端柱面组合密封气膜稳态特性数值仿真分析

马纲; 孙晓军; 罗先海; 何军

doi:10.13700/j.bh.1001-5965.2013.0322

端柱面组合密封气膜稳态特性数值仿真分析

doi: 10.13700/j.bh.1001-5965.2013.0322

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目:

国家自然科学基金资助项目（51075018）

详细信息

作者简介:
马纲（1967- ），女，安徽怀远人，副教授，mgbuaa@163.com.

中图分类号: V233.4⁺2
计量
- 文章访问数: 1200
- HTML全文浏览量: 118
- PDF下载量: 391
- 被引次数: 0
出版历程
- 收稿日期: 2013-06-05
- 网络出版日期: 2014-04-20

Numerical simulation analysis of steady-state properties of gas face and cylinder film seal

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 针对航空发动机等高速流体机械中流体动密封部位的工况特点，提出一种新型的端柱面组合气膜密封形式.根据气膜密封的结构特点，建立了端柱面螺旋槽组合式密封气膜的数学分析模型.采用CFD分析软件Fluent对气膜三维流场模型以湍流流动形式进行数值模拟计算.研究了密封气膜几何结构参数变化对密封稳态特性（端面承载力F_d 、柱面承载力F_c 、泄漏量Q、摩擦转矩M）的影响.几何结构参数包括端面平均膜厚、端面槽深比、柱面平均膜厚、柱面偏心率、柱面槽深比、柱面槽宽比.
- 气膜密封 /
- 组合密封 /
- 三维数值仿真 /
- 结构参数 /
- 稳态特性
Abstract: Aimed at the special condition of fluidic dynamic seals of high speed fluid machineries such as the aero-engine, a new type of sealing form, gas face and cylinder film seal was proposed. According to the structure characteristics of the gas film seal, the mathematical analysis model of the gas face and cylinder film seal was built. Then the model of gas film's three-dimensional flow field was numerically calculated by Fluent in the form of turbulent flow. The influence of sealing geometry structure parameters on the stability performances of the seal such as face opening force F_d, cylindrical opening force F_c, leakage Q, and friction torque M was studied. The geometry structure parameters include gas face film thickness, face groove depth ratio, cylindrical film thickness, cylindrical eccentricity, cylindrical groove depth ratio, and cylindrical groove width ratio.
- gas film seal /
- combined sealing /
- three dimensional numerical simulation /
- structural parameter /
- stability performance

HTML全文

参考文献(10)

[1]	马纲, 沈心敏.先进气膜密封技木研究进展与分祈[J].航空制造技术, 2009(3):58-61 Ma Gang, Shen Xinmin.Development and analysis of advanced gas film sealing technology[J].Aeronautical Manufacturing Technology, 2009(3):58-61(in Chinese)
[2]	Pang P, Zhu K Q, Wang X L.On the non-linear stability of self-acting gas journal bearings[J].Tribology International, 2009, 42(1):71-76
[3]	Lattime S B, Steinetz B M.Turbine engine clearance control systems:current practices and future directions[R].NASA/CP-2003-212458/VOL1, 2004
[4]	Netzel J P.High performance gas compressor seals[C]//International Conference on Fluid Sealing.New York:Elsevier, 1987:532-547
[5]	Munson J, Pecht G.Development of film riding face seals for a gas turbine engine[J].Tribology Transactions, 1992, 35(1): 65-70
[6]	沈心敏, 刘雨川, 马纲.航空燃气轮机摩擦学[M].北京:北京航空航天大学出版社, 2008 Shen Xinmin, Liu Yuchuan, Ma Gang.Tribology for aero-gas turbine engine[M].Beijing:Beihang University Press, 2008(in Chinese)
[7]	Hendricks R C.Straight cylindrical seal for high performance turbomachines[J].NASA Technical Paper, 1987
[8]	Ma G, Zhao W, Shen X M.Analysis of parameters and performance for spiral grooved cylindrical gas film seal[J].Procedia Engineering, 2011, 23:115-119
[9]	郝木明.机械密封技术及应用[M].北京:中国石化出版社, 2010:74-76 Hao Muming.Mechanical seal technology and its application[M].Beijing:China Petrochemical Press, 2010:74-76(in Chinese)
[10]	马纲, 赵伟, 沈心敏.螺旋槽气膜密封微间隙流场的三维数值模拟[J].润滑与密封, 2012, 37(3):7-11 Ma Gang, Zhao Wei, Shen Xinmin.Three dimensional numerical simulation of spiral groove gas film seal in micro-gap flow field[J].Lubricating Engineering, 2012, 37(3):7-11(in Chinese)