| Citation: | HUANG Yuhui, SU Hua, CHENG Zhuoyi, et al. Judgment method of circumferential relative sliding of air film seal between shafts[J]. Journal of Beijing University of Aeronautics and Astronautics, 2021, 47(10): 2081-2087. doi: 10.13700/j.bh.1001-5965.2020.0366(in Chinese)
|
In order to predict whether there is relative sliding in the circumferential direction between the seal ring and the outer rotor in air film seal between shafts, a method for determining the circumferential sliding of air film seal between shafts considering centrifugal expansion effect is proposed. The mechanical mechanism of the circumferential sliding between seal ring and outer rotor is analyzed. The centrifugal expansion of seal ring and outer rotor is simplified into axisymmetric plane stress and axisymmetric plane strain. The influence of the difference of elastic deformation stiffness between seal ring and outer rotor on the expansion deformation and the connection relationship is calculated, and the critical sliding operating area between seal ring and rotor is obtained. The research method provides a prediction and guidance method for circumferential sliding of seal ring in engineering.
| [1] |
STEINETZ B M, HENDRICKS R C. Engine seal technology requirements to meet NASA's advanced subsonic technology program goals[J]. Journal of Propulsion and Power, 1996, 12(4): 786-793. doi: 10.2514/3.24102
|
| [2] |
STEINETZ B M, HENDRICKS R C, MUNSON J. Advanced seal technology role in meeting next generation turbine engine goals[C]//NASA Technical Memorandum Toulouse, 1998: 1-12.
|
| [3] |
胡绚, 罗贵火, 高德平. 航空发动机中介轴承的特性分析[J]. 航空动力学报, 2007, 22(3): 439-443. doi: 10.3969/j.issn.1000-8055.2007.03.019
HU X, LUO G H, GAO D P. Performance analysis of aero-engine intershaft bearing[J]. Journal of Aerospace Power, 2007, 22(3): 439-443(in Chinese). doi: 10.3969/j.issn.1000-8055.2007.03.019
|
| [4] |
HOLLOWAY G, MEHTA J, ROSADO L, et al. Rotating brush seal-experimental performance evaluation[C]//44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston: AIAA, 2008: 21-23.
|
| [5] |
HOLLOWAY G, MEHTA J, ROSADO L, et al. Rotating intershaft brush seal for sealing between rotating shafts: Part 1-Experimental performance evaluation compared to mechanical design analysis[C]//43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston: AIAA, 2007: 1-19.
|
| [6] |
MEHTA J, HOLLOWAY G, ROSADO L, et al. Innovative rotating intershaft brush seal for sealing between rotating shafts. Part Ⅱ: Modeling of the brush seal leakage flows[C]//42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston: AIAA, 2006: 1-14.
|
| [7] |
HOLLOWAY G, MEHTA J, ROSADO L, et al. Innovative rotating intershaft brush seal for sealing between rotating shafts. Part Ⅰ-Mechanical design of the rotating brush seal[C]//42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston: AIAA, 2006: 1-21.
|
| [8] |
王之栎, 刘国西, 郭艳丽. 反转轴间气膜密封振动过程分析[J]. 振动与冲击, 2011, 30(2): 181-185. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201102038.htm
WANG Z L, LIU G X, GUO Y L. Vibration process analysis of a gas film seal in counter-rotating shafts[J]. Journal of Vibration and Shock, 2011, 30(2): 181-185(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201102038.htm
|
| [9] |
王之栎, 侯景仁, 信琦. 反转轴间气密封研究[C]//第五届中日机械技术史及机械设计国际学术会议, 2005: 159-162.
