Advanced Search
Volume 42 Issue 5
May  2016
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2016  >  42(5): 1016-1024.
BIAN Tianya, GUAN Zhidong, LIU Faqi, et al. Prediction on in-plane compression elastic properties of satin weave composites with pore matrix[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(5): 1016-1024. doi: 10.13700/j.bh.1001-5965.2015.0312(in Chinese)
Citation: BIAN Tianya, GUAN Zhidong, LIU Faqi, et al. Prediction on in-plane compression elastic properties of satin weave composites with pore matrix[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(5): 1016-1024. doi: 10.13700/j.bh.1001-5965.2015.0312(in Chinese)
shu

Prediction on in-plane compression elastic properties of satin weave composites with pore matrix

doi: 10.13700/j.bh.1001-5965.2015.0312
  • 1.

    School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

  • 2. Science and Technology on Complex Aviation Systems Simulation, Beijing 100076, China

  • Received Date: 18 May 2015
  • Publish Date: 20 May 2016
    Abstract
  • Because of the complex meso-structure of satin weave composites, it is difficult to apply traditional methods to prediction on elastic properties. For this problem, the representative volume element (RVE) of satin weave composite was established and research on prediction on effective in-plane compression modulus and in-plane Poisson's ratio of the RVE was made. Longitude compression modulus of bending fiber yarns and properties of pore matrix were calculated based on energy method and inclusion theory, respectively. Traditional rules of mixtures formulations were improved so as to get an accurate analytical prediction on in-plane compression modulus and in-plane Poisson's ratio of the RVE. The model of the RVE was established based on Python language being used in the finite element method software ABAQUS. Prediction on effective in-plane compression modulus and in-plane Poisson's ratio was made based on finite element method results of the model under the basic forced state. The error between analytical method and numerical simulation is small, which gives an excellent prediction on in-plane compression modulus and in-plane Poisson's ratio of carbon/carbon satin weave composites.

     

