Citation: | Li Fuyuan, Zhang Yuwen, Teng Penghua, et al. Shape optimization of supercavitating torpedo[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(6): 815-818. doi: 10.13700/j.bh.1001-5965.2013.0444(in Chinese) |
[1] |
曹伟,魏英杰, 王聪,等.超空泡技术现状、问题与应用[J].力学进展,2006,36(4):571-579 Cao Wei,Wei Yingjie,Wang Cong,et al.Current status,problems and applications of supercavitation technology[J].Advances in Mechanics,2006,36(4):571-579(in Chinese)
|
[2] |
Saranjam B. Experimental and numerical investigation of an unsteady supercavitating moving body[J].Ocean Engineering,2013,59:9-14
|
[3] |
Vanek B, Bokor J,Balas G J,et al.Longitudinal motion control of a high-speed supercavitation vehicle [J].Journal of Vibration and Control,2007,13(2):159-184
|
[4] |
Alyanak E, Grandhi R,Penmetsa R.Optimum design of a supercavitating torpedo considering overall size,shape,and structural configuration[J].International Journal of Solids and Structures,2006,43(3/4):642-657
|
[5] |
傅慧萍,陈延伟, 游庆.超空泡航行体外形设计及航程分析[J].弹道学报,2007,19(3):15-18 Fu Huiping,Chen Yanwei,You Qing.Shape design and voyage analysis on supercavitating vehicles[J].Journal of Ballistics,2007,19(3):15-18(in Chinese)
|
[6] |
Logvinovich G V. Hydrodynamics of flows with free boundaries[J].Naukova Dumka,Kiev,1969:128
|
[7] |
Li F Y, Zhang Y W,Du X Z.Numerical simulation and analysis for influence of wall effect on cavity shape[J].Applied Mechanics and Materials,2013,385:400-403
|
[8] |
赵新华. 水下超高速航行体动力学建模与控制研究[D].哈尔滨:哈尔滨工程大学,2007 Zhao Xinhua.Research on dynamic modeling and control of underwater high-speed vehicle[D].Harbin:Harbin Engineering University,2007(in Chinese)
|
[9] |
张博,张宇文, 阚雷,等.超空泡航形体前部线形对空泡生成临界通气量影响的实验研究[J].应用力学学报,2008, 25(4): 562-565 Zhang Bo,Zhang Yuwen,Kan Lei,et al.Experimental investigation to effects of fore-body profile on critical gas rate for vehicle ventilated super cavitation[J].Chinese Journal of Applied Mechanics,2008,25(4):562-565(in Chinese)
|
[10] |
Ahn S S. An integrated approach to the design of supercavitating underwater vehicles[D].Georgia:Georgia Institute of Technology,2007
|