电磁层析成像中传感器阵列的优化设置

doi:10.13700/j.bh.1001-5965.2019.0246

北京航空航天大学学报 ›› 2020, Vol. 46 ›› Issue (2): 430-438.doi: 10.13700/j.bh.1001-5965.2019.0246

电磁层析成像中传感器阵列的优化设置

岳远里, 刘泽, 武建利, 苗宇, 刘向龙, 王嘉伟

北京交通大学电子信息工程学院, 北京 100044

收稿日期:2019-05-22 发布日期:2020-03-11
通讯作者: 苗宇 E-mail:ymiao@bjtu.edu.cn
作者简介:岳远里,男,硕士研究生。主要研究方向:电磁层析成像;刘泽,男,博士,教授,博士生导师。主要研究方向:过程参数检测、电磁层析成像;苗宇,女,硕士,讲师,博士研究生。主要研究方向:深度学习、电磁层析成像及其应用。
基金资助:
国家自然科学基金（61771041）

Optimization for settings of sensor array in electromagnetic tomography

YUE Yuanli, LIU Ze, WU Jianli, MIAO Yu, LIU Xianglong, WANG Jiawei

School of Electronic Information Engineering, Beijing Jiaotong University, Beijing 100044, China

Received:2019-05-22 Published:2020-03-11
Supported by:
National Natural Science Foundation of China (61771041)

摘要/Abstract

摘要： 电磁层析成像（EMT）中传感器阵列的设置决定了获得的感应电压测量值的数量，对成像的效果有着重要的影响。为了探究传感器设置对成像质量的影响规律，通过改变传感器阵列中线圈的数量及相对位置对传感器阵列进行优化。在COMSOL Multi-physics中建立不同线圈数量的传感器阵列模型，采用不同的成像算法进行成像并比较成像效果，发现适当增加传感器的个数可以提高成像质量，但增加到一定数量则成像效果下降；同时在传感器阵列固定的情况下将传感器阵列按照一定规则进行旋转，发现旋转之后叠加的复合成像效果要优于未旋转的成像效果。该结果对下一步EMT系统设计中传感器阵列的设置具有一定的指导意义。

关键词: 电磁层析成像(EMT), 感应电压, 传感器阵列, 旋转, 成像质量

Abstract: The settings of the sensor array in electromagnetic tomography (EMT) determine the number of induced voltages, which have an important influence on reconstructed image quality. To study the effect of the settings of coils on the quality of reconstructed images, the number and the position of the sensor array are discussed for optimization. In this paper, the models with different numbers of coils and different contributions are established by using COMSOL Multi-physics; the different algorithms are used to image reconstruction and the quality of the constructed images was compared by correlation coefficient. The simulation shows that the image quality improved by increasing the number of sensors, but when increased to a certain number, the image quality will become worse if the number of the coils continue to increase. In order to increase the measurement data instead of increasing the number of the sensor array, the sensor array is rotated. By comparing the image quality before and after rotation, the result shows that the quality of the reconstructed image is obviously improved after the combination. The simulation results can be a guide for the settings of the sensor array in the design of the EMT system in future work.

Key words: electromagnetic tomography (EMT), induced voltage, sensor array, rotated, image quality

中图分类号:

TP23
TP212

岳远里, 刘泽, 武建利, 苗宇, 刘向龙, 王嘉伟. 电磁层析成像中传感器阵列的优化设置[J]. 北京航空航天大学学报, 2020, 46(2): 430-438.

YUE Yuanli, LIU Ze, WU Jianli, MIAO Yu, LIU Xianglong, WANG Jiawei. Optimization for settings of sensor array in electromagnetic tomography[J]. Journal of Beijing University of Aeronautics and Astronautics, 2020, 46(2): 430-438.

