Advanced Search
Volume 42 Issue 6
Jun.  2016
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2016  >  42(6): 1142-1148.
LING Mu, YUAN Haiwen. Sensor placement method based on bond graph models[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(6): 1142-1148. doi: 10.13700/j.bh.1001-5965.2015.0400(in Chinese)
Citation: LING Mu, YUAN Haiwen. Sensor placement method based on bond graph models[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(6): 1142-1148. doi: 10.13700/j.bh.1001-5965.2015.0400(in Chinese)
shu

Sensor placement method based on bond graph models

doi: 10.13700/j.bh.1001-5965.2015.0400

  • School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

  • Received Date: 17 Jun 2015
  • Publish Date: 20 Jun 2016
    Abstract
  • In order to study the influence of sensor placement on fault diagnosis, a new sensor placement method based on bond graph model was proposed. A group of virtual sensor test points were set in bond graph model, then the information of bond graph structure and causality constraints were used to deduce a set of analytical redundancy relations, namely system residuals. The relationships among residuals,faults and sensor placement configuration were analysed,and this sensor placement method can meet the requirements of system fault detection and isolation performance. The sensor placement configuration with the minimum number of sensors was chosen under the premise of maximizing system diagnosis performance. Finally, the synchronous generator was used as an example to establish the sensor placement algorithm. Residual analysis was used to derive the structure fault feature matrix and the sensor feature matrix. The proposed sensor placement optimization algorithm was verified by this example, and the experimental results show that the final sensor placement configuration can meet the requirements of maximum parameter fault detection and isolation performance.

     

    • FullText(HTML)
  • loading
    • References(16)
  • [1]
    MAUL W A,KOPASAKIS G,SANTI L M,et al.Sensor selection and optimization for health assessment of aerospace systems[J].Journal of Aerospace Computing Information & Communication,2012,5(1):16-34.
    [2]
    KRYSANDER M,FRISK E.Sensor placement for fault diagnosis[J].IEEE Transactions on Systems and Humans,2008,38(6):1398-1410.
    [3]
    RAGHURAJ R,BHUSHAN M,RENGASWAMY R.Locating sensors in complex chemical plants based on fault diagnostic observability criteria[J].AIChE Journal,1999,45(2):310-322.
    [4]
    王中双,陆念力.键合图理论及应用研究若干问题的发展及现状[J].机械科学与技术,2008,27(1):72-77. WANG Z S,LU N L.A review of bond graph theory and its application[J].Mechanical Science and Technology for Aerospace Engineering,2008,27(1):72-77(in Chinese).
    [5]
    王艾伦,刘云.复杂机电系统动力学相似分析的键合图法[J].机械工程学报,2010,46(1):74-78.WANG A L,LIU Y.Bond graph method for the dynamic similarity analysis of complex electromechanical system[J].Journal of Mechanical Engineering,2010,46(1):74-78(in Chinese).
    [6]
    CHATTI N,GEHIN A,OULD B,et al.Functional and behavior models for the supervision of an intelligent and autonomous system[J].IEEE Transactions on Automation Science & Engineering,2013,10(2):431-445.
    [7]
    CHI G,WANG D,LE T,et al.Sensor placement for fault isolability using low complexity dynamic programming[J].IEEE Transactions on Automation Science & Engineering,2015,12(3):1-12.
    [8]
    BADOUD A E,KHEMLICHE M,BOUAMAMA B O,et al. Bond graph algorithms for fault detection and isolation in wind energy conversion[J].Arabian Journal for Science & Engineering,2014,39(5):4057-4076.
    [9]
    KHEMLICHE M,HAFFAF H.Sensor placement for component diagnosability using bond-graph[J].Sensors & Actuators A:Physical,2006,132(2):547-556.
    [10]
    SAMANTARAY A K,GHOSHAL S K. Sensitivity bond graph approach to multiple fault isolation through parameter estimation[J].Journal of Systems & Control Engineering,2007,221(4):577-587.
    [11]
    STAROWIECKI M,COMTET G.Analytical redundancy relations for fault detection and isolation in algebraic dynamic systems[J].Automatica,2001,37(5):687-699.
    [12]
    SAMANTARAY A K,MEDJAHER K,BOUAMAMA B O,et al.Diagnostic bond graphs for online fault detection and isolation[J].Simulation Modelling Practice & Theory,2006,14(3):237-262.
    [13]
    SAHM D.A two-axis,bond graph model of the dynamics of synchronous electrical machines[J].Journal of the Franklin Institute,1979,308(79):205-218.
    [14]
    NUNEZ H,ISRAEL N H,BREEDVELD P C,et al.Phasor analysis of a synchronous generator:A bond graph approach[C]//International Journal of Electrical, Computer,Energetic,Electronic and Communication Engineering.Den Haag:World Academy of Science,Engineering and Technology,2014:938-944.
    [15]
    GONZALEZ G.Analysis of loading effect of systems in a bond graph approach with application to a synchronous machine[J].Journal of Systems & Control Engineering,2011,226(2):243-255.
    [16]
    JUNCO S, DIÉGUEZ G, RAMÍREZ F. On commutation modeling in bond graphs[C]//Proceeding of the International Conference on Bond Graph Modeling and Simulation. Vista, CA: The Society for Modeling and Simulation International, 2007: 115-119.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(1067) PDF downloads(1156) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return