骑座相贯线焊接机器人运动学分析及仿真

李晓辉; 汪苏

骑座相贯线焊接机器人运动学分析及仿真

李晓辉,
汪苏

北京航空航天大学机械工程及自动化学院, 北京 100191

详细信息

作者简介:
李晓辉(1978－),男,河北保定人,博士生,lixiaohui@me.buaa.edu.cn.

中图分类号: TP 242; TG 409
计量
- 文章访问数: 3730
- HTML全文浏览量: 248
- PDF下载量: 1822
- 被引次数: 0
出版历程
- 收稿日期: 2007-07-18
- 网络出版日期: 2008-08-31

Kinematic analysis and simulation of saddle-back coping welding robot

Li Xiaohui,
Wang Su

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 针对复杂相贯线曲线机器人自动焊接的特殊要求,开发了骑座式相贯线焊接机器人,并通过对机器人结构进行合理简化建立了机器人的D-H连杆坐标系.根据D-H连杆坐标系,推导了机器人的运动学正解方程和逆解方程,并结合机器人关节变量的取值范围,确定了逆解的唯一性.然后通过Matlab仿真软件对机器人的运动学进行了仿真,结果表明所得的机器人正、逆运动学方程完全正确.仿真误差表明所得结果完全可以满足工程需要,为相贯线焊接机器人的轨迹控制和离线编程提供了依据和算法支持.
- 相贯线 /
- 焊接机器人 /
- 运动学仿真
Abstract: Aiming at the special request of complicated intersection line robot welding, a kind of saddle-back coping welding robot was presented, which has five axes. The robot mechanistic structure was reduced essentially and rationally. The five-axis robot D-H (Denavit-Hartenberg) links- coordinates were established with the reduced robot mechanistic structure. Then the forward solution and the inverse kinematics equations were built according to D-H links- coordinates. The singular solution of inverse kinematics equations was educed associated with the kinematic parameters change range. Programming in the Matlab software according to the forward solution and inverse kinematics equations, the five-axis robot kinematic analysis was simulated. The simulative calculations results indicate that forward solution and inverse kinematics equations are completely accurate. And the simulation accuracy shows that the solution of inverse kinematics equations satisfies the welding project well. It is very important to welding robot and can provide a theoretical basis and supports algorithm for trajectory regulation and off-line programming.
- intersection line /
- welding robot /
- kinematic simulation

HTML全文

参考文献(1)

[1] 姚杰.机器人在焊接相贯线时的无碰撞轨迹规划[J].机械工程与自动化,2006, 27:73-74 Yao Jie. Collision-free trajectory planning in 3-D space for welding robot[J]. Mechanical Engineering ＆ Automation, 2006,27:73-74(in Chinese)  [2] 霍孟友,岳少剑,王新港.复杂相贯线接缝自动焊接的运动控制算法[J]. 焊接学报,2006, 27(12):9-12 Huo Mengyou, Yue Shaojian, Wang Xingang. Movement control algorithm of automatic welding for complex intersection seam[J]. Transactions of the China Welding Institution,2006,27(12):9-12(in Chinese)  [3] 陈强,路井荣,孙振国,等.弧焊机器人焊炬姿态规划系统的研究[J].中国机械工程,2002,13(11):956-958 Chen Qiang, Lu Jingrong, Sun Zhenguo, et al. Study on torch pose planning system for arc welding robot[J]. China Mechanical Engineering, 2002,13(11):956-958(in Chinese)  [4] 陈志翔,卢振洋,殷树言,等.焊缝位姿及焊枪位姿的模型[J].机械工程学报,2003,39(7):59－62 Chen Zhixiang, Lu Zhenyang, Yin Shuyan, et al. Models of weld pose and welding gun pose[J]. Chinese Journal of Mechanical Engineering, 2003,39(7):59-62(in Chinese)  [5] Maekawa Hitoshi, Yamamoto Katsushi, Nakata Shuji. Torch trajectory generation along weld line in off-line programming system of arc welding robot[J]. Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1989, 7: 102-109  [6] Ventzas D E. Computer control software for pipe line construction industry[J]. Modelling, Measurement & Control B, 1994, 53:1-11  [7] Li W, Jaschek H, Wloka D. Modification of the roberts- algorithm for the graphical animation of robots[J]. Robotersysteme, 1990, 6:76-80  [8] Zhang Hua. Study of pedrailed intelligent arc welding robot system[J]. Robot Technique and Application, 2002(1):13-16  [9] Jiang Lipei. Flexible magnetic wheel type intelligent welding robot for spherical tank[J]. Chinese Journal of Mechanical Engineering, 2002(2):173-176  [10] 吴林,孔宇.焊接位置与焊丝方位定义的讨论及几何建模研究[J]. 机械工程学报,1997,33(5):49-53 Wu Lin, Kong Yu. Definition and geometric model of welding position and torch orientation[J]. Chinese Journal of Mechanical Engineering,1997,33(5):49-53(in Chinese)

施引文献

资源附件(0)

访问统计