北京航空航天大学学报 ›› 2007, Vol. 33 ›› Issue (10): 1158-1161.

• 论文 • 上一篇    下一篇

开槽交错肋通道换热和流阻特性

邓宏武,潘文艳,陶智,丁水汀   

  1. 北京航空航天大学 能源与动力工程学院, 北京 100083
  • 收稿日期:2006-10-24 出版日期:2007-10-31 发布日期:2010-09-17
  • 作者简介:邓宏武(1973-),男,陕西咸阳人,副教授,Denghw@buaa.edu.cn.
  • 基金资助:

    国家自然科学基金资助项目(50606002)

Heat transfer and flow resistance in a notched crossed-rib channel

Deng Hongwu, Pan Wenyan, Tao Zhi, Ding Shuiting   

  1. School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2006-10-24 Online:2007-10-31 Published:2010-09-17

摘要: 对一种特殊结构的涡轮叶片内冷通道——开槽交错肋通道进行了换热和流阻的测量实验.全部的实验都在静止的状态下完成,其中换热实验采用了水蒸气凝结换热方案.实验的 Re数范围从5000~45000,得到了大量关于开槽交错肋涡轮叶片内冷通道的实验数据,并将结果与不开槽交错肋通道作出对比,得出一定槽宽的开槽交错肋通道相比于相同尺寸的不开槽交错肋通道,换热效果有了明显的提高,而流阻系数相应有所减小,所以整体换热效果优于不开槽通道.此外,对于不同槽宽通道的各项特性也进行了实验对比.得出 4mm开槽交错肋通道的换热效果最好,接下来依次是2mm、6mm和8mm的通道.

Abstract: The investigation of heat transfer, flow resistance and the pressure across the channel in turbulator cooling channel with a special crossed-rib channel which has slots was studied experimentally, then got amount of experimental results. All experiments were made in stillness states. The method of vapor concreting heat transfer was adopted for the heat transfer experiments. The experiment was conducted in the range of Reynolds number from 5000 to 45000. Compared with the channels which are no slots, the same dimensions ones with slots have more significant effects on the whole heat transfer enhancement. Besides, the experimental comparisons of characteristics were made to the different slots width channels. For the channels of different slots width, the heat transfer effects of 4mm slot width channel are best, the following are 2mm, 6mm and 8mm in turn.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发