    • FullText(HTML)
  • loading
    • References(26)
  • [1]
    魏高峰,孙晓强,刘国永,等.三维编织复合材料几何建模及数值分析[J].固体力学学报,2011,32(增刊):65-69 WEI G F,SUN X Q,LIU G Y,et al.Geometric model for three-dimensional braided composites and its numerical analysis[J].Chinese Journal of Solid Mechanics,2011,32(Suppl.):65-69(in Chinese)
    [2]
    董伟锋,肖军,李勇,等.2.5维编织复合材料弹性性能的理论研究[J].南京航空航天大学学报,2005,37(5):659-663 DONG W F,XIAO J,LI Y,et al.Theoretical study on elastic properties of 2.5D braided composites[J].Journal of Nanjing University of Aeronautics and Astronautics,2005,37(5):659-663(in Chinese)
    [3]
    郑君,温卫东,崔海涛,等.2.5维机织结构复合材料的几何模型[J].复合材料学报,2008,25(2):143-148 ZHENG J,WEN W D,CUI H T,et al.Geometric model of 2.5 dimensional woven structures[J].Acta Materiae Compositae Sinica,2008,25(2):143-148(in Chinese)
    [4]
    曹海建,钱坤,盛东晓.2.5维机织复合材料的几何结构模型与验证[J].纺织学报,2009,30(5):58-62. CAO H J,QIAN K,SHENG D X.Geometry model and experimental verification of 2.5-D woven composites[J].Journal of Textile Research,2009,30(5):58-62(in Chinese).
    [5]
    杨振宇,俸翔,苏洲,等.2.5D编织复合材料细观结构及弹性性能[J].宇航材料工艺,2010(2):67-71. YANG Z Y,FENG X,SU Z,et al.Meso-structure and elastic properties of 2.5D braided composites[J].Aerospace Materials and Technology,2010(2):67-71(in Chinese).
    [6]
    卢子兴,冯志海,寇长河,等.编织复合材料拉伸力学性能的研究[J].复合材料学报,1999,16(3):129-134. LU Z X,FENG Z H,KOU C H,et al.Studies on tensile properties of braided structural composite materials[J].Acta Materiae Compositae Sinica,1999,16(3):129-134(in Chinese).
    [7]
    COX B N,DADKHAH M S,MORRIS W L.On the tensile failure of 3D woven composites[J].Composites Part A:Applied Science and Manufacturing,1996,27(4):47-58.
    [8]
    CALLUS P J,MOURITZ A P,BANNISTER M K,et al.Tensile properties and failure mechanisms of 3D woven GRP composites[J].Composites Part A:Applied Science and Manufacturing,1999,30(12):77-87.
    [9]
    BIGAUD D,HAMELIN P.Mechanical properties prediction of textile reinforced composite materials using a multiscale energetic approach[J].Composite Structures,1997,38(1-4):361-371.
    [10]
    MU J W,GUAN Z D,BIAN T Y,et al.The experiment and numerical simulation of composite countersunk-head fasteners pull-through mechanical behavior[J].Applied Composite Materials,2014,21(5):773-787.
    [11]
    GUAN Z D,MU J W,SU F,et al.Pull-through mechanical behavior of composite fastener threads[J].Applied Composite Materials,2015,22(3):251-267.
    [12]
    XIONG J J,SHENOI R A,CHENG X.A modified micromechanical curved beam analytical model to predict the tension modulus of 2D plain weave fabric composites[J].Composites Part B:Engineering,2009,40(8):776-783.
    [13]
    CHENG X,XIONG J J.A novel analytical model for predicting the compression modulus of 2D PWF composites[J].Composite Structures,2009,88(2):296-303.
    [14]
    卢子兴,徐强,王伯平,等.含缺陷平纹机织复合材料拉伸力学行为数值模拟[J].复合材料学报,2011,28(6):200-207. LU Z X,XU Q,WANG B P,et al.Numerical simulation of plain weave composites with defects under unidirectional tension[J].Acta Materiae Compositae Sinica,2011,28(6):200-207(in Chinese).
    [15]
    阚晋.碳/碳复合材料微细观结构的表征及对有效性能的影响研究[D].哈尔滨:哈尔滨工业大学,2010:20-26,41-42,57-58. KAN J.Investigation on characterization of micro and meso structures and their influence on effective properties of carbon/carbon composites[D].Harbin:Harbin Institute of Technology,2010:20-26,41-42,57-58(in Chinese).
    [16]
    袁辉.碳/碳复合材料刚度与强度预测模型研究[D].南京:南京航空航天大学,2009:52-53. YUAN H.Research on prediction models for stiffness and strength of C/C composites[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2009:52-53(in Chinese).
    [17]
    ZHANG D,HAYHURST D R.Prediction of stress-strain and fracture behavior of an 8-harness satin weave ceramic matrix composite[J].International Journal of Solids and Structures,2014,51(21-22):3762-3775.
    [18]
    BIAN T Y,GUAN Z D,MU J W,et al.An analytical model for predicting the tension modulus and Poisson's ratio of satin weave composites[C/OL]//Proceedings of 20th International Conference on Composite Materials(ICCM).[S.l.]:International Committee on Composite Materials,2015[2015-05-18].http://www.iccm-central.org/Proceedings/ICCM20proceedings/papers/paper-P105-4.pdf.
    [19]
    SODEN P D,HINTON M J,KADDOUR A S.Lamina properties,lay-up configurations and loading conditions for a range of fiber-reinforced composite laminates[J].Composites Science and Technology,1998,58(7):1011-1022.
    [20]
    ISHIKAWA T,CHOU T W.Elastic behavior of woven hybrid composites[J].Composite Materials,1982,16(1):2-19.
    [21]
    张平,桂良进,范子杰.三向编织复合材料弹性性能研究[J].工程力学,2009,26(1):31-36. ZHANG P,GUI L J,FAN Z J.Study on the elastic properties of triaxially braided composites[J].Engineering Mechanics,2009,26(1):31-36(in Chinese).
    [22]
    王波.三维编织复合材料力学行为研究[D].西安:西北工业大学,2002:65-67. WANG B.Study of the mechanical behavior of three dimensional braided composites[D].Xi'an:Northwestern Polytechnical University,2002:65-67(in Chinese).
    [23]
    周光明,王新峰,王鑫伟,等.三维机织复合材料的力学模型与实验验证[J].南京航空航天大学学报,2004,36(4):444-448. ZHOU G M,WANG X F,WANG X W,et al.Mechanical model and experimental verification of 3D woven composites[J].Journal of Nanjing University of Aeronautics and Astronautics,2004,36(4):444-448.
    [24]
    吴华利.三维正交机织复合材料结构与力学性能研究[D].武汉:武汉理工大学,2007:38. WU H L.Study on structure and mechanical performance of three-dimensional orthogonal woven composites[D].Wuhan:Wuhan University of Technology,2007:38(in Chinese).
    [25]
    沈观林,胡更开,刘彬.复合材料力学[M].2版.北京:清华大学出版社,2013:267-269. SHEN G L,HU G K,LIU B.Mechanics of composite materials[M].2nd ed.Beijing:Tsinghua University Press,2013:267-269(in Chinese).
    [26]
    NAIK N K,TIWARI S I,KUMAR R S.An analytical model for compressive strength of plain weave fabric composites[J].Composites Science and Technology,2003,63(5):609-625.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(679) PDF downloads(628) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return