基于涂层传感器的金属结构疲劳裂纹监测

侯波; 何宇廷; 崔荣洪; 丁华

基于涂层传感器的金属结构疲劳裂纹监测

空军工程大学航空航天工程学院, 西安 710038

基金项目: 国家高技术研究发展计划资助项目(2009AA03Z103); 国家自然科学基金资助项目(S1201182)

详细信息

作者简介:
侯波(1986-),男,河北保定人,博士生,bohr_h@163.com.

中图分类号: TP212.1;V215.6
计量
- 文章访问数: 1592
- HTML全文浏览量: 207
- PDF下载量: 586
- 被引次数: 5
出版历程
- 收稿日期: 2012-12-11
- 网络出版日期: 2013-10-30

Fatigue crack monitoring of metallic structure based on coating sensor

Aeronautics and Astronautics Engineering College, Air Force Engineering University, Xi'an 710038, China

摘要

摘要: 针对飞机金属结构在服役过程中的裂纹扩展实时监测需求,提出一种现代表面技术与电位法原理相结合的疲劳裂纹监测研究方案.在结构易出现裂纹的热点部位制备了一种具有绝缘隔离层、导电传感层和封装保护层3层结构的裂纹监测涂层传感器.然后进行了疲劳裂纹监测试验,结果表明:通过分析涂层传感器电阻(电位)的变化可以实现对2A12-T4铝合金连接结构多个部位的裂纹同时进行有效监测.此外,还对表面制备涂层传感器的试样与原始试样的疲劳特性进行了对比研究.结果表明:应用现代表面技术在2A12-T4铝合金表面制备涂层传感器,对其疲劳性影响甚微.
- 结构健康监测 /
- 表面技术 /
- 电位法 /
- 涂层传感器 /
- 飞机金属结构
Abstract: To allow continuous crack monitoring of aircraft metallic structures during their service, a fatigue crack monitoring method was presented based on modern surface technology and electrical potential technique. A crack monitoring coating sensor, consisting of the insulated separating layer, the conductive sensing layer and the packaging protective layer, was deposited on the hot spots of the structure. Fatigue crack monitoring experiments were carried out. Experimental results show that the information about crack can be acquired through analyzing the changes of the resistance (electrical potential) values of the surface coating sensor and the crack on different spots of aluminum alloy joint structures can be monitored availably at the same time. Moreover, the fatigue property of the specimen with surface coating sensor and that of the original specimen were studied. Contrast experiment results show that there is no obvious influence on the fatigue property of the 2A12-T4 aluminum alloy to prepare the coating sensor on its surface by modern surface technology.
- structure health monitoring /
- surface technology /
- electrical potential technique /
- coating sensor /
- aircraft metallic structures

HTML全文

参考文献(1)

[1] Chang J C I.Aging aircraft science and technology issues and challenge and USAF aging aircraft program[J].Structural Integrity of Aging Aircraft,1995,47:1-7 [2] Wolfgang Ecke,Stephan Grimm.Optical fiber grating Sensor network basing on high-reliable fibers and components for space-craft health monitoring .SPIE,2001,4328:160-167 [3] Schubert F.Basic principles of acoustic emission tomography[J].Journal of Acoustic Emission,2004,22:147-158 [4] Fukunaga H,Hu N,Chang F K.Structural damage identification using piezoelectric sensors[J].International Journal of Solids and Structures,2002,39(2):393-418 [5] Wheatley G,Clellan K L M.Remote periodic monitoring of fatigue crack prone areas by CVMTM—the H-53 experience[C]//6th Joint FAA/DoD/NASA Aircraft Conference on Aging Aircraft.Missouri:FAA,2002 [6] 杜金强,何宇廷,崔荣洪,等.基于电位法原理的金属结构裂纹监测传感器研究[J].南京航空航天学报,2010,42(3):387-391 Du Jinqiang,He Yuting,Cui Ronghong,et al.Research on surface crack monitoring sensor of metallic structure based on electric potential method[J].Journal of Nanjing University of Aeronautics and Astronautics,2010,42(3):387-391(in Chinese) [7] Todoroki A, Tanaka Y.Delamination identification of crossply graphite/epoxy composite beams using electric resistance change method[J].Compos Sci Technol,2002,62(6):29-39 [8] Schueler R,Joshi S P,Schulte K.Damage detection in CFRP by electrical conductivity mapping[J]. Compos Sci Technol,2001,61(9):21-30 [9] 顾迅.现代表面技术的应用[J].金属热处理,1999(4):1-6 Gu Xun.Application of modern surface technology[J].Heat Treatment of Metals,1999(4):1-6(in Chinese) [10] 张胜宝,师玉英,张旭.铝合金硬质阳极氧化工艺研究[J].电镀与精饰,2011,33(8):43-46 Zhang Shengbao,Shi Yuying,Zhang Xu.Hard anodizing technology of aluminum alloy[J].Plating and Finishing,2011, 33(8) :43-46(in Chinese) [11] 韩克,欧忠文,蒲滕,等.铝及铝合金硬质阳极氧化的研究进展[J].表面技术,2011,40(5):92-96 Han Ke,Ou Zhongwen,Pu teng,et al.Development of hard anodizing of aluminum and aluminum alloy[J].Surface Technology,2011,40(5):92-96(in Chinese) [12] 刘高杰,邓春枝.HCD空心阴极离子镀工艺研究[J].中国钼业,1997(4):46-48 Liu Gaojie,Deng Chunzhi.The technology research of hollow cathode deposition[J].China Molybdenum Industry,1997(4):46-48 (in Chinese) [13] 王基茹,蔡健平,丁鹤雁,等.国内外非铬航空涂层的研究进展[J].现代涂料与涂装,2005(2):39-41 Wang Jiru,Cai Jianping,Ding Heyan,et al.Research progress of non-chromate coatings for aircraft in the world[J].Modern Paint and Finishing,2005(2):39-41(in Chinese)

施引文献

期刊类型引用(4)

1.	周红华，黄辰，肖伟剑，陈向进，兰景权，许志刚，汪倍吉. 移动通信基站电磁辐射环境影响仿真预测与评价. 环境影响评价. 2020(03): 57-62 . 百度学术
2.	周红华，黄辰，肖伟剑，陈向进，兰景权，汪倍吉，许志刚. ±45°双极化通讯基站正向地面电磁辐射随角度变化的预测——通讯基站50m内电磁辐射环境超标范围3D准确仿真预测实验之二. 海峡科学. 2019(01): 8-13 . 百度学术
3.	吴雅琴，杨硕，师兰兰. 基于位置指纹与PDR融合的室内定位算法研究. 矿业科学学报. 2019(05): 448-454 . 百度学术
4.	周红华，黄辰，肖伟剑，兰景权，陈向进，许志刚，汪倍吉. 通讯基站50m内轴向发射电磁辐射预测——通讯基站50m内电磁辐射环境超标范围3D准确仿真预测实验之一. 海峡科学. 2018(11): 27-31 . 百度学术