Volume 46 Issue 2
Feb.  2020
Turn off MathJax
Article Contents
WANG Qianyuan, YUAN Hongjie, XU Ruyuanet al. Two-stage variable threshold correlative and competitive degradation modeling[J]. Journal of Beijing University of Aeronautics and Astronautics, 2020, 46(2): 398-406. doi: 10.13700/j.bh.1001-5965.2019.0215(in Chinese)
Citation: WANG Qianyuan, YUAN Hongjie, XU Ruyuanet al. Two-stage variable threshold correlative and competitive degradation modeling[J]. Journal of Beijing University of Aeronautics and Astronautics, 2020, 46(2): 398-406. doi: 10.13700/j.bh.1001-5965.2019.0215(in Chinese)

Two-stage variable threshold correlative and competitive degradation modeling

doi: 10.13700/j.bh.1001-5965.2019.0215
More Information
  • Corresponding author: YUAN Hongjie, E-mail: 05938@buaa.edu.cn
  • Received Date: 10 May 2019
  • Accepted Date: 05 Jul 2019
  • Publish Date: 20 Feb 2020
  • During the use of mechanical and electrical products, there are degradation failures and shock failures caused by the environment. It is often considered that self-degeneration and impact failure are independent of each other, or there is an incomplete phenomenon of the correlation, that is, the impact of the shock results in a sudden increase in self-degeneration. Considering that the impact will affect the degradation process, at the same time, the degradation will also affect the impact. When the amount of self-degradation reaches a certain value, it will not only affect the failure rate of impact failure, but also reduce the impact failure threshold of the product. As a result, the impact resistance of the product is reduced, and the impact failure process of the product shows a two-stage phenomenon. in the case of self-degeneration and shock failure, which is related and competitive, a reliability model for changing the failure rate and failure threshold has been established, which solves the problem of the incompleteness of the traditional competition model.

     

  • loading
  • [1]
    MIKI D, HONZUMI M, SUZUKI Y, et al.Large-amplitude MEMS electret generator with nonlinear spring[C]//International Conference on Micro Electro Mechanical Systems.Piscataway, NJ: IEEE Press, 2010: 176-179.
    [2]
    KUMAR D, JULIET A V.Design, electrostatic and eigen frequency analysis of fixed-fixed beam MEMS resonator[J].IOSR Journal of Electronics and Communication Engineering, 2013, 5(6):19-23. doi: 10.9790/2834-561923
    [3]
    SATO S, JOVANOVIC S, LANG J, et al.Demonstration of a palm-sized 30 W air-to-power turbine generator[J].Journal of Engineering for Gas Turbines and Power, 2011, 133(10):102301. doi: 10.1115/1.4002826
    [4]
    ZHAO X, XU J, LIU B, et al.Accelerated degradation tests planning with competing failure modes[J].IEEE Transactions on Reliability, 2018, 67(1):142-155. doi: 10.1109/TR.2017.2761025
    [5]
    HAGHIGHI F, BAE S J.Reliability estimation from linear degradation and failure time data with competing risks under a step-stress accelerated degradation test[J].IEEE Transactions on Reliability, 2015, 64(3):960-971. doi: 10.1109/TR.2015.2430451
    [6]
    CHEN Y, ZHANG Q, CAI Z, et al.Storage reliability assessment model based on competition failure of multi-components in missile[J].Journal of Systems Engineering and Electronics, 2017, 28(3):606-616. doi: 10.21629/JSEE.2017.03.20
    [7]
    YE Z, TANG L C, XU H, et al.A distribution-based systems reliability model under extreme shocks and natural degradation[J].IEEE Transactions on Reliability, 2011, 60(1):246-256. doi: 10.1109/TR.2010.2103710
    [8]
    WANG Q, HE Z, LIN S, et al.Failure modeling and maintenance decision for GIS equipment subject to degradation and shocks[J].IEEE Transactions on Power Delivery, 2017, 32(2):1079-1088. doi: 10.1109/TPWRD.2017.2655010
    [9]
    LIU X, TANG L.Accelerated life test plans for repairable systems with multiple independent risks[J].IEEE Transactions on Reliability, 2010, 59(1):115-127. doi: 10.1109/TR.2010.2040758
    [10]
    SONG S S, COIT D W, FENG Q, et al.Reliability analysis for multi-component systems subject to multiple dependent competing failure processes[J].IEEE Transactions on Reliability, 2014, 63(1):331-345. doi: 10.1109/TR.2014.2299693
    [11]
    JIANG L, FENG Q, COIT D W, et al.Reliability analysis for dependent failure processes and dependent failure threshold[C]//International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.Piscataway, NJ: IEEE Press, 2011: 30-34.
    [12]
    JIANG L, FENG Q, COIT D W, et al.Reliability and maintenance modeling for dependent competing failure processes with shifting failure thresholds[J].IEEE Transactions on Reliability, 2012, 61(4):932-948. doi: 10.1109/TR.2012.2221016
    [13]
    RAFIEE K, FENG Q, COIT D W, et al.Reliability modeling for dependent competing failure processes with changing degradation rate[J].IIE Transactions, 2014, 46(5):483-496. doi: 10.1080/0740817X.2013.812270
    [14]
    GUAN X M, ZHAO G Y, XUAN J.Reliability modeling for multi-component systems subject to multiple dependent competing failure processes with shifting hard failure threshold[C]//Prognostics and System Health Management Conference.Piscataway, NJ: IEEE Press, 2017: 1-7.
    [15]
    TANNER D M, DUGGER M T.Wear mechanisms in a reliability methodology[C]//Conference on Reliability, Testing, and Characterization of MEMS/MOEMS Ⅱ.Bellingham: SPIE, 2003: 22-40.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(10)  / Tables(1)

    Article Metrics

    Article views(504) PDF downloads(130) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return