Citation: | QIU Wenwang, LIU Qiang, YUAN Songmeiet al. Computing approach of uncut chip thickness in orthogonal turn-milling with inserted cutters[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(9): 1638-1644. doi: 10.13700/j.bh.1001-5965.2014.0700(in Chinese) |
[1] |
Kopa J,Poga nik M.Theory and practice of achieving quality surface in turn milling[J].International Journal of Machine Tools and Manufacture,1997,37(5):709-715.
|
[2] |
Choudhury S,Bajpai J.Investigation in orthogonal turn-milling towards better surface finish[J].Journal of Materials Processing Technology,2005,170(3):487-493.
|
[3] |
王凡,喻红婕,姜增辉.正交车铣运动轨迹的研究[J].哈尔滨工业大学学报,2004,36(8):1038-1040.Wang F,Yu H J,Jiang Z H.Research on movement track of orthogonal turn-milling[J].Journal of Harbin Institute of Technology,2004,36(8):1038-1040(in Chinese).
|
[4] |
蔡永林,黄超,李建勇.基于切削接触状况的车铣复合加工刀具磨损分析[J].北京交通大学学报,2013,37(1):162-165.Cai Y L,Huang C,Li J Y.Analysis of cutter wear based on contact conditions in turn-milling[J].Journal of Beijing Jiaotong University,2013,37(1):162-165(in Chinese).
|
[5] |
金成哲,隋连香,徐骣.正交车铣复合加工的切削用量优化[J].沈阳理工大学学报,2010,29(5):60-63.Jin C Z,Sui L X,Xu C.The optimization of cutting regime for orthogonal turn-milling[J].Journal of Shenyang Ligong University,2010,29(5):60-63(in Chinese).
|
[6] |
Martellotti M E.An analysis of the milling process[J].Transactions of the ASME,1941,63:677-700.
|
[7] |
Martellotti M E.An analysis of the milling process.Part 2 down milling[J].Transactions of the ASME,1945,67:233-251.
|
[8] |
Wei Z C,Wang M J,Han X G.Cutting forces prediction in generalized pocket machining[J].International Journal of Advanced Manufacturing Technology,2010,50(5-8):449-458.
|
[9] |
Cao Q Y,Xue D Y,Zhao J,et al.A cutting force model considering influence of radius of curvature for sculptured surface machining[J].International Journal of Advanced Manufacturing Technology,2011,54(5-8):821-835.
|
[10] |
Zhu R,Kapoor S G,Devor R E.Mechanistic modeling of the ball end milling process for multi-axis machining of free-form surfaces[J].Journal of Manufacturing Science and Engineering,2001,123(3):369-379.
|
[11] |
Montgomery D,Altintas Y.Mechanism of cutting force and surface generation in dynamic milling[J].Journal of Engineering for Industry,1991,113(2):160-168.
|
[12] |
Sun Y W,Guo Q.Numerical simulation and prediction of cutting forces in five-axis milling processes with cutter runout[J].International Journal of Machine Tools and Manufacture,2011,51(10-11):806-815.
|
[13] |
姜增辉,贾春德.正交车铣切屑仿真的研究[J].兵工学报,2002,23(4):525-528.Jiang Z H,Jia C D.A study on the emulation of orthogonal turn-milling chips[J].Acta Armamentarii,2002,23(4):525-528(in Chinese).
|
[14] |
姜增辉,贾春德.无偏心正交车铣理论切削力[J].机械工程学报,2006,42(9):23-28.Jiang Z H,Jia C D.Theoretical cutting force of non-eccentricity orthogonal turn-milling[J].Chinese Journal of Mechanical Engineering,2006,42(9):23-28(in Chinese).
|
[15] |
朱立达,李虎,杨建宇,等.正交车铣三维切屑理论建模研究[J].东北大学学报:自然科学版,2012,33(1):111-115.Zhu L D,Li H,Yang J Y,et al.Research on theoretical modeling of 3D chip of orthogonal turn-milling[J].Journal of Northeastern University:Natural Science,2012,33(1):111-115(in Chinese).
|
[16] |
闫蓉,邱锋,彭芳瑜,等.螺旋立铣刀正交车铣轴类零件切削力建模分析[J].华中科技大学学报:自然科学版,2014,42(5):1-5.Yan R,Qiu F,Peng F Y,et al.Modeling and analysis of cutting forces in orthogonal turn-milling shaft parts with helical end mills[J].Journal of Huazhong University of Science and Technology:Natural Science Edition,2014,42(5):1-5(in Chinese).
|
[17] |
Uysal E,Karaguzel U,Budak E,et al.Investigating eccentricity effects in turn-milling operations[C]//6th CIRP International Conference on High Performance Cutting.Amsterdam:Elsevier,2014,14:176-181.
|