Advanced Search
Volume 42 Issue 10
Oct.  2016
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2016  >  42(10): 2017-2023.
ZHOU Zhenggan, ZHOU Jianghua, ZHANG Kuanshuang, et al. Application of synthetic aperture focusing technique to defect quantification for immersion ultrasonic testing[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(10): 2017-2023. doi: 10.13700/j.bh.1001-5965.2015.0601(in Chinese)
Citation: ZHOU Zhenggan, ZHOU Jianghua, ZHANG Kuanshuang, et al. Application of synthetic aperture focusing technique to defect quantification for immersion ultrasonic testing[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(10): 2017-2023. doi: 10.13700/j.bh.1001-5965.2015.0601(in Chinese)
shu

Application of synthetic aperture focusing technique to defect quantification for immersion ultrasonic testing

doi: 10.13700/j.bh.1001-5965.2015.0601

  • School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

Funds:  Joint Fund of the National Natural Science Foundation of China and the China Academy of Engineering Physics (U1430120)
  • Received Date: 15 Sep 2015
  • Publish Date: 20 Oct 2016
    Abstract
  • Among the common defect quantification methods for immersion ultrasonic testing, some are high cost while others have relatively large quantitative error. Given the problem, a new 6 dB drop defect quantification method based on frequency domain synthetic aperture focusing technique (FSAFT-DQM) was studied. The FSAFT imaging method for spherically focused transducer used by immersion ultrasonic testing was established. Experiments conducted on specimens containing either circular cylindrical cavities or flat bottom hole show that defect depth has little effect on FSAFT-DQM's accuracy; compared with 6 dB drop method, flat bottom hole's quantitative error of FSAFT-DQM drops from 71.9% to within 10.0% with step length below half-wavelength of transducer's center frequency and the error decreases from 17.2% to 5.6% by image interpolation algorithm with step length between half-wavelength and wavelength. The research results show that FSAFT-DQM improves the precision of defect quantification effectively.

     

    • FullText(HTML)
  • loading
    • References(16)
  • [1]
    THOMPSON R B.Quantitative ultrasonic nondestructive evaluation methods[J].Journal of Applied Mechanics,1983,50(4b):1191-1201.
    [2]
    郑中兴.第四专题超声检测中缺陷的定量[J].无损检测,1994,16(2):52-57.ZHENG Z X.Quantitative evaluation of flaws in ultrasonic testing[J].Nondestructive Testing,1994,16(2):52-57(in Chinese).
    [3]
    史亦韦.超声检测[M].北京:机械工程出版社,2005:119-126.SHI Y W.Ultrasonic testing[M].Beijing:China Machine Press,2005:119-126(in Chinese).
    [4]
    SILK M G.Defect detection and sizing in metals using ultrasound[J].International Materials Reviews,1982,27(1):28-50.
    [5]
    胡宏伟,彭凌兴,周正干,等.曲面构件水浸超声检测缺陷定量研究[J].航空学报,2014,35(11):3166-3173.HU H W,PENG L X,ZHOU Z G,et al.Quantitative research on defect of curved components with immersion ultrasonic testing[J].Acta Aeronautica et Astronautica Sinica,2014,35(11):3166-3173(in Chinese).
    [6]
    王铮,梁菁,史丽军,等.复合材料层板超声检测缺陷评定方法分析[J].南京航空航天大学学报,2012,44(S):138-141.WANG Z,LIANG J,SHI L J,et al.Measurement for ultrasonic contact inspection on defect in carbon fiber-reinforced composite[J].Journal of Nanjing University of Aeronautics & Astronautics,2012,44(S):138-141(in Chinese).
    [7]
    SCHMERR L W.Fundamental of ultrasonic nondestructive evaluation[M].New York:Plenum Press,1998:181-197.
    [8]
    BUSSE L J,COLLINS H D,DOCTOR S R.Review and discussion of the development of synthetic aperture focusing technique for ultrasonic testing (SAFT-UT):NUREG/CR-3625[R].Richland:Pacific Northwest Lab,1984.
    [9]
    FREDERICK J R,SEYDEL J A,FAIRCHILD R C.Improved ultrasonic non-destructive testing of pressure vessels:NUREG-O007-1[R].Ann Arbor:University of Michigan,1976.
    [10]
    BUSSE L J.Three-dimensional imaging using a frequency-domain synthetic aperture focusing technique[J].IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,1992,39(2):174-179.
    [11]
    STEPINSKI T.An implementation of synthetic aperture focusing technique in frequency domain[J].IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,2007,54(7):1399-1408.
    [12]
    吴施伟,吴海腾,金浩然,等.聚焦探头水浸检测下的频域合成孔径聚焦技术[J].浙江大学学报(工学版),2015,49(1):110-115.WU S W,WU H T,JIN H R,et al.Frequency-domain synthetic aperture focusing technique for immersion testing using focused transducer[J].Journal of Zhejiang University (Engineering Science),2015,49(1):110-115(in Chinese).
    [13]
    ROSE J L.Ultrasonic waves in solid media[M].Cambridge:Cambridge University Press,2004:24-26.
    [14]
    GOODMAN J W.Introduction to Fourier optics[M].New York:McGraw-Hill,1996:55-58.
    [15]
    LEVESQUE D,BLOUIN A,NERON C,et al.Performance of laser-ultrasonic F-SAFT imaging[J].Ultrasonics,2002,40(10):1057-1063.
    [16]
    SCHMERR L W,SONG S J.Ultrasonic nondestructive evaluation system:Models and measurements[M].New York:Springer Science & Business Media,2007:152-153.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(865) PDF downloads(732) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return