参考文献

[1] 王化祥,崔自强,许燕斌,等.电学层析成像技术及应用[C]//2009年中国自动化大会暨两化融合高峰会议,2009:1-13.WANG H X,CUI Z Q,XU Y B,et al.Electrical tomography:State of the art[C]//2009 China Automation Conference and Integration Conference,2009:1-13(in Chinese).
[2] YIN W,PEYTON A J.A planar EMT system for the detection of faults on thin metallic plates[J].Measurement Science and Technology,2006,17(8):2130-2135.
[3] TERZIJA N,YIN W L,GERBETH G,et al.Electromagnetic inspection of a two-phase flow of GaInSn and argon[J].Flow Measurement and Instrumentation,2011,22(1):10-16.
[4] GRIFFITHS H,STEWART W R,GOUGN W.Magnetic induction tomography:A measuring system for biological tissues[J].Annals of the New York Academy of Sciences,1999,873(1):335-345.
[5] PEYTON A J,BECK M S,BORGES A R,et al.Development of electromagnetic tomography (EMT) for industrial applications.Part1:Sensor design and instrumentation[C]//1st World Congress on Industrial Process Tomography,1999:306-312.
[6] ZAKARIA Z,RAHIM R A,SAIFUL M,et al.Advancement in transmitters and sensors for biological tissue imaging in magnetic induction tomography[J].Sensors,2012,12:7126-7156.
[7] BORGES A R,DE OLIVEIRA J E,VELEA J,et al.Development of electromagnetic tomography(EMT) for industrial applications.Part2:Image reconstruction and software framework[C]//1st World Congress on Industrial Process Tomography,1999:14-17.
[8] PEYTON A J,YU Z Z,LYON G,et al.An overview of electromagnetic inductance tomography:Description of three different systems[J].Measurement Science and Technology,1993,7(3):261-271.
[9] LIU Z,LI W,XUE F,et al.Electromagnetic tomography rail defect inspection[J].IEEE Transactions on Magnetics,2015,51(10):1-7.
[10] XIE C G,HUANG S M,HOYLE B S,et al.Electrical capacitance tomography for flow imaging:System model for development of image reconstruction algorithms and design of primary sensor[J].IEEE Proceedings G,1992,139(1):89-98.
[11] KTISTIS C,ARMITAGE D W,PEYTON A J.Calculation of the forward problem for absolute image reconstruction in MIT[J].Physiological Measurement,2008,29:455-464.
[12] XIONG H L,XU L A.Electromagnetic tomography(EMT):Theoretical analysis of the forward problem[J].Applied Mathematics and Mechanics(English Edition),2000,21(9):1034-1044.
[13] YIN W L,PEYTON A J,STEFANI F,et al.Theoretical and numerical approaches to the forward problem and sensitivity calculation of a novel contactless inductive flow tomography(CIFT)[J].Measurement Science and Technology,2009,20(10):105503.
[14] 徐凯,陈广,尹武良,等.基于场量提取法的电磁层析成像系统的灵敏度推算[J].传感技术学报,2011,24(4):543-547.XU K,CHEN G,YIN W L,et al.Sensitivity estimation of electromagnetic tomography system based on field volume extraction method[J].Journal of Transduction Technology,2011,24(4):543-547(in Chinese).
[15] LIU Z J,BABOUT L,BANASIAK R,et al.Effectiveness of rotatable sensor to improve image accuracy of ECT system[J].Flow Measurement and Instrumentation,2010,21(3):219-227.
[16] YANG W Q,PENG L H.Image reconstruction algorithm for electrical capacitance tomography[J].Measurement Science and Technology.2003,14(1):1-13.
[17] LI F,ABASCAL J F P J,DESCO M,et al.Total variation regularization with Split Bregman-based method in magnetic induction tomography using experimental data[J].IEEE Sensors Journal,2017,14(1):976-986.
[18] LIU L,SHAO F Q.Modified conjugate gradient algorithm for image reconstruction of electromagnetic tomography[J].Chinese Journal of Scientific Instrument,2010,31(3):655-658.
[19] XIE C G,HUANG S M,LENN C P,et al.Experimental evaluation of capacitance tomographic flow imaging systems using physical models[J].IEE Proceedings Circuits Devices and Systems,1994,141(5):357-368.
[20] 陈晓艳,常晓敏.基于评价指标的EIT算法参数选择方法研究[J].天津科技大学学报,2016,31(6):64-68.CHEN X Y,CHANG X M.Study on parameter selection method of EIT algorithm based on evaluation index[J].Journal of Tianjin University of Science and Technology,2016,31(6):64-68(in Chinese).

