Citation: | XU Rongzhang, GUAN Zhidong, JIANG Siyuanet al. Influence of side boundary condition on compression performance of aluminum alloys stiffened panels[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(1): 187-192. doi: 10.13700/j.bh.1001-5965.2015.0022(in Chinese) |
[1] |
杜善义,关志东.我国大型客机先进复合材料技术应对策略思考[J].复合材料学报,2008,25(1):1-10. DU S Y,GUAN Z D.Strategic considerations for development of advanced composite technology for large commercial aircraft in China[J].Acta Materiae Compositae Sinica,2008,25(1):1-10(in Chinese).
|
[2] |
DURSUN T,SOUTIS C.Recent developments in advanced aircraft aluminum alloys[J].Materials & Design,2014,56(4):862-871.
|
[3] |
HEINZ A,HASZLER A,KEIDEL C,et al.Recent development in aluminum alloys for aerospace applications[J].Materials Science and Engineering:A,2000,280(1):102-107.
|
[4] |
STARKE E A,STALEY J T.Application of modern aluminum alloys to aircraft[J].Progress in Aerospace Science,1996,32(2-3):131-172.
|
[5] |
崔德刚.结构稳定性设计手册[M].北京:航空工业出版社,1996:165-208. CUI D G.Design manual for structural stability[M].Beijing:Aviation Industry Press,1996:165-208(in Chinese).
|
[6] |
AALBERG A,LANGSETH M,LARSEN P K.Stiffened aluminum panels subjected to axial compression[J].Thin-Walled Structures,2001,39(10):861-885.
|
[7] |
PAULO R M F,TEIXEIRA-DIAS F,VALENTE R A F.Numerical simulation of aluminum stiffened panels subjected to axial compression:Sensitivity analyses to initial geometrical imperfections and material properties[J].Thin-Walled Structures,2013,62(1):65-74.
|
[8] |
曾元松,黄遐.大型整体壁板成形技术[J].航空学报,2008,29(3):721-727. ZENG Y S,HUANG X.Forming technologies of large integral panel[J].Acta Aeronautica et Astronautica Sinica,2008,29(3):721-727(in Chinese).
|
[9] |
李劲风,郑子樵,李世晨,等.铝合金时效成形及时效成形铝合金[J].材料导报,2006,20(5):101-103. LI J F,ZHENG Z Q,LI S C,et al.Age forming of Al alloys and ageformable Al alloys[J].Materials Review,2006,20(5):101-103(in Chinese).
|
[10] |
邵青,何宇廷,张腾,等.侧边边界条件对复合材料加筋板轴压载荷下屈曲后屈曲性能的影响[J].复合材料学报,2014,31(3):741-748. SHAO Q,HE Y T,ZHANG T,et al.Influence of side boundary condition on buckling and post-buckling performance of composite stiffened panels under axial compression load[J].Acta Materiae Compositae Sinica,2014,31(3):741-748(in Chinese).
|
[11] |
CLARKE J D.Buckling of aluminum alloy stiffened plate ship structure[M]//NARAYANAN R.Aluminum atructures-advances design and construction.Amsterdam:Elsevier,1987:81-92.
|
[12] |
TRYLAND T,HOPPERSTAD O S,LANGSETH M.Design of experiments to identify material properties[J].Materials & Design,2000,21(5):477-492.
|
[13] |
朱浩,朱亮,陈剑虹.应力三轴度和应变率对6063铝合金力学性能的影响及材料表征[J].材料科学与工程学报,2007,25(3):358-362. ZHU H,ZHU L,CHEN J H.Influence of stress triaxiality and strain rate on the mechanics behavior of 6063 aluminum alloy and material characterization[J].Journal of Materials Science & Engineering,2007,25(3):358-362(in Chinese).
|
[14] |
戴福隆,沈观林,谢惠民.实验力学[M].北京:清华大学出版社,2010:367-385. DAI F L,SHEN G L,XIE H M.Experimental mechanics[M].Beijing:Tsinghua University Press,2010:367-385(in Chinese).
|
[15] |
ZHANG D N,SHANGGUAN Q Q,XIE C J,et al.A modified Johnson-Cook model of dynamic tensile behaviors for 7075-T6 aluminum alloy[J].Journal of Alloys and Compounds,2015,619:186-194.
|
[16] |
HOOPUTRA H,GESE H,DELL H,et al.A comprehensive failure model for crashworthiness simulation of aluminum extrusions[J].International Journal of Crashworthiness,2004,9(5):449-463.
|