-
摘要:
发动机结冰脱落现象因其随机性和复杂性很难通过计算仿真获得可靠的结果,而冰风洞试验又因其高昂的使用成本限制了该方法的普及。为此建立了一个兼顾可行性及经济性,同时具有一定可靠性的试验方法,即借助冷库环境并利用斜流风机、喷雾耙、温度调节系统等模拟飞行过程中可能面临的结冰环境;以某型号民用飞机涡扇发动机缩比带动力模型为对象,研究不同工况下叶片结冰及冰脱落的特性和规律。在正式试验之前,通过热线风速仪、喷雾激光粒度仪、标准冰刀和金属格栅分别对来流速度、流场中液态水含量、水滴的平均粒径进行了标定。为克服云雾循环/聚集的问题,开发了云雾吸附系统,便于在封闭的冷库环境中维持流场的稳定性。试验结果表明:当转速为2 400 r/min不变时,随着环境温度的降低,冰脱落所需的时间及剩余冰的特征长度均先减小后增大,其拐点出现在-3.5~-5℃的区间内;当环境温度为-7℃不变时,叶片绕转轴的转速越大,冰脱落所需的时间及剩余冰的特征长度均单调减小。
Abstract:Due to the complexity and randomness of the turbofan blade icing shedding characteristics, it is difficult to use computational simulation to obtain reliable results. On the other hand, icing wind tunnel test can hardly be always applied due to its high cost. In this paper, a feasible, economical and reliable test method is proposed by using mixed-flow fan, water spray and temperature control system in the environment of refrigerator to simulate freezing weather condition during real flight. A scaled powered model of a certain civil aircraft turbo-fan-engine is used as research object to study the blade icing and ice shedding characteristics and rules in different working conditions. Before formal test, parameters such as flow velocity, liquid water content, and mean volumetric diameter are calibrated by anemometer, particle sizer, standard ice blade and metallic grille. A fog absorber is created to solve the problem of fog recycling and accumulation, which makes it possible to keep the stability of flow field in an enclosed refrigeratory environment. The test results show that when the rotational speed is fixed at 2 400 r/min, consuming time for shedding and residual ice characteristic length decrease initially and increase afterwards with the decrease of environment temperature. The inflection point appears when the temperature is in the range of -3.5℃— -5℃; when the temperature is fixed at -7℃, the consuming time for ice shedding and the characteristic length of residual ice decrease monotonously with the increase of the rotational speed of blade.
-
表 1 试验条件参数
Table 1. Test condition parameters
参数 设定值 来流速度V∞/(m·s-1) 9 液态水含量LWC/(g·m-3) 1 水滴平均粒径MVD/μm 30 环境温度T/℃ -2, -3.5, -5, -7, -9 叶片转速ω/(r·min-1) 2 400, 2 700, 3 000 表 2 试验车次
Table 2. Test matrix
序号 ω/(r·min-1) T/℃ 1 2 400 -7 2 2 700 -7 3 3 000 -7 4 2 400 -2 5 2 400 -3.5 6 2 400 -5 7 2 400 -9 表 3 不同环境温度下剩余冰特征长度(ω=2 400 r/min)
Table 3. Characteristic length of residual ice in different enviromental temperature (ω=2 400 r/min)
T/℃ Δt/s l′c -2 427.4 0.735 -3.5 325.0 0.389 -5 259.1 0.433 -7 274.0 0.624 -9 360.5 0.904 表 4 不同叶片转速下剩余冰特征长度(T=-7℃)
Table 4. Characteristic length of residual ice in different blade rotational speed (T=-7℃)
ω/(r·min-1) Δt/s l′c 2 400 266.31 0.624 2 700 198.57 0.389 3 000 134.39 0.368 -
[1] AFT.亚航客机失事原因或为结冰导致[N].环球时报, 2015-01-04.AFT.Ice may have vaused AirAsia crash[N].Global Times, 2015-01-04(in Chinese). [2] 中国民用航空局.中国民用航空规章第25部运输类飞机适航标准: CCAR-25-R4[S].北京: 中国民用航空局, 2011: 217.Civil Aviation Administration of China.China civil aviation re-gulation No.25 Airworthiness standards of transport aircraft: CCAR-25-R4[S].Beijing: Civil Aviation Administration of China, 2011: 217(in Chinese). [3] 周宏奎, 余放, 杨坤.航空发动机风扇地面慢车关键结冰温度分析[J].科学技术与工程, 2017, 17(21):324-328. doi: 10.3969/j.issn.1671-1815.2017.21.052ZHOU H K, YU F, YANG K.Critical icing temperature analysis of aircraft engine fan in ground idle[J].Science Technology and Engineering, 2017, 17(21):324-328(in Chinese). doi: 10.3969/j.issn.1671-1815.2017.21.052 [4] RYOSUKE H, MAKOTO Y.Numerical simulation on ice shedding phenomena in turbomachinery[J].Journal of Energy and Power Engineering, 2015, 9(1):45-53. