Design and implementation of a compound load simulator
-
摘要: 基于一类具有零扭转特性的并联机构原理并结合所设计的载荷解耦装置,设计了一种可对扭矩、弯矩、轴向力3种载荷进行复合模拟的负载模拟器;控制系统以可编程多轴运动控制器(PMAC,Programmable Multi-Axis motion Controller)为核心,通过力传感器测得的负载反馈值,采用力、位置、电流三闭环的控制策略,在有效避免系统电磁干扰噪声对传感器信号影响的同时,能够稳定地、较为准确地以正弦波的方式完成对扭矩、弯矩、轴向力等载荷的复合模拟.通过对静态加载对象复合负载模拟的现场试验,验证了本系统机构设计的合理性和控制策略的可行性.
-
关键词:
- 负载模拟器 /
- 并联机构 /
- 载荷解耦 /
- 可编程多轴运动控制器
Abstract: With the devised load decoupling component, a compound load simulator used to compositely simulate loads like bending moment, axial force and torque was designed based on the principle of a kind of zero-torsion parallel mechanism. The core of its control system was a programmable multi-axis motion controller (PMAC). By load feedbacks from force or torque sensors, the system can realize the load simulation of torque, bending moment or axial force in the form of sine wave with the control method of triple close-loops including force, position and current. Meanwhile, it can effectively avoid the influences to the sensors-signal from system electromagnetic interference. Some field tests of compound load simulation were made to validate the correctness of the mechanical design and the control method. -
[1] 李伟.并/混联式复合负载模拟器设计原理及应用[D].北京:北京航空航天大学机械工程及自动化学院, 2012 Li Wei.Design principle and application of parallel/hybrid compound load simulator[D].Beijing:School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, 2012(in Chinese) [2] 李雄峰.机械式负载模拟系统的设计与研究[D].北京:北京航空航天大学机械工程及自动化学院, 2010 Li Xiongfeng.Design and research of a mechanical load simulator system[D].Beijing:School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, 2010(in Chinese) [3] 张冬辉.复合负载模拟器控制系统设计与实现[D].北京:北京航空航天大学机械工程及自动化学院, 2012 Zhang Donghui.Design and implementation of a composite load simulator control system[D].Beijing:School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, 2012(in Chinese) [4] Yu Jingjun, Li Wei, Pei Xu, et al.A compound load simulator based on zero-torsion parallel mechanisms[J].Front Mechanism Engineering, 2012, 7(1):1-4 [5] 徐杰, 宗光华, 于靖军, 等.用于复合加载的异形虎克铰设计与分析[J].机械设计与研究, 2012, 28(5):1-5 Xu Jie, Zong Guanghua, Yu Jingjun, et al.Design and analysis of profiled universal joint for compound loading[J].Machine Design and Research, 2012, 28(5):1-5(in Chinese) [6] 张冬辉, 毕树生, 于靖军, 等.一种新型电动复合力加载系统控制方法研究[J].航空动力学报, 2012, 28(1):54-59 Zhang Donghui, Bi Shesheng, Yu Jingjun, et al.A control method of novel electrical composite force loading system[J].Journal of Aerospace Power, 2012, 28(1):54-59(in Chinese) [7] 符文星, 孙力, 于云峰, 等.电动负载模拟器控制系统设计[J].西北工业大学学报, 2008, 26(5): 621-624 Fu Wenxing, Sun Li, Yu Yunfeng.Improving design of control system for DC motor-driven torque control simulator[J].Jomnal of Northwestern Polytechnical University, 2008, 26(5):621-624(in Chinese) [8] 袁朝辉, 孙焘.电动舵机负载模拟系统复合控制方法研究[J].计算机测量与控制, 2008, 16(10):1439-1440 Yuan Zhaohui, Sun Tao.Research on compound control method of rudder motor load simulation system[J].Computer Measurement & Control, 2008, 16(10):1439-1440(in Chinese)
点击查看大图
计量
- 文章访问数: 1420
- HTML全文浏览量: 296
- PDF下载量: 470
- 被引次数: 0