Citation: | Li Yubin, Zhang Zuoguang, Sun Zhijie, et al. Microstructure and affecting factors of epoxy resin cured by electron beam radiation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(08): 986-990. (in Chinese) |
[1] Crivello J V. Advanced curing technologies using photo-and electron beam induced cationic polymerization [J]. Radiation Physics and Chemistry, 2002, 63:21-27 [2] Zsigmond B, Halasz L, Czvikovszky T. Electron beam processing of carbon fibre reinforced braided composites [J]. Radiation Physics and Chemistry, 2003, 67(3/4):441-445 [3] 隋刚, 张佐光, 李敏, 等. 电子束固化环氧树脂的引发和增长反应速率 [J]. 北京航空航天大学学报, 2003, 29(8):682-685 Sui Gang, Zhang Zuoguang, Li Min, et al. Rate of initiation and propagation in electron beam curing of epoxy resins [J]. Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(8):682-685 (in Chinese) [4] Chappas W J, Devney B G, Olding R P, et al. EB curing of maritime composite structures [J]. Radiation Physics and Chemistry, 1999, 56(4):417-427 [5] Lopata V J. The manufacturing and repair of high performance composites using electron beam curing [J]. Materials Technology, 1999, 14(2):63-70 [6] Lioudmila G B, Catherine A B, Alexander N B, et al. Optimized electron beam curable aerospace adhesives International SAMPE Technical Conference. Covina, CA:Society for the Advancement of Material and Process Engineering, 2003:1981-1992 [7] Vastava R B. An assessment of e-beam technology for aircraft applications Proceedings of the 43rd International SAMPE Conference. Covina, CA:Society for the Advancement of Material and Process Engineering, 1998:1681-1690 [8] Parrot P. Electron beam curing at aerospatiale Proceedings of the 44th International SAMPE Symposium. Covina, CA:Society for the Advancement of Material and Process Engineering, 1999:1354-1358 [9] Saunders C, Lopata V, Barnard J, et al. Electron beam curing:taking good ideas to the manufacturing floor [J]. Radiation Physics and Chemistry, 2000, 57:441-445 [10] Berejka A J, Eberle C. Electron beam curing of composites in North America [J]. Radiation Physics and Chemistry, 2002, 63(3-6):551-556 [11] Boursereau F, Dupillier J M, Larnac G, et al. Advanced electron beam composites and modeling approach for spacecraft and transportation applications International SAMPE Symposium and Exhibition. Covina, CA:Society for the Advancement of Material and Process Engineering, 2000, 45:2235-2245 [12] Foedinger R, Schneider T, Grande R, et al. Development of electron beam curable composite motor cases International SAMPE Symposium and Exhibition. Covina, CA:Society for the Advancement of Material and Process Engineering, 2002, 47:570-584 [13] Lopata V J, Sidwell D R, Idgeon F E, et al. Preliminary test results for a type-trial repair on air Canada airbus aircraft fleet Proceedings of the 43rd International SAMPE Conference. Covina, CA:Society for the Advancement of Material and Process Engineering, 1998:1672-1680 [14] 隋刚,张佐光,袁宇慧,等. 增强纤维对环氧树脂基体电子束固化特征的影响研究 [J]. 复合材料学报, 2003, 20(2):1-6 Sui Gang, Zhang Zuoguang, Yuan Yuhui, et al. Study on effect of reinforce fiber on characteristic of electron beam curing in epoxy resin matrix [J]. Acta Materiae Compositae Sinica, 2003, 20(2):1-6 (in Chinese) [15] 刘玉文, 张志谦, 黄玉东, 等. 电子束固化复合材料界面 [J]. 复合材料学报, 2002, 19(3):16-20 Liu Yuwen, Zhang Zhiqian, Huang Yudong, et al. Interface of electron beam cured carbon fiber reinforced composites [J]. Acta Materiae Compositae Sinica, 2002, 19(3):16-20 (in Chinese)
|