| Citation: | BIAN Renpeng, JIA Zhixin, BI Wenhai, et al. FMEA analysis of mechanical system of three-dimensional material warehouse unit[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(1): 156-165. doi: 10.13700/j.bh.1001-5965.2020.0527(in Chinese)
|
The three-dimensional material warehouse unit is an important sheet metal storage center in the sheet metal automatic intelligent production line. Its reliability is directly related to the reliability of the sheet metal automatic intelligent production line. Therefore, failure mode and effects analysis (FMEA) for the mechanical system of the three-dimensional material warehouse unit of the sheet metal automatic intelligent production line is very important. Aimed at the problem of lack of function and failure causality analysis in traditional FMEA, maintenance aware design environment (MADe) software is used to perform functional analysis and failure data analysis for the mechanical system of the three-dimensional material warehouse unit, and establish the function model diagram of the three-dimensional material warehouse unit and the failure causality diagram of the mechanical system. On this basis, the fuzzy cognitive map (FCM) adjacency matrix of the mechanical system is constructed according to the functional model diagram of the three-dimensional material warehouse unit, and then the FMEA table of the mechanical system of the three-dimensional material warehouse unit is obtained through calculation. The FMEA analysis of the mechanical system of the three-dimensional material warehouse unit based on MADe software shows that this method is universal for improving the reliability of the sheet metal automated intelligent production line.
| [1] |
周彭瑞, 鲁玉军. 基于FTA-FMEA和威布尔分布改进法的巧克力生产设备维护方法研究[J]. 轻工机械, 2019, 37(5): 94-101. doi: 10.3969/j.issn.1005-2895.2019.05.018
ZHOU P R, LU Y J. Chocolate manufacturing equipment maintenance method based on FTA-FMEA and improved Weibull distribution[J]. Light Industry Machinery, 2019, 37(5): 94-101(in Chinese). doi: 10.3969/j.issn.1005-2895.2019.05.018
|
| [2] |
鞠萍华, 陈资, 冉琰, 等. 多粒度概率语言环境下基于PROMETHEE的改进FMEA方法[J]. 北京航空航天大学学报, 2019, 45(11): 2266-2276. doi: 10.13700/j.bh.1001-5965.2019.0142
JU P H, CHEN Z, RAN Y, et al. Improved FMEA method based on PROMETHEE in multi-granular probabilistic linguistic environment[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(11): 2266-2276(in Chinese). doi: 10.13700/j.bh.1001-5965.2019.0142
|
| [3] |
李宇龙, 张根保, 王勇勤, 等. 数控机床基于元动作的FMEA分析技术研究[J]. 湖南大学学报(自然科学版), 2019, 46(10): 64-75. https://www.cnki.com.cn/Article/CJFDTOTAL-HNDX201910008.htm
LI Y L, ZHANG G B, WANG Y Q, et al. Research on FMEA analysis technology based on meta-action for numericalcontrol machine tool[J]. Journal of Hunan University(Natural Sciences), 2019, 46(10): 64-75(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HNDX201910008.htm
|
| [4] |
杜晗恒, 彭翀. 基于模糊TOPSIS的FMEA方法[J]. 北京航空航天大学学报, 2016, 42(2): 368-374. doi: 10.13700/j.bh.1001-5965.2015.0088
DU H H, PENG C. Failure mode and effects analysis method based on fuzzy TOPSIS[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(2): 368-374(in Chinese). doi: 10.13700/j.bh.1001-5965.2015.0088
|
| [5] |
HU T, YU J, WANG S Z. Research on complex system FMEA method based on functional modeling[C]// 8th International Conference on Reliability. Piscataway: IEEE Press, 2009: 63-66.
|
| [6] |
SUN L J, PENG L P, DENG G H, et al. A novel FMEA tool application in semiconductor manufacture[C]//China Semiconductor Technology International Conference (CSTIC). Piscataway: IEEE Press, 2017: 1-4.
|
| [7] |
MENON S, STECKI C, SONG J, et al. Optimization of PHM system for electronic assemblies using maintenance aware design environment software[C]//AIAC-14 Australian International Aerospace Congress, 2011: 1-14.
|
| [8] |
RUDOV-CLARK S, STECKI J, STECKI C. Application of advanced failure analysis results for reliability and availability estimations[C]//2011 Aerospace Conference. Piscataway: IEEE Press, 2011: 1-5.
|
| [9] |
HESS A, STECKI J S, RUDOV-CLARK S D. The maintenance aware design environment: Development of an aerospace PHM software tool[C]//2008 International Conference on Prognostics and Health Management(PHM). Piscataway: IEEE Press, 2008: 1-9.