电磁层析成像中传感器阵列的优化设置

Optimization for settings of sensor array in electromagnetic tomography

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	吴诗彤, 闫勇, 钱相臣. 静电传感器测量固体颗粒质量流量实验研究[J]. 北京航空航天大学学报, 2019, 45(8): 1575-1581.
[2]	邵振宇, 姜兴刚, 张德远, 耿大喜, 李少敏, 刘大鹏. CFRP旋转超声辅助钻削的缺陷抑制机理及实验研究[J]. 北京航空航天大学学报, 2019, 45(8): 1613-1621.
[3]	覃文隆, 樊未军, 石强, 徐汉卿, 张荣春. 垂直旋转圆盘边缘液体形态[J]. 北京航空航天大学学报, 2019, 45(6): 1203-1210.
[4]	叶文, 翟风光, 蔡晨光, 李建利. 基于状态量扩维的旋转式捷联惯导系统精对准方法[J]. 北京航空航天大学学报, 2019, 45(5): 912-918.
[5]	刘泽, 肖君, 刘向龙, 赵鹏飞, 李勇, 霍继伟. 一种电磁层析图像快速重建算法[J]. 北京航空航天大学学报, 2018, 44(8): 1569-1576.
[6]	鲍锋, 曾华轮, 邹赫, 刘锦生, 刘志荣, 朱睿. 同轴旋转圆台环隙流动机制及实验研究[J]. 北京航空航天大学学报, 2018, 44(8): 1577-1586.
[7]	陈伟, 孙传杰, 冯高鹏, 拜云山. 基于滚动时域优化的旋转弹解耦控制器设计[J]. 北京航空航天大学学报, 2018, 44(4): 717-724.
[8]	龚雅静, 王君, 汪泉, 毕树生, 任军, 孙金风. 一种带移动副平面六连杆机构分支识别方法[J]. 北京航空航天大学学报, 2018, 44(3): 645-652.
[9]	余建波, 吕靖香, 程辉, 孙习武, 吴昊. 基于ITD和改进形态滤波的滚动轴承故障诊断[J]. 北京航空航天大学学报, 2018, 44(2): 241-249.
[10]	丁水汀, 蒲俊宇, 邱天, 于航. 带旋转孔容腔瞬态演化与建模方法研究[J]. 北京航空航天大学学报, 2017, 43(9): 1721-1731.
[11]	李哲, 张德远, 姜兴刚. 钛合金旋转超声辅助钻削的出口毛刺[J]. 北京航空航天大学学报, 2017, 43(7): 1380-1386.
[12]	马纲, 杨卫如. 双向旋转柱面气膜密封性能数值模拟与参数优化[J]. 北京航空航天大学学报, 2016, 42(11): 2279-2288.
[13]	童朝霞, 王勃, 左照坤, 姚仰平. 应力主轴旋转下砂土力学特性的数值模拟分析[J]. 北京航空航天大学学报, 2015, 41(6): 976-981.
[14]	吴孟龙, 常士楠, 冷梦尧, 王超. 基于欧拉法模拟旋转帽罩水滴撞击特性[J]. 北京航空航天大学学报, 2014, 40(9): 1263-1267.
[15]	孟繁智, 史鹏亮, 欧钢. 自主导航星座旋转误差的差分校正技术[J]. 北京航空航天大学学报, 2014, 40(8): 1033-1037.