Volume 33 Issue 07
Jul.  2007
Turn off MathJax
Article Contents
Wang Rui, Zhuang Damin. Simulation and analysis of pilots′ manipulation based on SimMechanics[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(07): 765-768. (in Chinese)
Citation: Wang Rui, Zhuang Damin. Simulation and analysis of pilots′ manipulation based on SimMechanics[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(07): 765-768. (in Chinese)

Simulation and analysis of pilots′ manipulation based on SimMechanics

  • Received Date: 30 Mar 2006
  • Publish Date: 31 Jul 2007
  • According to human dimensions of chinese male pilot and the chinese manhood anthropometric data, the rigid model for the pilot′s upper limbs was established. Referring to the requirement about cabin layout in GJB and flight quality criterion in HB, Two operation movements of the pilot, pulling and pushing stick, were simulated using SimMechannics which is a simulation module of Matlab. Analysis type is inverse dynamics. When work load and athletic rule of end effectors are given, the actual joints′ torques could be ciphered out by simulation, and then the three-dimensional comfortable manipulation area could be acquired according to given comfort criterion. The result suggests that workload isn′t changed, but the calculated area in the case of pushing stick is different from that of pulling stick. Therefore, there is a correlation between manipulation characters and the range of comfortable manipulation area. When dealing with pilots′ ergonomics evaluation or optimizing cockpit layout design, It is necessary to analyze matters with an eye to manipulation characters.

     

  • loading
  • [1] 郑秀瑗. 现代运动生物力学[M]. 北京:国防工业出版社, 2002 Zhen Xiuyuan. Modern biologic dynamics[M]. Beijing:National Defence Industry Press, 2002(in Chinese) [2] Pandya A K. Hasson S M. Correlation and prediction of dynamic human isolated joint strength from lean body mass .N92-26682, American:National Aeronautics and Space Administration,1992 [3] 丁玉兰,郭刚,赵江红. 人机工程学[M].北京:北京理工大学出版, 2000 Ding Yulan,Guo Gang,Zhao Jianghong. Human-machine engineering[M].Beijing:Beijing Institute of Technology Press, 2000(in Chinese) [4] 阮宝湘,邵祥华. 工业设计人机工程[M]. 北京:机械工业出版社, 2005 Ruan Baoxiang, Shao Xianghua. Human-machine engineering for industry design[M].Beijing:China Machine Press, 2005(in Chinese) [5] 蔡自兴. 机器人学[M].北京:清华大学出版社, 2000 Cai Zixing. Robotics[M].Beijing:Tsinghua University Press, 2000(in Chinese) [6] 任毅,王隆基,谢进,等.基于SimMechanics 的平面铰链链四杆机构控制系统计算机仿[J].机械,2004,31(8):27-29 Ren Yi, Wang Longji, Xie Jin, et al. Computer simulation of plannar four bar mechanism-s control system based on simmechanics[J].Mechanism, 2004,31(8):27-29(in Chinese) [7] 董玉红,张立勋. 基于双超越离合器和SimMechanics的合作机器人建模与仿真[J].哈尔滨工程大学学报,2005,26(5):596-602 Dong Yuhong, Zhang Lixun. Modeling and simulation of robot based on double over-running clutches and SimMechanics[J]. Journal of Harbin Engineering University, 2005, 26(5):596-602(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(2663) PDF downloads(1306) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return