FOG ring modules thermal analysis based on thermoelectric analogy
-
摘要: 为分析光纤陀螺(FOG,Fiber-Optic Gyroscope)受外界环境变化温度影响导致产生Shupe误差,采用热电类比法对不同结构形式的光纤环(FOR,Fiber Optical Ring)模块进行热分析,比较对应的电路模型,提出并联的热容和串联的电阻是影响FOG温度性能的关键因素.采用有限元热仿真定性分析了并联的热容和串联的电阻对FOG温度的影响,验证了电路模型的正确性;在与热仿真相同条件下,通过温箱实验,将FOR温度变化与FOG输出性能建立关联.结果表明,通过加大FOR模块连接处的串联热阻和并联热容,可有效降低FOR的瞬时温差,尤其是较大的热容能有效减小FOR温变速率,从而减小Shupe误差,改善FOG的温度性能.Abstract: For the fiber-optic gyroscope (FOG) was easily influenced by the ambient temperature resulting Shupe bias, the thermoelectric analogy method was applied to do the thermal analysis of different structural fiber optic ring (FOR) modules. The principle that the parallel heat capacity and series resistance were the key factor on the FOG thermal performance was proposed by comparing the corresponding circuit model. The parallel heat capacity and series resistance affecting the FOG temperature qualitatively was analyzed and the correctness of the circuit model was verified via finite element thermal simulation. In the same condition with the thermal simulation, the FOR temperature was associated with the FOG output performance after a temperature test cabinet experiment. The results show that increasing the parallel heat capacity and series resistance in FOR modules can reduce the ambient temperature effect on the FOR. Especially, the larger heat capacity can effectively reduce the FOR temperature change rate, thereby reducing the Shupe bias and improving the FOG thermal performance.
-
[1] Herve C L. The fiber optic gyroscopes[M].Norwood:Artech House,1993 [2] 赵忠华,江红, 张炎华.小波理论及其在光纤陀螺信号分析中的应用[J].上海交通大学学报,2000,34(11):1598-1600 Zhao Zhonghua,Jiang Hong,Zhang Yanhua.Wavelet theory and its application in analysis of fiber-optic gyroscope[J].Journal of Shanghai Jiaotong Universitys,2000,34(11):1598-1600(in Chinese) [3] Miao L J, Zhang F S,Shen J, et al.Data analysis and modeling of fiber optic gyroscope drift[J].Journal of Beijing Institute of Technology,2002,11(1):50-54 [4] Jerold P G, Lawrence F,Ernest N.Three-axis nested fiber optic gyroscope:US,6198094[P]. 2001-03-06 [5] Tawney J, Hakimi F,Willig R L,et al.Photonic crystal fiber IF-OGs[C]//Optical Fiber Sensors.Cancun, Mexico:Optical Society of America,2006 [6] 王瑞,李绪友, 张勇.用于高精度光纤陀螺的光纤放大器光源[J].红外与激光工程,2008,37(4):732-734 Wang Rui,Li Xuyou,Zhang Yong.Fiber amplifier source for high accurate fiber-optic gyroscope[J].Infrared and Laser Engineering,2008,37(4):732-734(in Chinese) [7] Choi W S. Analysis of temperature dependence of thermally induced transient effect in interferometric fiber-optic gyroscopes[J].Journal of the Optical Society of Korea,2011,15(3): 237-243 [8] Williams M. Crossover-free fiber optic coil sensor and winding method:US,7477806[P]. 2009-01-13 [9] 宋凝芳,关月明, 贾明.光纤陀螺光纤环Shupe误差的多参数影响仿真分析[J].北京航空航天大学学报,2011,37(5):569-573 Song Ningfang,Guan Yueming,Jia Ming.Analysis of multi-parameters effect on Shupe error in fiber optic gyroscope fiber coil[J].Journal of Beijing University of Aeronautics and Astronautics,2011,37(5):569-573(in Chinese) [10] Paschkis V, Baker H D.A method for determining unsteady-state heat transfer by means of an electrical analogy[J].Transactions of the American Society of Menchanical Engineers,1942,64:105-112 [11] 杨明伟,许文海, 唐文彦.热电制冷器的等效电路模拟与分析[J].红外与激光工程,2007,36(2):281-285 Yang Mingwei,Xu Wenhai,Tang Wenyan.Modeling and analysis of thermoelectric cooler by equivalent circuit method[J].Infrared and Laser Engineering,2007,36(2):281-285(in Chinese) [12] 张诚. 混凝土辐射供冷非稳态传热简化模型构建及相关研究[D].天津:天津大学,2010 Zhang Cheng.Establishment and study on the simplified model of unsteady heat transfer of concrete radiant cooling systems[D].Tianjin:Tianjin University,2010(in Chinese)
点击查看大图
计量
- 文章访问数: 1076
- HTML全文浏览量: 71
- PDF下载量: 588
- 被引次数: 0