Advanced Search
Volume 41 Issue 6
Jun.  2015
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2015  >  41(6): 976-981.
TONG Zhaoxia, WANG Bo, ZUO Zhaokun, et al. Discrete element simulation of mechanical characteristics of sands under principal stress axes rotation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(6): 976-981. doi: 10.13700/j.bh.1001-5965.2014.0434(in Chinese)
Citation: TONG Zhaoxia, WANG Bo, ZUO Zhaokun, et al. Discrete element simulation of mechanical characteristics of sands under principal stress axes rotation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(6): 976-981. doi: 10.13700/j.bh.1001-5965.2014.0434(in Chinese)
shu

Discrete element simulation of mechanical characteristics of sands under principal stress axes rotation

doi: 10.13700/j.bh.1001-5965.2014.0434

  • School of Transportation Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • Received Date: 19 Jul 2014
  • Publish Date: 20 Jun 2015
    Abstract
  • The mechanical behavior of sands and other granular materials subjected to rotation of principal stress axes is significantly dependent on the micro fabric properties and their evolution. The discrete element simulation for sands under cyclic rotation of principal stress axes was validated by comparing the numerical simulation and laboratory test results on the development of two normal strains, the relationship between shear stress and shear strain, the evolution of the volumetric strain, and the effects of initial void ratio and stress ratio. Four variables characterized by the spatial distribution features of particle major axis orientation and inter-particle contact normal directions were used to describe the fabric properties of granular materials. The evolution of the four fabric variables in a single cycle was studied for granular materials subjected to cyclic rotation of principal stress axes. The effects of initial void ratio and stress ratio on the evolution of fabric variables were also investigated in detail.

     

    • FullText(HTML)
  • loading
    • References(15)
  • [1]
    Ishihara K, Towhata K.Sand response to cyclic rotation of principal stress directions as induced by wave loads[J].Soils and Foundations, 1983, 23(4):11-26.
    [2]
    Symes M J, Gens A, Hight D W.Undrained anisotropy and principal stress rotation in saturated sand[J].Geotechnique, 1984, 34(1):11-27.
    [3]
    Syme M J, Gens A, Hight D W.Drained principal stress rotation in saturated sand[J].Geotechnique, 1988, 38(1):59-81.
    [4]
    Miura K, Miura S, Toki S.Deformation behavior of anisotropic sand under principal stress axes rotation[J].Soils and Foundations, 1986, 26(1):36-52.
    [5]
    Gutierrez M, Ishihara K, Towhata I.Flow theory for sand during rotation of principal stress direction[J].Soils and Foundations, 1991, 31(4):121-132.
    [6]
    Nakata Y, Hyodo M, Murata H, et al.Flow deformation of sands subjected to principal stress rotation[J].Soils and Foundations, 1998, 38(2):115-128.
    [7]
    郭莹, 栾茂田, 何杨, 等.主应力方向循环变化对饱和松砂不排水动力特性的影响[J].岩土工程学报, 2005, 27(4):403-409. Guo Y, Luan M T, He Y, et al.Effect of variation of principal stress orientation during cyclic loading on undrained dynamic behavior of saturated loose sands[J].Chinese Journal of Geotechnical Engineering, 2005, 27(4):403-409(in Chinese).
    [8]
    Yang Z X, Li X S, Yang J.Undrained anisotropy and rotational shear in granular soil[J].Geotechnique, 2007, 57(4):371-384.
    [9]
    Zhang J M, Tong Z X, Yu Y L.Effects of cyclic rotation of principal stress axes and intermediate principal stress parameter on the deformation behavior of sands[C]//Geotechnical Earthquake Engineering and Soil Dynamics IV Congress 2008-Geotechnical Earthquake Engineering and Soil Dynamics.Reston:American Society of Civil Engineers, 2008:181.
    [10]
    童朝霞, 于艺林, 张建民, 等.中主应力系数对应力主轴循环旋转条件下砂土变形特性的影响[J].岩土工程学报, 2009, 31(6):946-952. Tong Z X, Yu Y L, Zhang J M, et al.Effects of intermediate principal stress parameter on deformation behavior of sands under cyclic rotation of principal stress axes[J].Chinese Journal of Geotechnical Engineering, 2009, 31(6):946-952(in Chinese).
    [11]
    Tong Z X, Zhang J M, Yu Y L, et al.Drained deformation behavior of anisotropic sands during cyclic rotation of principal stress axes[J].Journal of Geotechnical and Geoenvironmental Engineering, 2010, 136(11):1509-1518.
    [12]
    Li X, Yu H S.Numerical investigation of granular material behavior under rotational shear[J].Geotechnique, 2010, 60(5):381-394.
    [13]
    Fu P C, Dafalias Y F.Study of anisotropic shear strength of granular materials using DEM simulation[J].International Journal for Numerical and Analytical Methods in Geomechanics, 2011, 35(10):1098-1126.
    [14]
    Fu P C, Dafalias Y F.Fabric evolution within shear bands of granular materials and its relation to critical state theory[J].International Journal for Numerical and Analytical Methods in Geomechanics, 2011, 35(18):1918-1948.
    [15]
    Oda M, Iwashita K.Mechanics of granular materials:an introduction[M].Rotterdam:A A Balkma Publishers, 1999:1-100.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(1447) PDF downloads(92251) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return