Direct numerical simulations of turbulent channel flows with spanwise moving wall
-
摘要: 为了解展向存在匀速流动时湍流槽道流动的特性,应用直接数值模拟方法研究了壁面的展向运动对湍流槽道流动的影响.采用标准谱方法对固定质量流率条件下,上壁面展向运动速度分别等于零、流向流量平均速度以及两倍于流向流量平均速度等3种情况进行了直接数值模拟.结果表明,壁面的展向运动会导致表面摩擦力的增大,二阶湍流统计量诸如均方根速度脉动、雷诺剪切应力和均方根涡量脉动等都会随着壁面展向运动速度的增大而显著增长,同时,槽道截面上的均方根速度脉动也变得更均匀.Abstract: The influence of spanwise moving wall on turbulent channel flows is investigated using direct numerical simulations(DNS), which in order to know the characteristics of turbulent channel flows when existing spanwise moving velocity. The DNS is performed using the standard spectral method. Three cases with the spanwise wall moving velocity which equals 0, bulk flow velocity and double bulk flow velocity are simulated at constant mass flow rate. The results show that spanwise moving wall induce the skin friction increasing. The second-order turbulence statistics such as root-mean-square velocity fluctuations, Reynolds shear stress and root-mean-square vorticity fluctuations are substantial increase with spanwise velocity increasing. It is also observed that the root-mean-square velocity fluctuations become more even across the channel with spanwise velocity increasing.
-
Key words:
- channel turbulence /
- direct numerical simulations /
- spanwise moving wall
-
[1] Orszag S A, Patterson G S. Numerical simulation of three-dimensional homogeneous isotropic turbulence[J]. Phys Review Lett, 1972, 28 : 76-79 [2] Moin P, Mahesh K. Direct numerical simulation: a tool in turbulence research[J]. Annu Rev Fluid Mech, 1998 , 30 : 535-578 [3] Kim J, Moin P, Moser R. Turbulence statistics in fully developed channel flow at low Reynolds number[J]. J Fluid Mech, 1987, 177 : 133-166 [4] Zhang Zhaoshun, Ma Bing, Cui Guixiang, et al. Flow patterns and dissipation of turbulent kinetic energy in near-wall turbulence[J]. Chinese Science Bulletin, 1998,43: 117-120 [5] He Guowei, Zhang Jinbai. Elliptic model for space-time correlations in turbulent shear flows[J]. Physical Review E, 2006,73(5) : 055303 [6] Zhang Zhaoshun, Cui Guixiang, Shao Liang.New subgrid model for large eddy simulation Zhuang Fenggan, Li Jiachun. Recent Advances in Fluid Mechanics. Beijing : Tsing Hua University Press, 2004 : 22-28 [7] Leveque E, Toschi F, Shao Liang, et al. Shear-improved smagorinsky model for large-eddy simulation of wall-bounded turbulent flows[J]. J Fluid Mech, 2007, 570 : 491-502 [8] 舒桃,陆夕云,杨国伟,等.无限翼展后掠翼大迎角绕流和涡控制的数值模拟[J].空气动力学学报, 2000, 18(3): 247-253 Shu Tao, Lu Xiyun, Yang Guowei, et al. Numerical simulation on viscous flows and vortex control about an infinite span untape swept-wing[J]. Acta Aerodynamica Sinica, 2000,18(3): 247-253 [9] Karniadakis G E, Israeli M, Orszag S A. High-order splitting methods for the imcompressible Navier-Stockes equations[J]. J Com Phys, 1991, 97 : 414-443 期刊类型引用(6)
1. 莫宁宁,冯治国,陶亮,江玉莲,刘勇. TA1薄壁管约束压缩为鼓包的变形行为研究. 材料导报. 2025(10): 201-209 . 百度学术
2. 于清波,李建明,杨月冰,张屿,甘涌泉,刘海波,刘阔. TA15钛合金低温力学性能及J-C本构模型的研究. 工具技术. 2024(04): 77-83 . 百度学术
3. 孟宪国,闫静锴,雒亚涛,周兵营,崔学习,吴向东. 基于M-K理论的NbTiAl合金高温成形极限曲线预测. 精密成形工程. 2023(01): 1-7 . 百度学术
4. 栾伟雄,武小娟,孟凡玲. TA15钛合金不等厚V型材挤压模具设计. 沈阳师范大学学报(自然科学版). 2022(03): 206-211 . 百度学术
5. 蔡旺,钱凌云,孙朝阳,张帅,李明,姚松林. 基于CPFE-MK模型的TWIP钢板成形极限预测. 塑性工程学报. 2021(06): 53-60 . 百度学术
6. 王彦菊,栾伟,孟宝,沙爱学,贾崇林. GH605板料成形极限影响因素分析. 航空材料学报. 2021(05): 60-68 . 百度学术
其他类型引用(5)
-

计量
- 文章访问数: 3649
- HTML全文浏览量: 196
- PDF下载量: 1183
- 被引次数: 11