Advanced Search
Volume 42 Issue 5
May  2016
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2016  >  42(5): 927-933.
CHEN Youdong, LI Jianyou, YOU Weiet al. Approach based on template for engineering drawing[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(5): 927-933. doi: 10.13700/j.bh.1001-5965.2015.0313(in Chinese)
Citation: CHEN Youdong, LI Jianyou, YOU Weiet al. Approach based on template for engineering drawing[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(5): 927-933. doi: 10.13700/j.bh.1001-5965.2015.0313(in Chinese)
shu

Approach based on template for engineering drawing

doi: 10.13700/j.bh.1001-5965.2015.0313
  • 1.

    School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

  • 2. Anhui EFORT Intelligent Equipment Co., Ltd., Wuhu 241007, China

  • Received Date: 18 May 2015
  • Publish Date: 20 May 2016
    Abstract
  • To solve low efficiency caused by a variety of engineering drawing styles, we proposed an approach based on template to generate the engineering drawing. The engineering drawing is abstracted into a complex form. Using the template technology for the form, the engineering drawing templates architecture is constructed. According to the characteristics of data, we design three strategies for input data. We take a string as the parameter name, and the string is the data interface between template and data. The templates are abstracted from the engineering drawing styles. The engineering drawings are generated by filling the template with data and adding a set of projection views. By using CATIA component application architecture(CAA), we have developed software system for the fast generation of engineering drawing. Through the verification by the software system, the effectiveness of the proposed method that improves the efficiency of the engineering drawing generation was confirmed.

     

    • FullText(HTML)
  • loading
    • References(16)
  • [1]
    刘晓平,田景成,黄永红,等.基于模板的工程CAD设计方法研究[J].计算机辅助设计与图形学学报,1999,11(4):296-299. LIU X P,TIAN J C,HUANG Y H,et al.The research of methodology based on template in engineering CAD[J].Journal of Computer Aided Design and Computer Graphics,1999,11(4):296-299(in Chinese).
    [2]
    刘晓平,石慧,毛峥强.模板研究发展与展望[J].合肥工业大学学报(自然科学版),2005,28(9):1089-1094. LIU X P,SHI H,MAO Z Q.Development and prospects of template technology[J].Journal of Hefei University of Technology(Natural Science),2005,28(9):1089-1094(in Chinese).
    [3]
    饶上荣.工程图纸自动生成技术的研究与实现[D].北京:中国科学院计算技术研究所,2000:70-81. RAO S R.Research and implementation of the automation for engineering drawing generation[D].Beijing:Institute of Computing Technology Chinese Academy of Sciences,2000:70-81(in Chinese).
    [4]
    饶上荣,白似雪,李士才.面向对象数据模型的表格模板规则设计[J].计算机辅助设计与图形学学报,2004,16(11):1590-1593. RAO S R,BAI S X,LI S C.Table template design with rule object-oriented model[J].Journal of Computer Aided Design and Computer Graphics,2004,16(11):1590-1593(in Chinese).
    [5]
    李末.基于SolidWorks的工程图智能生成研究与应用[D].大连:大连理工大学,2012:16-26. LI M.Research and application of intelligently generating the engineering drawings based on SolidWorks[D].Dalian:Dalian University of Technology,2012:16-26(in Chinese).
    [6]
    庞雨花,刘志更,吴淑芳,等.由三维参数化模型生成工程图的自动调整技术[J].工程图学学报,2008(3):156-160. PANG Y H,LIU Z G,WU S F,et al.Study on adjusting technology of drawing generation from 3D models[J].Journal of Engineering Graphics,2008(3):156-160(in Chinese).
    [7]
    平凤伟.基于模板匹配的模具二维工程图自动生成技术的研究[D].武汉:华中科技大学,2009:12-20. PING F W.Study on template-matching based automatic 2-D engineering drawing generation technology for mould components[D].Wuhan:Huazhong University of Science and Technology,2009:12-20(in Chinese).
    [8]
    邵晓明.CATIA工程图国标化与辅助精度设计技术研究[D].南京:南京航空航天大学,2010:18-35. SHAO X M.Research on standardization of CATIA drafting and computer aided tolerance[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010:18-35(in Chinese).
    [9]
    谢大帅.基于三维设计的企业应用平台技术研究[D].成都:西安交通大学,2011:57-70. XIE D S.Research on technology of 3D design plateform for enterprise application[D].Chengdu:Southwest Jiaotong University,2011:57-70(in Chinese).
    [10]
    佘晶.工程图纸智能化生成技术的研究与实现[D].南京:南京航空航天大学,2005:48-56. SHE J.Research and application on drawing paper intelligent creation[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2005:48-56(in Chinese).
    [11]
    饶上荣,金文华,唐卫清,等.面向对象设计的嵌套表格模板设计技术[J].计算机辅助设计与图形学学报,2000,12(9):705-710. RAO S R,JIN W H,TANG W Q,et al.Nested table layout based on object-oriented template[J].Journal of Computer Aided Design and Computer Graphics,2000,12(9):705-710(in Chinese).
    [12]
    王宗彦,王乔,吴淑芳,等.基于零装配的动态全息模型[J].计算机集成制造系统,2013,19(5):1000-1008. WANG Z Y,WANG Q,WU S F,et al.Dynamic holographic model based on zero D[J].Computer Integrated Manufacturing Systems,2013,19(5):1000-1008(in Chinese).
    [13]
    吕学庚.基于Inventor的自带冠静叶隔板参数化设计关键技术研究[D].哈尔滨:哈尔滨工业大学,2014:42-53. LV X G.Study on key technologies of integral-shroud blade diaphragm's parametric design based on inventor[D].Harbin:Harbin Institute of Technology,2014:42-53(in Chinese).
    [14]
    梅中义,曾令卫,吴斌.基于三维特征设计的二维工程图的自动生成[J].北京航空航天大学学报,2000,26(1):107-110. MEI Z Y,ZENG L W,WU B.Automatic generating 2D drawing based on 3D feature design model[J].Journal of Beijing University of Aeronautics and Astronautics,2000,26(1):107-110(in Chinese).
    [15]
    宋小路.特殊类型立铣刀参数化设计技术研究[D].成都:西南交通大学,2010:63-70. SONG X L.Research on parametric design technology of special types of the end mill[D].Chengdu:Southwest Jiaotong University,2010:63-70(in Chinese).
    [16]
    陈雪颂.基于三维模型的二、三维一体化技术研究[D].杭州:浙江大学,2004:24-32. CHEN X S.Techniques on 3D-model based 2D/3D bidirectional association[D].Hangzhou:Zhejiang University,2004:24-32(in Chinese).
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(1027) PDF downloads(716) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return