Efficiency analysis and thermal-hydraulic modeling of aerial piston pump at whole work condition

[1] 李运华,王占林.机载智能泵源系统的开发研制[J].北京航空航天大学学报,2004,30(6):493-497 Li Yunhua,Wang Zhanlin.Development of airborne intelligent power supply system[J].Journal of Beijing University of Aeronautics and Astronautics,2004,30(6):493-497(in Chinese) [2] Neveu C D.Influence of viscosity on the rate of temperaure increase of hydraulic fluids //Proceedings of the 50th National Conference on Fluid Power.Las Veges:Country of Publication USA,2005:507-518 [3] 李永林.液压系统热力学模块化建模与仿真 .西安:空军工程大学工程学院,2008 Li Yonglin.Thermal-hydraulic modularized modeling and simulation of hydraulic system .Xi-an: Engineering College,Air Force Engineering University,2008(in Chinese) [4] Li Chenggong,Jiao Zongxia.Thermal-hydraulic modeling and simulation of piston pump[J].Chinese Journal of Aeronautics,2006,19(4):354-358 [5] 曹玉璋.传热学[M].北京:北京航空航天大学出版社,2001: 110-111 Cao Yuzhang.Heat transfer[M].Beijing:Beijing University of Aeronautics and Astronautics Press,2001: 110-111 (in Chinese) [6] Yunus A Cengel.传热学[M].2版.北京:高等教育出版社,2007:316-317 Yunus A Cengel.Heat transfer[M].2nd ed.Beijing:Higher Education Press,2007:316-317(in Chinese)