A Combined Method of High Precision Temperature Control
-
摘要: 介绍了一种用于高精度温度控制的复合方法及其在恒温槽上的成功应用.该方法集Fuzzy逻辑和专家式智能PID(比例、积分、微分)控制于一体,充分运用了专家的人工调节经验和PID控制的定量调节特性,较好地满足了高精度控温中的高精度与快速性要求.采用了简单新颖的PID参数在线修正和温度变化预报方法,易于实现.用于恒温槽时控制精度优于0.01℃.实践证明该方法在高精度控温中具有良好的控制效果.Abstract: A combined method of high precision temperature control and its application in a constant temperature trough were presented. Combining Fuzzy logic with intelligent PID control of expert type, the method fully utilizes the expert's experience of manual manipulating and quantitative operating feature of PID control. Therefore, it could meet the precision and adjusting time requirements in high precision temperature control. Moreover, a novel and simple model to modify PID parameters and a method to predict the change of temperature on-line were introduced, which are easy to implement. When used in a constant temperature trough, the control accuracy of the combined method is even smaller than 0.01℃.
-
Key words:
- temperature control /
- fuzzy logic /
- PID control /
- intelligent control /
- high precision control
-
[1] Dayhoff J. Neural network architectures: an introduction[M]. New York:Van Nostrand Reinhold, 1990. [2] Zurada J M. Introduction to artificial neural systems[M]. New York: West Publ, 1992. [3] Roy S, Anantheswaran R, Shenk J. Determination of moisture content of mushrooms by spectroscopy[J]. J Sci Food Agric, 1993,63(3):355~360． [4] Delwiche S,Mckenzie K,Webb B. Quality characteristics in rice by NIR reflectance analysis of wholegrain milled samples[J]. Cereal Chem,1996,73(2):257~263. [5] Zhang Y,Kovacevic R. Realtime sensing of sag geometry during GTA welding[J]. Journal of Manufacturing Science and Engineering,1997,119(2):151~160. [6] Theodoracatos V E, Calkins D E． A 3-D vision system model for automatic object surface sensing[J]． International Journal of Computer Vision,1993,11(1):75~99. [7] 邓文怡,吕乃光. 三维测量技术中采用的反向传播神经网络方法[J]. 华中理工大学学报,1999,27(1):78~80. [8] Chang M,Tai W. 360-deg profile noncontact measurement using a neural network[J]. Optical Engineering,1995,34(12):3572~3576. [9] 任大海. X射线实时成象检测技术及其在焊缝探伤中应用的研究 . 天津:天津大学研究生院, 1998． [10] 杨国田,张 玉. 基于神经网络的表面粗糙度识别算法在单片机系统上的实现[J]．仪器仪表学报,1998,19(6):645~647. [11] 熊有伦. 精密测量的数学方法[M]. 北京: 中国计量出版社,1989． [12] 田社平, 林良明. 基于神经网络的球半径测量[J]. 计量学报, 1998,19(3):170~174． -
点击查看大图
计量
- 文章访问数: 2580
- HTML全文浏览量: 42
- PDF下载量: 845
- 被引次数: 0
下载:
