Citation: | Wang Kai, Wang Zhanlin, Qiu Lihua, et al. Hydraulic simulator outer gimbal FNN controller design and simulation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(05): 571-574. (in Chinese) |
[1] 王旭永.三轴转台外框电液位置伺服系统低速运动的研究 .哈尔滨:哈尔滨工业大学 电学院,1993 Wang Xuyoung. Research on low speed motion of electrohydraulic position servo system applied to the three-axis simulator outer gimbal .Harbin:Harbin Institute of Technology,School of Electromechanical Engineering,1993(in Chinese) [2] 付永领.三轴转台中框架双电液伺服马达同步驱动的研究 .哈尔滨:哈尔滨工业大学 电学院,1993 Fu Yongling.Research on dual electrohydraulic servo motors synchronizing drive of three-axis simulator middle gimbal . Harbin:Harbin Institute of Technology,School of Electromechanical Engineering,1993(in Chinese) [3] Tomizuka M, Hu J S, Chiu T C, et al. Synchronization of two motion control axes under adaptive feedforward control[J].Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME,1992,114(2):196-203 [4] 李洪仁.液压控制系统[M].北京:国防工业出版社,1990:111-113 Li Hongren.Hydraulic control system[M].Beijing:National Defense Industry Press,1990:111-113(in Chinese) [5] 张友旺,桂卫华.基于自适应模糊神经网络的摩擦力分部补偿算法[J].控制与决策,2005,20(3):357-359 Zhang Youwang, Gui Weihua. Partition compensation for friction based on adaptive fuzzy neural network[J].Control and Decision,2005,20(3):357-359(in Chinese) [6] Schilling R J, Carroll J J. Approximation of nonlinear systems with radial basis function neural networks [J].IEEE Transactions on Neural Networks,2001,12(1):1-15
|