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=CC0214505762 [5] CHEN Y, DONG W, WANG Z L.Numerical simulation of ice shedding from a fan blade[C]//ASME Turbo Expo 2015: Turbine Technical Conference and Exposition.New York: ASME, 2015: V001T01A005. [6] 严晓雪, 朱春玲, 王正之.风力机冰脱落轨迹仿真研究[J].计算机仿真, 2015, 32(10):123-127. doi: 10.3969/j.issn.1006-9348.2015.10.027YAN X X, ZHU C L, WANG Z Z.Numerical simulation of ice shedding from wind turbine[J].Computer Simulation, 2015, 32(10):123-127(in Chinese). doi: 10.3969/j.issn.1006-9348.2015.10.027 [7] BRITTON R K.An overview of shed ice impact studies in the NASA Lewice icing research tunnel[C]//AIAA 31st Aerospace Sciences Meeting and Exhibit.Reston: AIAA, 1993: 1-13. [8] MASON J G, CHOW P, DAN M F.Understanding ice crystal accretion and shedding phenomenon in jet enginesusing a rig test[J].Journal of Engineering for Gas Turbines and Power, 2011, 133(4):169-178. [9] KRAJ A G, BIBEAU E L.Measurement method and results of ice adhesion force on the curved surface of a wind turbine blade[J].Renewable Energy, 2010, 35(4):741-746. doi: 10.1016/j.renene.2009.08.030 [10] KERMANI M, FARZANEH M.Study of influencing factors on ice shedding from power transmission lines[C]//The 13th International Workshop on Atmospheric Icing of Structures, Andermatt, 2009. [11] 李嘉祥, 李宏男, 付兴.输电线路覆冰脱落参数影响研究[J].电力建设, 2016, 37(4):76-83. doi: 10.3969/j.issn.1000-7229.2016.04.012LI J X, LI H N, FU X.Ice-shedding factors of transmission line[J].Electric Power Consturction, 2016, 37(4):76-83(in Chinese). doi: 10.3969/j.issn.1000-7229.2016.04.012 [12] 高扬.国产新支线飞机发动机自然结冰试飞[J].科学技术与工程, 2017, 17(33):188-192. doi: 10.3969/j.issn.1671-1815.2017.33.027GAO Y.The nature icing flight test of domestic advanced region jet aircraft engine[J].Science Technology and Engineering, 2017, 17(33):188-192(in Chinese). doi: 10.3969/j.issn.1671-1815.2017.33.027 [13] STEFANIA T, ANTONI C, AMIRFAZLI A, et al.Investigation of ice shedding properties of superhydrophobic coatings on helicopter blades[J].Cold Regions Science and Technology, 2014, 100:50-58. doi: 10.1016/j.coldregions.2013.12.009 [14] 朱春玲, 朱程香.飞机的结冰及防护[M].北京:科学出版社, 2016:21-23.ZHU C L, ZHU C X.Aircraft icing and its protection[M].Beijing:Science Press, 2016:21-23(in Chinese). [15] 周峰, 张淼, 黄玮.二元翼型结冰数值模拟研究[J].民用飞机设计与研究, 2009(4):4-7. doi: 10.3969/j.issn.1674-9804.2009.04.002ZHOU F, ZHANG M, HUANG W.Icing accretion simulation research for 2D airfoil[J].Civil Aircraft Design and Research, 2009(4):4-7(in Chinese). doi: 10.3969/j.issn.1674-9804.2009.04.002 [16] HAYASHI R, YAMAMOTO M.Numerical simulation on ice shedding phenomenon in turbomachinery[J].Journal of Energy and Power Engineering, 2015(9):45-53. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=CC0214505762 [17] HAYASHI R, YAMAMOTO M.Modelling of ice shedding phenomenon for engine fan icing[J].Transactions of the JSME, 2014, 80(815):CM0209. https://www.jstage.jst.go.jp/article/transjsme/80/815/80_2014cm0209/_article [18] FORTIN G, PERRON J.Ice adhesion models to predict shear stress at shedding[J].Journal of Adhesion Science & Techno-logy, 2012, 26(4-5):523-553. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=JJ0227077097