| Citation: | LI He, QUAN Qiquan, HUA Yuxiang, et al. An ultrasonic levitating bearing supporting radial and axial loads[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(4): 769-775. doi: 10.13700/j.bh.1001-5965.2016.0332(in Chinese)
|
An ultrasonic bearing that can support radial and axial loads simultaneously is proposed based on piezoelectric-driven principle and ultrasonic levitation technology. Supporting in two directions can be achieved only relying on single excitation source, which brings about compact structure and simple control. To predict the ultrasonic bearing's working frequency and acoustic impedance, acoustic impedance network of ultrasonic bearing is modeled. Finite element analysis (FEA) method is adopted to calculate the amplitude on radiating surface of the ultrasonic bearing. In order to verify the ultrasonic bearing's performance, a prototype is developed and levitating capability experiments are conducted. Results in the experiments demonstrate that the ultrasonic bearing shows good suspending performance and is able to support larger radial loads and certain axial loads simultaneously. The design of this kind of ultrasonic bearing will open up a new way to develop novel bearing structure in the future.
| [1] |
IDE T, FRIEND J, NAKAMURA K, et al. A non-contact linear bearing and actuator via ultrasonic levitation[J].Sensors & Actuators A Physical, 2007, 135(2):740-747. http://www.sciencedirect.com/science/article/pii/S092442470600536X
|
| [2] |
常颖, 吴博达, 杨志刚, 等.超声波悬浮推力轴承承载能力及减摩性能[J].吉林大学学报, 2004, 34(2):222-225. http://www.cnki.com.cn/Article/CJFDTOTAL-JLGY200402012.htm
CHANG Y, WU B D, YANG Z G, et al. Bearing capacity and anti-friction behavior of ultrasonic vibration bearing[J].Journal of Jilin University, 2004, 34(2):222-225(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JLGY200402012.htm
|
| [3] |
田丰君, 车小红, 杨志刚, 等.双向支撑超声波悬浮轴承的设计[J].光学精密工程, 2009, 17(4):813-818. http://cdmd.cnki.com.cn/Article/CDMD-10183-2008060979.htm
TIAN F J, CHE X H, YANG Z G, et al. Structure design of bidirectional support ultrasonic levitation bearing[J].Optics and Precision Engineering, 2009, 17(4):813-818(in Chinese). http://cdmd.cnki.com.cn/Article/CDMD-10183-2008060979.htm
|
| [4] |
刘家郡. 超声悬浮/气浮的混合悬浮及其行波驱动机理及实验研究[D]. 长春: 吉林大学, 2013: 81-86.
LIU J J. Research on principle and design of the driving based on near-filed acoustic levitation and pneumatic suspension[D].Changchun:Jilin University, 2013:81-86(in Chinese).
|
| [5] |
王冬. 超声悬浮轴承及微小电机机械特性测试技术研究[D]. 南京: 南京航空航天大学, 2010: 25-27.
WANG D.Research on ultrasonic suspension bearing and testing technology of micro-motor mechanical property[D].Nanjing:Nanjing University of Aeronautics and Astronautics, 2010:25-27(in Chinese).
|
| [6] |
CHEN C, WANG J S, JIA B, et al.Design of a noncontact spherical bearing based on near-field acoustic levitation[J].Journal of Intelligent Material Systems & Structures, 2013, 25(6):755-767. https://www.researchgate.net/publication/269598000_Design_of_a_noncontact_spherical_bearing_based_on_near-field_acoustic_levitation
|
| [7] |
ZHAO S, TWIEFEL J, WALLASCHEK J.Design and experimental investigations of high power piezoelectric transducers for a novel squeeze film journal bearing[J].Active & Passive Smart Structures & Integrated Systems, 2009, 7288(53):1-8. http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=821993
|
| [8] |
ZHAO S, MOJRZISCH S, WALLASCHEK J.An ultrasonic levitation journal bearing able to control spindle center position[J].Mechanical Systems & Signal Processing, 2013, 36(1):168-181. https://dr.ntu.edu.sg/handle/10220/17538?show=full
|
| [9] |
YOSHIMOTO S, ANNO Y, SATO Y, et al.Float characteristics of squeeze-film gas bearing with elastic hinges for linear motion guide[J].JSME International Journal, 1997, 40(2):353-359. doi: 10.1299/jsmec.40.353
|
| [10] |
YOSHIMOTO S, KOBAYASHI H, MIYATAKE M.Floating characteristics of a squeeze-film bearing for a linear motion guide using ultrasonic vibration[J].Tribology International, 2007, 40(3):503-511. doi: 10.1016/j.triboint.2006.05.002
|
| [11] |
HA D N, STOLARSKI T A, YOSHIMOTO S. An aerodynamic bearing with adjustable geometry and self-lifting capacity. Part 1:Self-lift capacity by squeeze film[J].Proceedings of the Institution of Mechanical Engineers Part J:Journal of Engineering Tribology, 2005, 219(1):33-39. doi: 10.1243/135065005X9682
|
| [12] |
STOLARSKI T A.Acoustic levitation-A novel alternative to traditional lubrication of contacting surfaces[J].Tribology Online, 2014, 9(4):164-174. doi: 10.2474/trol.9.164
|
| [13] |
WANG C, AU Y H J.Study of design parameters for squeeze film air journal bearing-excitation frequency and amplitude[J].Mechanical Sciences, 2011, 2(2):147-155. doi: 10.5194/ms-2-147-2011
|
| [14] |
WANG C, AU Y H J.Levitation characteristics of a squeeze-film air journal bearing at its normal modes[J].The International Journal of Advanced Manufacturing Technology, 2012, 60(1):1-10. https://www.researchgate.net/publication/227096083_Levitation_characteristics_of_a_squeeze-film_air_journal_bearing_at_its_normal_modes
|
| [15] |
WANG C, AU Y H J.Comparative performance of squeeze film air journal bearings made of aluminum and copper[J].The International Journal of Advanced Manufacturing Technology, 2013, 65(1):57-66. doi: 10.1007/s00170-012-4150-z
|
Figures(12)
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad:
