermal buckling of composite sandwich plates[J].Mechanics Based Design of Structures and Machines, 2004, 32(1):57-72.
[7]	Fatemi J, Lemmen M.Effective thermal mechanical properties of honeycomb core panels for hot structure applications[J].Journal of Spacecraft and Rockets, 2009, 46(3):514-525.
[8]	Chamis C C, Aiello R A, Murthy P L N.Composite sandwich thermostructural behavior:Computational simulation, AIAA-1986-0948[R].Reston:AIAA, 1986.
[9]	吴大方, 潘兵, 高镇同, 等.超高温, 大热流, 非线性气动热环境试验模拟及测试技术研究[J].实验力学, 2012, 27(3):255-271. Wu D F, Pan B, Gao Z T, et al.On the experimental simulation of ultra-high temperature high heat flux and nonlinear aerodynamic heating environment and thermal-machanical testing technique[J].Journal of Experimental Mechanics, 2012, 27(3):255-271(in Chinese).
[10]	Pan B, Wu D F, Yu L P.Optimization of a three-dimensional digital image correlation system for deformation measurements in extreme environments[J].Applied Optics, 2012, 51(19):4409-4419.
[11]	Pan B, Wu D F, Wang Z Y, et al.High-temperature digital image correlation method for full-field deformation measurement at 1 200℃[J].Measurement Science and Technology, 2011, 22(1):015701.
[12]	吴大方, 房元鹏, 张敏.高速飞行器瞬态气动热试验模拟系统[J].航空计测技术, 2003, 23(1):9-11. Wu D F, Fang Y P, Zhang M.Experimental simulation system of transient aerodynamic heating for high-speed flight vehicle[J].Aviation Metrology and Measurement Technology, 2003, 23(1):9-11(in Chinese).
[13]	Sutton M A, Orteu J J, Schreier H W.Image correlation for shape, motion and deformation measurements[M].Berlin:Springer, 2009:175-208.
[14]	潘兵, 谢惠民, 李艳杰.用于物体表面形貌和变形测量的三维数字图像相关方法[J].实验力学, 2008, 22(6):556-567. Pan B, Xie H M, Li Y J.Three-dimensional digital image correlation method for shape and deformation measurement of an object surface[J].Journal of Experimental Mechanics, 2008, 22(6):556-567(in Chinese).
[15]	张广军.机器视觉[M].北京:科学出版社, 2005:122-125. Zhang G J.Machine vision[M].Beijing:Science Press, 2005:122-125(in Chinese).
[16]	Zhang Z Y.A flexible new technique for camera calibration[J].IEEE Transactions on Pattern Analysis and Machine Intelligence, 2000, 22(11):1330-1334.
[17]	Pan B, Qian K M, Xie H M, et al.Two-dimensional digital image correlation for in-plane displacement and strain measurement:A review[J].Measurement Science and Technology, 2009, 20(6):062001.
[18]	Pan B.Reliability-guided digital image correlation for image deformation measurement[J].Applied Optics, 2009, 48(8):1535-1542.
[19]	Pan B, Asundi A, Xie H M, et al.Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements[J].Optics and Lasers in Engineering, 2009, 47(7):865-874.
[20]	中国航空材料手册编辑委员会.中国航空材料手册(第二卷)[M].北京:中国标准出版社, 2002:194. China Aeronautical Materials Handbook Redaction Committee.China aeronautical materials handbook (VolumeⅡ)[M].Beijing:Standards Press of China, 2002:194(in Chinese).
[21]	李贤冰, 温激鸿, 郁殿龙, 等.蜂窝夹层板力学等效方法对比研究[J].玻璃钢/复合材料, 2012(S1):11-15. Li X B, Wen J H, Yu D L, et al.The comparative study of equivalent mechanical methods on honeycomb sandwich plate[J].Fiber Reinforced Plastics/Composites, 2012(S1):11-15(in Chinese).
[22]	竹内洋一郎.热应力[M].郭廷玮, 李安定, 译.北京:科学出版社, 1977:358-365. Ichiro T O. Thermal stress[M].Translated by Guo T W, Li A D.Beijing:Science Press, 1977:358-365(in Chinese).