北京航空航天大学学报 ›› 2007, Vol. 33 ›› Issue (10): 1237-1240.

• 论文 • 上一篇    下一篇

一种可靠性试验实测振动数据的处理方法

罗敏,姜同敏,袁宏杰   

  1. 北京航空航天大学 工程系统工程系, 北京 100083
  • 收稿日期:2006-10-18 出版日期:2007-10-31 发布日期:2010-09-17
  • 作者简介:罗 敏(1980-),女,四川内江人,博士生,ruthluomin@126.com.
  • 基金资助:

    十一五国防预研项目(51319030301)

Method for inducing reliability test measured vibration data

Luo Min, Jiang Tongmin, Yuan Hongjie   

  1. Dept. of System Engineering of Engineering Technology, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
  • Received:2006-10-18 Online:2007-10-31 Published:2010-09-17

摘要: 针对传统实测振动数据归纳方法只能处理正态分布数据的问题,引入选择约翰逊曲线的方法,采用约翰逊曲线对非正态情形的实测振动数据进行拟合,给出了非正态情形一定概率下的实测振动数据功率谱密度上限.在此基础上提出了一种可靠性试验实测振动数据的处理方法.将该方法用于某产品可靠性试验实测振动数据的处理中,计算结果表明,该方法不仅能给出任意分布实测振动数据功率谱密度概率上限,而且与传统方法比较,给出的数据上限能更真实反映产品振动环境条件.

Abstract: To solve the problem of traditional inductive method for measured random vibration data only applying to normal distribution data, the way for selecting the suitable curve in Johnson curves family was introduced, and the method of fitting measured non-normal random vibration data by Johnson curves family was researched. Then, power spectrum density(PSD)upper probability limit of measured non-normal random vibration data was given by using it. Based on these results, a new method for inducing reliability test vibration force was developed. Some product measured random vibration data induction result shows that the method can give a reasonable PSD upper probability limit of measured random vibration data with any distribution successfully. Furthermore, comparing with traditional normal-based data inductive method, the result of the method is more reliable for characterizing vibration environment condition.

中图分类号: 


版权所有 © 《北京航空航天大学学报》编辑部
通讯地址:北京市海淀区学院路37号 北京航空航天大学学报编辑部 邮编:100191 E-mail:jbuaa@buaa.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发