| Citation: | SUN Xiaona, HE Xiaofan, LI Yuhaiet al. Determination method of equivalent initial flaw size for crack initiated at hole chamfering[J]. Journal of Beijing University of Aeronautics and Astronautics, 2018, 44(1): 187-195. doi: 10.13700/j.bh.1001-5965.2016.0985(in Chinese)
|
Cracks often initiate at the chamfering for sagging holes. The initial fatigue quality (IFQ) of this type of crack needs to be determined prior to economic life assessment. Firstly, finite element models with and without chamfering are developed so as to investigate the effect of chamfering on the stress intensity factors at the crack front. The results show that the chamfering imposes great influence on the stress intensity factors of relatively small crack. Secondly, in order to characterize the IFQ of sagging holes, a circular-front crack initiated at the intersection of the chamfering and specimen surface is taken as the initial flaw, with the radial distance of crack front from the initiation site as the crack size. Finally, the crack growth equation for relatively small cracks is employed to characterize the crack growth behavior, and the equivalent initial flaw size (EIFS) distribution is obtained through back-extrapolation. Statistical analyses show that the EIFS distribution parameters obtained by using the proposed crack size definition are independent of stress levels.
| [1] |
TONG Y C.Literature review on aircraft structural risk and reliability analysis:DSTO-TR-1110[R].Melboure:DSTO Aeronautical and Maritime Research Labratory, 2001.
|
| [2] |
RUDD J L, GRAY T D.Quantification of fastener-hole quality[J].Journal of Aircraft, 1978, 15(3):143-147. doi: 10.2514/3.58332
|
| [3] |
RUDD J L.Applications of the equivalent initial quality method:AFFDL-TM-76-83-FBE[R].Dayton:Wright-Patterson AFB, 1977.
|
| [4] |
MANNING S D, YANG J N, SHINOZUKA M.USAF durability design handbook:Guidelines for the analysis and design of durable aircraft structures:AFFDL-TR84-3027[R].Dayton:Wright-Patterson AFB, 1984.
|
| [5] |
YANG J N.Statistical estimation of economic life for aircraft structures[J].Journal of Aircraft, 1980, 17(7):528-535. doi: 10.2514/3.57935
|
| [6] |
BARTER S A, MOLENT L.Fatigue cracking from a corrosion pit in an aircraft bulkhead[J].Engineering Failure Analysis, 2014, 39(4):155-163. https://www.sciencedirect.com/science/article/pii/S1350630714000326
|
| [7] |
MOLENT L.A review of equivalent pre-crack sizes in aluminium alloy 7050-T7451[J].Fatigue & Fracture of Engineering Materials & Structures, 2014, 37(10):1055-1074. https://www.sciencedirect.com/science/article/pii/S001379441400280X
|
| [8] |
MOLENT L, SUN Q, GREEEN A J.Characterisation of equivalent initial flaw sizes in 7050 aluminium alloy[J].Fatigue & Fracture of Engineering Materials & Structures, 2006, 29(11):916-937. https://www.researchgate.net/publication/229546175_Characterisation_of_equivalent_initial_flaw_sizes_in_7050_aluminium_alloy
|
| [9] |
MATTRAND C, BOURINET J M, THÉRET D.Analysis of fatigue crack growth under random load sequences derived from military in-flight load data[C]//ICAF 2011 Structural Integrity:Inuence of Eciency and Green Imper-atives.Berlin:Springer-Verlag, 2011:399-413.
|
| [10] |
MATTRAND C, BOURINET J M.Random load sequences and stochastic crack growth based on measured load data[J].Engineering Fracture Mechanics, 2011, 78(17):3030-3048. doi: 10.1016/j.engfracmech.2011.08.022
|
| [11] |
XIANG Y, LIU Y. EIFS-based crack growth fatigue life prediction of pitting-corroded test specimens[J].Engineering Fracture Mechanics, 2010, 77(8):1314-1324. doi: 10.1016/j.engfracmech.2010.03.018
|
| [12] |
FAWAZ S A.Equivalent initial flaw size testing and analysis of transport aircraft skin splices[J].Fatigue & Fracture of Engineering Materials & Structures, 2003, 26(3):279-290. https://www.researchgate.net/publication/293333775_Equivalent_initial_flaw_size_testing_and_analysis_of_transport_aircraft_skin_splices
|
| [13] |
WANG D Y.An investigation of initial fatigue quality:STPZ8860S[R].West Conshohocken:ASTM Special Technical Publication, 1982.
|
| [14] |
航空航天部AFFD系统办公室. 美国空军耐久性手册背景材料: 第Ⅷ卷[M]西安: 航空航天部AFFD系统办公室, 1989.
AFFD System Engineering Office of the Department of Aeronautics and Astronautics. The background information of USAF durability design handbook:Vol.Ⅷ[M].Xi'an:AFFD System Engineering Office of the Department of Aeronautics and Astronautics, 1989(in Chinese).
|
| [15] |
YANG J, MANNING S, RUDD J, et al.Effect of specimen size and notch geometry on equivalent initial flaw size distribution[C]//AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit.Reston:AIAA, 1996:385-397.
|
| [16] |
曹淑森, 贺小帆, 杨博霄, 等.夹持边界条件下表面裂纹应力强度因子求解[J].北京航空航天大学学报, 2014, 40(11):1637-1642. http://bhxb.buaa.edu.cn/CN/abstract/abstract13088.shtml
CAO S S, HE X F, YANG B X, et al.Solution of stress intensity factor of surface cracked geometry with clamped ends[J].Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(11):1637-1642(in Chinese). http://bhxb.buaa.edu.cn/CN/abstract/abstract13088.shtml
|
| [17] |
张行.断裂力学[M].北京:中国宇航出版社, 1990:72-169.
ZHANG X.Fracture mechanics[M].Beijing:China Aerospace Press, 1990:72-169(in Chinese).
|
| [18] |
刘文珽.概率断裂力学与概率损伤容限/耐久性[M].北京:北京航空航天大学出版社, 1999:144-181.
LIU W T.Probabilistic fracture mechanics and probability damage tolerance/durability[M]. Beijing:Beihang University Press, 1999:144-181(in Chinese).
|
| [19] |
PROVAN J W.Probabilistic fracture mechanics and reliability[M]. Leiden:Martinus Nijhoff Publishers, 1987:70-72.
|
| [20] |
高镇同.疲劳应用统计学[M].北京:国防工业出版社, 1986:277-295.
GAO Z T. Fatigue application statistics[M]. Beijing:National Defence of Industry Press, 1986:277-295(in Chinese).
|
Figures(15) / Tables(2)
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad:
