Improving the capability of k-ωSST turbulence model for predicting stall characteristics of airfoil
-
摘要: 采用CFD软件fluent,k-ω SST模型对S825翼型进行了二维数值模拟.针对k-ω SST模型对翼型分离失速特性模拟不准的情况,对分离区域内湍流的强非平衡输运特性进行了分析.研究表明:原始模型由于不能准确模拟分离区内湍流的强非平衡输运特性,导致其对翼型失速特性模拟失效;提出了通过修正模型系数a1及β∞*,提高k-ω SST模型预测非平衡湍流输运特性的方法,从而提高对翼型失速特性的模拟精度.Abstract: Two-dimensional numerical simulations of NREL airfoil S825 with k-ωSST turbulence model were conducted. For the k-ωSST turbulence model could not predict the airfoil aerodynamic performance accurately at stall conditions, the non-equilibrium turbulence transport nature was systematically analyzed. It was found that: the mis-predicting of the stall characteristics was due to the fact that the tradition turbulence model could not accurately predict the strongly non-equilibrium turbulence transport nature. Correcting the constant a1 or β∞* could improves obviously the capability of prediction stall characteristics of k-ω SST turbulence model,because by giving a more reasonable turbulence transport nature, the capability of k-ω SST model in capturing the non-equilibrium turbulence was improved notably.
-
[1] 贺德馨.风工程与工业空气动力学[M].北京:国防工业出版社,2006:118-123 He Dexin.Wind engineering and industrial aerodynamics[M].Beijing:National Defence Industrial Press,2006:118-123(in Chinese) [2] Wolfe W P,Ochs S S.CFD calculations of S809 aerodynamic characteristics[R].AIAA 1997-0973,1997 [3] Eleni D C,Athanasios T I,Dionissios M P.Evaluation of the turbulence models for the simulation of the flow over a national advisory committee for aeronautics (NACA) 0012 airfoil[J].Journal of Mechanical Engineering Research,2012,4(3):100-111 [4] Langtry R B,Gola J ,Mente F R.Predicting 2D airfoil and 3 D wind turbine rotor performance using a transition model for general CFD codes[R].AIAA-2006-395,2006 [5] Shelton A,Abras J,Hathaway B E,et al.An investigation of the numerical prediction of static and dynamic stall[C]//American Helicopter Society 61st Forum.Grapevine,TX,United States:[s.n.],2005 [6] Shelton A,Abras J,Jurenko R,et al.Improving the CFD predictions of airfoils in stall[R].AIAA-2005-1227,2005 [7] 马林静,陈江.风力机翼型气动特性数值模拟[J].太阳能学报,2010,31(2):203-209 Ma Linjing,Chen Jiang.Numerical simulation of aerodynamic performance for wind turbine airfoils[J].ACTA Energlae Solaris Sinica,2010,31(2):203-209(in Chinese) [8] Lu Lipeng,Wang Danhua,Liu Yangwei.Modification of S-A model for predicting corner separation flows in axial compressor[C]//ACFD0149-T008-A-001,The 8th Asian Computational Fluid Dynamics Conference.Hong Kong :[s.n.],2010 [9] Somers Dan M.Design and experimental results for the S825 airfoil[R].NREL/SR-500-36346,2005 [10] Mansour N N,Kim J,Moin P.Reynolds-stress and dissipation rate budgets in a turbulent channel flow[J].J Fluid Mech,1988,194:15-44 [11] Menter F R.Two-equation eddy-viscosity turbulence models for engineering applications[J].AIAA Journal,1994,32(8):269-289 [12] Menter F R.Performance of popular turbulence models for attached and separated adverse pressure gradient flows[J].AIAA Journal,1992,30:2066-2072 [13] Wilcox D C.Turbulence model for CFD[M].California:DCW Industries,Inc,2007:155-156 [14] Townsend A A R.The structure of turbulent flow[M].England:Cambridge University Press,1976:49-53 -
点击查看大图
计量
- 文章访问数: 2326
- HTML全文浏览量: 273
- PDF下载量: 540
- 被引次数: 0
下载:
