Advanced Search
Volume 42 Issue 7
Jul.  2016
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2016  >  42(7): 1344-1351.
FAN Xiaoliang, WU Xuehua, WANG Jinfeng, et al. Numerical simulation and experiment in high-speed cutting superalloy GH4169[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(7): 1344-1351. doi: 10.13700/j.bh.1001-5965.2015.0436(in Chinese)
Citation: FAN Xiaoliang, WU Xuehua, WANG Jinfeng, et al. Numerical simulation and experiment in high-speed cutting superalloy GH4169[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(7): 1344-1351. doi: 10.13700/j.bh.1001-5965.2015.0436(in Chinese)
shu

Numerical simulation and experiment in high-speed cutting superalloy GH4169

doi: 10.13700/j.bh.1001-5965.2015.0436

  • School of Energy, Power and Mechanical Engineering, North China Electric Power University, Baoding 071003, China

  • Received Date: 30 Jun 2015
  • Publish Date: 20 Jul 2016
    Abstract
  • The finite element modeling technologies of the high-speed cutting superalloy GH4169 were investigated to simulate the cutting process correctly, which include establishing the finite element model, selecting the material constitutive model, and determining the chip separation criteria and contacting friction model, etc. To simulate the chip separation process and research the chip formation mechanism in high-speed cutting GH4169, the two-dimensional orthogonal cutting finite element models were constructed using Johnson-Cook model and isotropic hardening material constitutive model respectively. As a result, two models obtained the similar serrated chip. On this basis, equivalent plastic strain, cutting temperature and cutting force curve were simulated further. To verify the validity of the finite element model, an experiment was carried out by high-speed turning GH4169 on the machine of CA6140, and the serrated chip generated from the turning experiment verifies the validity of two finite element models. The results show that the serrated chip sawtooth degree increases with the increase of cutting speed and the adiabatic shear is the main reason to cause the serrated chip on high-speed cutting superalloy GH4169. The cutting force curve and cutting temperature generated from the experiment accord better with model A, which demonstrates that model A exceeds model B in reflecting the machining characteristics of high-speed cutting GH4169.

     

    • FullText(HTML)
  • loading
    • References(18)
  • [1]
    KOMANDURI R,BROWN R H.On the mechanics of chip segmentation in machining[J].Journal of Engineering for Industry,1981,103(1):33-51.
    [2]
    POULACHON G,MOISAN A L.Hard turning:Chip formation mechanisms and metallurgical aspects[J].Journal of Manufacturing Science and Engineering, 2000, 122(8):406-412.
    [3]
    吴申峰, 张雪萍.淬硬轴承钢锯齿形切屑形成机理[J].上海交通大学学报,2011,45(1):71-77.WU S F,ZHANG X P.Saw-tooth chip formation process and mechanism in hard turning AISI 52100 bearing steel [J].Journal of Shanghai Jiao Tong University,2011,45(1):71-77(in Chinese).
    [4]
    郝兆朋.切削 GH4169 的相关机理及高效切削技术的基础研究[D].哈尔滨:哈尔滨工业大学,2013: 19-24.HAO Z P.Research on related mechanism and high efficiency cutting technology in machining nickel-based superalloy GH4169 [D].Harbin:Harbin Institute of Technology,2013:19-24(in Chinese).
    [5]
    WANG C Y,XIE Y Y,ZHENG L J,et al.Research on the chip formation mechanism during the high-speed milling of hardened steel [J].International Journal of Machine Tools and Manufacture,2014, 79:31-48.
    [6]
    谷丽瑶,王敏杰,孙传俊.高速切削过程绝热剪切局部化断裂的特性实验[J].机械工程学报,2015,50(15):166-171.GU L Y,WANG M J,SUN C J.Experimental study on characteristics of adiabatic shear localization fracture in high speed machining [J].Journal of Mechanical Engineering,2015,50(15):166-171 (in Chinese).
    [7]
    MABROUKI T,RIGAL J F.A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning [J].Journal of Materials Processing Technology,2006,176(1-3):214-221.
    [8]
    RHIM S H,OH S I.Prediction of serrated chip formation in metal cutting process with new flow stress model for AISI 1045 steel [J].Journal of Materials Processing Technology,2006,171(3):417-422.
    [9]
    ARRAZOLA P J,BARBERO O,URRESTI I.Influence of material parameters on serrated chip prediction in finite element modeling of chip formation process[J].International Journal of Material Forming,2010,3(Suppl.1):519-522.
    [10]
    杨奇彪,刘战强.Ti6Al4V切削锯齿形切屑绝热剪切带变形的表征[J].沈阳工业大学学报,2013,35(2):181-186.YANG Q B,LIU Z Q.Deformation characterization of adiabatic shear band for Ti6Al4V serrated chips [J].Journal of Shenyang University of Technology,2013,35(2):181-186(in Chinese).
    [11]
    肖茂华,何宁,李亮,等.镍基高温合金高速洗削的切削热研究[J].哈尔滨工程大学学报,2011,43(11):105-109.XIAO M H,HE N,LI L,et al.Cutting heat of Ni-base superalloy high speed milling[J].Journal of Harbin Engineering University,2011,43(11):105-109(in Chinese).
    [12]
    ZHU D Z,CHEN W P,LI Y Y.Strain-rate relationship of aluminum matrix composites predicted by Johnson-Cook model [C]//Proceedings of the 6th International Conference on Physical and Numerical Simulation of Materials Processing.Zurich-Dumten:Trans Tech Publications Ltd,2012:935-940.
    [13]
    DING H T,SHEN N G.Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult to machine alloys[J].Journal of Materials Processing Technology,2012,212(3):601-603.
    [14]
    段春争,王肇喜,李红华.高速切削锯齿形切屑形成过程的有限元模拟[J].哈尔滨工程大学学报,2014,35(2):226-232.DUAN C Z,WANG Z X,LI H H.Finite element simulation of the formation process of a serrated chip in high-speed cutting [J].Journal of Harbin Engineering University,2014,35(2):226-232 (in Chinese).
    [15]
    黄美霞.虚拟高速切削加工仿真技术研究[D].太原:中北大学,2010.HUANG M X.Virtual simulation technology for high speed cutting [D].Taiyuan:North University of China,2010(in Chinese).
    [16]
    魏彦杰.金属切削过程刀-屑接触区摩擦状态实验研究[D].秦皇岛:燕山大学．2008:7-9.WEI Y J.Experiental study of friction on the tool-chip contact field in metal cutting process[D].Qinghuangdao:Yanshan University,2008:7-9(in Chinese).
    [17]
    SCHULZ H,ABELE E.高速加工理论与应用[M].何宁,译.北京:科学出版社,2010:18-21.SCHULZ H,ABELE E.The high speed machining fundamentals and applications[M].HE N,translated.Beijing:Science Press,2010:18-21(in Chinese).
    [18]
    曹自洋,何宁,李亮,等.高速切削钛合金Ti6Al4V切屑的形成及其数值模拟[J].中国机械工程,2008,19(20):2450-2454.CAO Z Y,HE N,LI L,et al.High-speed cutting of titanium alloy Ti6Al4V chip formation and its numerical simulation[J].Chinese Mechanical Engineering,2008,19(20):2450-2454 (in Chinese).
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(906) PDF downloads(673) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return