|
| [10] |
冯辅周, 罗建华, 刘远宏, 等. 基于系统功能-结构-故障模型的FMEA分析方法[J]. 振动, 测试与诊断, 2016, 36(3): 413-418. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCS201603001.htm
FENG F Z, LUO J H, LIU Y H, et al. A FMEA analysis method based on function-structure-failure model[J]. Journal of Vibration, Measurement and Diagnosis, 2016, 36(3): 413-418(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCS201603001.htm
|
| [11] |
STECKI J, CROSS J, STECKI C, et al. Autonomous prognostics and health management (APHM)[C]//2012 European Conference of Prognostics and Health Management Society. Piscataway: IEEE Press, 2012: 1-8.
|
| [12] |
吕冰, 陈梦佳, 李泽群, 等. 基于功能流模型的青贮机械模块化设计[J]. 机械设计, 2018, 35(8): 116-120. https://www.cnki.com.cn/Article/CJFDTOTAL-JXSJ201808020.htm
LV B, CHEN M J, LI Z Q, et al. Modular design of silage machinery based on functional flow model[J]. Journal of Machine Design, 2018, 35(8): 116-120(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXSJ201808020.htm
|
| [13] |
肖聪, 李彦, 李文强, 等. 基于功能流的复杂产品模块划分方法研究[J]. 机械设计与制造, 2009(12): 249-251. doi: 10.3969/j.issn.1001-3997.2009.12.102
XIAO C, LI Y, LI W Q, et al. Module partition method for CoPS based on function chain[J]. Machinery Design and Manufacture, 2009(12): 249-251(in Chinese). doi: 10.3969/j.issn.1001-3997.2009.12.102
|
| [14] |
毕温海, 贾志新, 严伟, 等. 自动化立体物料仓库机械传动系统FMEA分析[J]. 重庆大学学报, 2019, 42(9): 45-55.
BI W H, JIA Z X, YAN W, et al. FMEA analysis of mechanical drive system of automatic three-dimensional material warehouse[J]. Journal of Chongqing University, 2019, 42(9): 45-55(in Chinese).
|
| [15] |
XU Z G, DANG Y Z, MUNRO P, et al. A data-driven approach for constructing the component-failure mode matrix for FMEA[J]. Journal of Intelligent Manufacturing, 2020, 31: 249-265. doi: 10.1007/s10845-019-01466-z
|
| [16] |
LIU L L, FAN D M, WANG Z L, et al. Enhanced GO methodology to support failure mode, effects and criticality analysis[J]. Journal of Intelligent Manufacturing, 2019, 30(6): 1-18.
|
| [17] |
杨佳宇, 段文杰, 李廷文, 等. 基于模糊认知图的水上交通事故涌现分析[J]. 交通信息与安全, 2019, 37(4): 19-26. https://www.cnki.com.cn/Article/CJFDTOTAL-JTJS201904003.htm
YANG J Y, DUAN W J, LI T W, et al. An analysis of emergence of water traffic accidents based on fuzzy cognitive map[J]. Journal of Transport Information and Safety, 2019, 37(4): 19-26(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JTJS201904003.htm
|
| [18] |
马楠, 杨炳儒, 鲍泓, 等. 模糊认知图研究进展[J]. 计算机科学, 2011, 38(10): 23-28. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJA201110006.htm
MA N, YANG B R, BAO H, et al. Research on progress of fuzzy cognitive map[J]. Computer Science, 2011, 38(10): 23-28(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JSJA201110006.htm
|
| [19] |
中国人民解放军总装备部. 故障模式、影响及危害性分析指南: GJB/Z 1391—2006[S]. 北京: 总装备部军标出版发行部, 2006.
General Armament Department of the Chinese People's Liberation Army. Guide to failure mode, effects and criticality analysis: GJB/Z 1391—2006[S]. Beijing: General Equipment Department Military Standard Publishing and Distribution Department, 2006(in Chinese).
|
| [20] |
王瑞, 李中凯. 基于功能流模型的产品功能模块划分方法[J]. 组合机床与自动化加工技术, 2012(7): 6-10. https://www.cnki.com.cn/Article/CJFDTOTAL-ZHJC201207003.htm
WANG R, LI Z K. Product functional module partition method based on function chain[J]. Modular Machine Tool and Automatic Manufacturing Technique, 2012(7): 6-10(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZHJC201207003.htm
|
Figures(9) / Tables(5)
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad:
