基于修正M-K模型的铝合金板材成形极限图预测

杨希英; 郎利辉; 刘康宁; 蔡高参; 郭禅

doi:10.13700/j.bh.1001-5965.2014.0310

基于修正M-K模型的铝合金板材成形极限图预测

doi: 10.13700/j.bh.1001-5965.2014.0310

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 国家自然科学基金资助项目(50975014); 中俄国际合作与交流NSFC-RFBR基金资助项目(51010166)

详细信息

作者简介:
杨希英(1985—),男,河北衡水人,博士生,yxiyingbuaa@163.com

通讯作者:
郎利辉(1970—),男,河南新乡人,教授,lang@buaa.edu.cn,主要研究方向为先进成形技术及装备.

中图分类号: V260.1;TG394
计量
- 文章访问数: 1468
- HTML全文浏览量: 130
- PDF下载量: 973
- 被引次数: 0
出版历程
- 收稿日期: 2014-05-29
- 修回日期: 2014-07-25
- 网络出版日期: 2015-04-20

Prediction of forming limit diagram of AA7075-O aluminum alloy sheet based on modified M-K model

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为准确预测AA7075-O铝合金板材的成形极限,将韧性断裂准则和传统M-K模型相结合,提出一种基于韧性断裂准则的修正M-K模型.利用单向拉伸模拟和试验相结合的方法,提取危险单元的应力应变历史并代入C-L韧性断裂准则中,得到材料常数.基于单向拉伸试验所得成形极限点,通过MATLAB编程得到修正M-K模型的初始厚度不均度.在常温下,以单向拉伸、宽板弯曲、液压胀形试验获得AA7075-O铝合金板材的成形极限曲线,与修正M-K模型和传统M-K模型计算得到的理论成形极限曲线进行对比,验证了修正M-K模型的可行性和准确性.
- 铝合金板 /
- M-K模型 /
- 韧性断裂准则 /
- 初始厚度不均度 /
- 成形极限图
Abstract: To accurately predict the forming limit diagram of AA7075-O aluminum alloy sheet, a modified M-K model was put forward based on the ductile fracture criterion and the traditional M-K model. By using the method which combined the uniaxial tension simulation with experiment, the history of stress-strain of the dangerous element was substituted into the C-L ductile fracture criterion which was implemented into Abaqus/Explicit to get the material constant. Based on the forming limit data obtained by the uniaxial tensile, the initial thickness imperfection in the modified M-K model was obtained by the method which was programed in MATLAB. At room temperature, the experimental forming limit data of AA7075-O aluminum alloy sheet were tested through the uniaxial tensile, wide plate bending and hydraulic bulging experiments. Meanwhile, the theoretical forming limit curves obtained by the modified M-K model and the traditional M-K model were computed respectively. By comparison, the modified M-K model is proved to be feasible and more accurate.
- aluminum alloy sheet /
- M-K model /
- ductile fracture criterion /
- initial thickness imperfection /
- forming limit diagram

HTML全文

参考文献(17)

[1]	Swift H W. Plastic instability under plane stress[J].Journal of the Mechanics and Physics of Solid,1952,1(1):1-18.
[2]	Hill R. On discontinuous plastic states with special reference to localized necking in thin sheets[J].Journal of Mechanics and Physics of Solids,1952,1(1):19-31.
[3]	Stören S, Rice J.Localized necking in thin sheets[J].Journal of the Mechanics and Physics of Solid,1975,23(6):421-441.
[4]	Zhu X H, Weinmann K,Chandra A.A unified bifurcation analysis of sheet metal forming limits[J].Journal of Engineering Materials and Technology,2001,123(3):329-333.
[5]	Marciniak Z, Kuczynski K.Limit strains in the processes of stretch-forming sheet metal[J].International Journal of Mechanical Science,1967,9(3):609-620.
[6]	杜平梅,郎利辉, 刘宝胜,等.基于M-K模型的成形极限预测及参数影响[J].塑性工程学报,2011,18(5):84-89. Du P M,Lang L H,Liu B S,et al.Theoretical prediction and parameter influence of FLDs based on M-K model[J].Journal of Plasticity Engineering,2011,18(5):84-89(in Chinese).
[7]	马高山,万敏, 吴向东.基于M-K模型的铝锂合金热态下成形极限预测[J].中国有色金属学报,2008,18(6):980-984. Ma G S,Wan M,Wu X D.Theoretical prediction of FLDs for Al-Li alloy at elevated temperature based on M-K model[J].The Chinese Journal of Nonferrous Metals,2008,18(6):980-984(in Chinese).
[8]	Assempour A, Nejadkhaki H K,Hashemi R.Forming limit diagrams with the existence of through-thickness normal stress[J].Computational Materials Science,2010,48(3):504-508.
[9]	陈劼实,周贤宾. 成形极限预测韧性断裂准则及屈服准则的影响[J].北京航空航天大学学报,2006,32(8):969-973. Chen J S,Zhou X B.Suitability of some ductile fracture criteria and yield criteria in forming limit prediction[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(8):969-973(in Chinese).
[10]	谢延敏,于沪平, 陈军,等.板料成形中韧性断裂准则应用研究进展[J].工程设计学报,2007,14(1):6-10. Xie Y M,Yu H P,Chen J,et al.Recent advances of research on application of ductile fracture criteria in sheet metal forming process[J].Journal of Engineering Design,2007,14(1):6-10(in Chinese).
[11]	Takuda H, Mori K.Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture[J].International Journal of Machine Tools and Manufacturing,2000,42(4):785-798.
[12]	Lei L P, Kim J.Bursting failure prediction in tube hydroforming process by using rigid-plastic FEM combined with ductile fracture criterion[J].International Journal of Mechanical Sciences,2002,44(7):1411-1428.
[13]	高付海,桂良进, 范子杰.基于韧性准则的金属板料冲压成形断裂模拟[J].工程力学,2010,27(2):204-208. Gao F H,Gui L J,Fan Z J.Numerical simulation of the fracture in sheet metal stamping based on ductile criterion[J].Engineering Mechanics,2010,27(2):204-208(in Chinese).
[14]	Vallellano C, Morales D,Garcia-Lomas F J.A study to predict failure in biaxially stretched sheets of aluminum alloy 2024-T3[J].Materials and Manufacturing Processes,2008,23(3):303-310.
[15]	Jain M,Allin J, Lloyd D J.Fracture limit prediction using ductile fracture criteria for forming of an automotive aluminum sheet[J].International Journal of Mechanical Sciences,1999,41(10) :273-288.
[16]	Hill R. A theory of the yielding and plastic flow of anisotropic metals[C]//Proceedings of the Royal Society of London Series A.London:The Royal Society,1948:281-297.
[17]	Takuda H, Mori K,Hatta N.The application of some criteria for ductile fracture to the prediction of the forming limit of sheet metals[J].Journal of Materials Processing Technology,1999,95(1-3):116-121.