WANG Z L, HOU J R, XIN Q. Research for an air film seal between two contraty rotation shafts[C]//Proceedings of the Fifth China-Japan International Conference on History of Mechanical Technology and Mechanical Design, 2005: 159-162(in Chinese).
|
| [10] |
DIRUSSO E. Feasibility analysis of a spiral groove ring seal for counter-rotating shafts[J]. Journal of Aircraft, 1984, 21(8): 618-622. doi: 10.2514/3.45032
|
| [11] |
GAMBLE W L. Counterrotating intershaft seals for advanced engines[J]. Journal of Propulsion and Power, 1985, 1(6): 437-440. doi: 10.2514/3.22825
|
| [12] |
刘雨川. 端面气膜密封特性研究[D]. 北京: 北京航空航天大学, 1999: 33-35. https://d.wanfangdata.com.cn/thesis/Y336381
LIU Y C. Behavior of gas film face seal[D]. Beijing: Beihang University, 1999: 33-35(in Chinese). https://d.wanfangdata.com.cn/thesis/Y336381
|
| [13] |
吴宁兴, 赵宗坚. 反转轴间气膜密封可行性试验研究[J]. 航空发动机, 2001, 27(4): 20-25. https://www.cnki.com.cn/Article/CJFDTOTAL-HKFJ200104004.htm
WU N X, ZHAO Z J. Feasibility test study of counter-rotating intershaft gas film seal[J]. Aeroengine, 2001, 27(4): 20-25(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HKFJ200104004.htm
|
| [14] |
王之栎, 刘国西, 郭艳丽. 反转轴间气膜密封动特性分析[J]. 北京航空航天大学学报, 2010, 36(5): 509-512. https://bhxb.buaa.edu.cn/CN/Y2010/V36/I5/509
WANG Z L, LIU G X, GUO Y L. Dynamic characteristic analysis of the gas film seal in counter-rotating shafts[J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(5): 509-512(in Chinese). https://bhxb.buaa.edu.cn/CN/Y2010/V36/I5/509
|
| [15] |
王之栎, 郭艳丽, 侯景仁. 反转轴间气膜密封的结构参数与密封性能分析[J]. 润滑与密封, 2008, 33(1): 68-72. https://www.cnki.com.cn/Article/CJFDTOTAL-RHMF200801017.htm
WANG Z L, GUO Y L, HOU J R. Configuration parameters and sealing performances analysis of gas film seal in counter-rotating shafts[J]. Lubrication Engineering, 2008, 33(1): 68-72(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-RHMF200801017.htm
|
| [16] |
刘晓玉, 王之栎, 丁蕾, 等. 反转轴间双端面气膜密封性能分析[J]. 北京航空航天大学学报, 2017, 43(3): 608-614. doi: 10.13700/j.bh.1001-5965.2016.0216
LIU X Y, WANG Z L, DING L, et al. Seal performance analysis of double-faced gas film in counter-rotating intershafts[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(3): 608-614(in Chinese). doi: 10.13700/j.bh.1001-5965.2016.0216
|
| [17] |
徐芝纶. 弹性力学(上册)[M]. 4版. 北京: 高等教育出版社, 2006.
XU Z L. Elastic mechanics. Volume I[M]. 4th ed. Beijing: Higher Education Press, 2006(in Chinese).
|
| [18] |
曹宏瑞, 李兵, 陈雪峰, 等. 高速主轴离心膨胀及对轴承动态特性的影响[J]. 机械工程学报, 2012, 48(19): 59-64. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201219009.htm
CAO H R, LI B, CHEN X F, et al. Centrifugal expansion of high-speed spindle and its influences on bearing dynamic characteristics[J]. Journal of Mechanical Engineering, 2012, 48(19): 59-64(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201219009.htm
|
| [19] |
张峻晖, 黄红武, 熊万里. 高速电主轴轴承配合过盈量的计算方法研究[J]. 机械与电子, 2004, 22(7): 7-10. https://www.cnki.com.cn/Article/CJFDTOTAL-JXYD200407002.htm
ZHANG J H, HUANG H W, XIONG W L. Calculation method research of the interference fit for high speed motorized spindle bearings[J]. Machinery & Electronics, 2004, 22(7): 7-10(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXYD200407002.htm
|
| [20] |
濮良贵, 陈国定, 吴立言. 机械设计[M]. 9版. 北京: 高等教育出版社, 2013: 132-133.
PU L G, CHEN G D, WU L Y. Mechanical design[M]. 9th ed. Beijing: Higher Education Press, 2013: 132-133(in Chinese).
|
Figures(7) / Tables(5)
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad:
