北京航空航天大学学报 ›› 2009, Vol. 35 ›› Issue (9): 1048-1051.

• 论文 • 上一篇    下一篇

软件定义的GNSS反射信号接收机设计

杨东凯, 丁文锐, 张其善   

  1. 北京航空航天大学 电子信息工程学院, 北京 100191
  • 收稿日期:2009-02-27 出版日期:2009-09-30 发布日期:2010-09-14
  • 作者简介:杨东凯(1972-),男,山东莱芜人,副教授,edkyang@buaa.edu.cn.
  • 基金资助:

    国家863计划资助项目(2007AA12Z340)

Software defined GNSS reflections receiver design

Yang Dongkai, Ding Wenrui, Zhang Qishan   

  1. School of Electronics and Information Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
  • Received:2009-02-27 Online:2009-09-30 Published:2010-09-14

摘要: 分析了导航卫星反射信号的特点,给出了反射信号软件接收机的总体结构及其主要模块,主要包括接收直射和反射信号的天线、射频前端和高速A/D变换器,以及数据处理用的计算机.重点介绍了反射信号处理的基本过程,其中主要讨论了本地反射信号C/A码的生成模式,在此基础上分析了反射信号相关功率的计算方法,并给出了具体的仿真计算实例.设计了反射信号处理的具体实现软件,包括详细的流程图,关键参数和主要函数的定义及用户界面,利用实际采集的数据进行了验证,结果表明所设计的反射信号接收机运行稳定,能根据用户输入的不同参数提供导航卫星反射信号的相关功率输出.

Abstract: The characteristics of navigation satellite reflected signal was analyzed. Both the architecture and the components for GNSS (global navigation satellite system) reflections receiver were presented including the two antennas, two RF (radio frequency) front ends, two high speed A/D converter and the computer for data processing. The basic reflections processing workflow was elaborated on, where C/A code generation for the reflected signal was mainly discussed following the correlation power computation with one simulation example. The software was designed and its detailed flowchart, key parameters and functions definition, user interface were also proposed. Field test data were feed into the designed software receiver, and the displayed result show that the receiver runs stably. And it can give correlation power with user defined different parameters.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发