Citation: | FANG Yifang, XIANG Gaoxiang, TANG Chun'e, et al. Numerical simulation on internal flow performances of multi-stage pressure drop valve[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1915-1924. doi: 10.13700/j.bh.1001-5965.2021.0070(in Chinese) |
To study the internal flow process of the multi-stage pressure drop valve and the influencing factors and influence laws of the pressure drop of pressure-drop-stage, based on the numerical calculation method of the Mixture two-phase flow model and the Schnerr-Sauer cavitation model, the calculation model of the flow field of a multi-stage inside the valve was established. The flow characteristics inside the pressure drop valve are obtained through numerical simulation calculation, and the impact of various pressure differences and various opening degrees of the valve on the pressure drop of each pressure-drop-stage is analyzed and discussed. Numerical calculation results show that there are a large number of vortices in the valve due to the vigorous mixing and shear of multiple fluids when the fluid flows through the throttle element of the valve. The pressure drop of each pressure-drop-stage is different, and the degree of cavitation of the third stage sleeve is the largest, cavitation is more likely to occur at the valve seat. The pressure drop of the working fluid along each pressure-drop-stage exhibits the same changing trend at the same opening degree of the valve under various pressure differences. The pressure drop of the third pressure-drop-stage rises when the opening degree of the valve is reduced. The average pressure drop of the 3rd pressure-drop-stage reaches 8 MPa at the opening degree of 25%. The velocity of working fluid in the small hole of the pressure-drop-stage also increases under the condition of the same mass flow rate. This paper provides the theoretical basis and reference value for the designs of the pressure reducing valve.
[1] |
陆培文. 实用阀门设计手册[M]. 3版. 北京: 机械工业出版社, 2012: 1315-1416.
LU P W. Design manual of practical valve[M]. 3rd ed. Beijing: China Machine Press, 2012: 1315-1416(in Chinese).
|
[2] |
刘芳. 控制阀闪蒸和空化现象及阻塞流的计算[J]. 石油化工自动化, 2010, 46(2): 64-65. https://www.cnki.com.cn/Article/CJFDTOTAL-LYHG201002020.htm
LIU F. Control valve flash and cavitation phenomenon and the calculation of blocking flow[J]. Automation in Petro-Chemical, 2010, 46(2): 64-65(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-LYHG201002020.htm
|
[3] |
王燕, 胡建华, 胡建, 等. 多级套筒调节阀消声减振元件设计研究[J]. 流体机械, 2013, 41(7): 19-22. https://www.cnki.com.cn/Article/CJFDTOTAL-LTJX201307006.htm
WANG Y, HU J H, HU J, et al. Design and research of noise elimination and vibration reduction sleeve in control valve[J]. Fluid Machinery, 2013, 41(7): 19-22(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-LTJX201307006.htm
|
[4] |
FRANZONI F, MILANI M, MONTORSI L. Cavitating flows in hydraulic multidimensional CFD analysis[J]. Journal of Sexual Medicine, 2008, 1(1): 424-436.
|
[5] |
BERNAD S I, SUSAN-RESIGA R. Numerical model for cavitational flow in hydraulic poppet valves[J]. Modelling and Simulation in Engineering, 2012, 2012: 742162.
|
[6] |
ZARYANKIN A E, ZROICHIKOV N A, PARAMONOV A N, et al. Pressure pulsations in the turbine steam-admission path and their influence on the vibration state of the turbine control valves[J]. Thermal Engineering, 2012, 59(2): 106-112. doi: 10.1134/S0040601512020176
|
[7] |
SHIN C H. A numerical study on the characteristics of transient flow in a pressure regulator resulting from closure of the pressure control valve[J]. Journal of Mechanical ence and Technology, 2013, 27(2): 443-449. doi: 10.1007/s12206-012-1257-y
|
[8] |
项美根, 孙晓霞. 用多级降压法消除电厂调节阀气蚀[J]. 流体工程, 1992(11): 58-61. https://www.cnki.com.cn/Article/CJFDTOTAL-LTJX199211009.htm
XIANG M G, SUN X X. Eliminate cavitation in power plant regulating valve with multi-stage pressure reduction method[J]. Fluid Engineering, 1992(11): 58-61(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-LTJX199211009.htm
|
[9] |
蒋玲. 浅谈一种多级降压高压差结构在放空阀中的应用设计[J]. 仪器仪表用户, 2018, 25(8): 54-56. https://www.cnki.com.cn/Article/CJFDTOTAL-DZYQ201808024.htm
JIANG L. Application design of a multi stage buck high pre-ssure differential structure in vent valve[J]. Instrumentation Customers, 2018, 25(8): 54-56(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DZYQ201808024.htm
|
[10] |
顾成果. 套筒调节阀套筒结构的设计与分析[J]. 阀门, 2010(4): 8-10. https://www.cnki.com.cn/Article/CJFDTOTAL-FAME201004003.htm
GU C G. Design & analysis for sleeve structure of the cage control valve[J]. Valve, 2010(4): 8-10(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-FAME201004003.htm
|
[11] |
徐晓刚, 王天龙, 李树勋, 等. 高温高压降多级套筒调节阀噪声抑制研究[J]. 自动化与仪器仪表, 2016(1): 4-6. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDYY201601003.htm
XU X G, WANG T L, LI S X, et al. Research on noise suppression of multi-stage sleeve control valve with high temperature and high pressure drop[J]. Automation and Instrumentation, 2016(1): 4-6(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZDYY201601003.htm
|
[12] |
彭健, 何世权. 高压调节阀结构改进与汽蚀仿真[J]. 液压与气动, 2019(3): 120-125. https://www.cnki.com.cn/Article/CJFDTOTAL-YYYQ201903022.htm
PENG J, HE S Q. Structural improvement and cavitation simulation of high pressure regulating valve[J]. Chinese Hydraulics & Pneumatics, 2019(3): 120-125(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-YYYQ201903022.htm
|
[13] |
李树勋, 王天龙, 徐晓刚, 等. 高压降套筒式蒸汽疏水阀振动特性研究[J]. 振动与冲击, 2018, 37(4): 147-152. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201804022.htm
LI S X, WANG T L, XU X G, et al. A study on the vibration characteristics of high pressure drop sleeve trap[J]. Journal of Vibration and Shock, 2018, 37(4): 147-152(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201804022.htm
|
[14] |
李树勋, 康云星, 孟令旗, 等. 多级降压疏水调节阀流致噪声数值模拟研究[J]. 振动与冲击, 2020, 39(14): 116-121. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202014017.htm
LI S X, KANG Y X, MENG L Q, et al. Flow-induced noise of a high pressure drop control valve[J]. Journal of Vibration and Shock, 2020, 39(14): 116-121(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202014017.htm
|
[15] |
武世敏. 迷宫式调节阀流通能力的研究[D]. 银川: 宁夏大学, 2014: 20-37.
WU S M. The research of flow characteristic and pressure reducing mechanism of labyrinth steam conditioning control valve[D]. Yinchuan: Ningxia University, 2014: 20-37(in Chinese).
|
[16] |
SHUR M L, SPALART P R M K, STRELETS M K, et al. A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities[J]. International Journal of Heat and Fluid Flow, 2008, 29(6): 1638-1649.
|
[17] |
GRITSKEVICH M S, GARBARUK A V, SCHUTZE J, et al. Development of DDES and IDDES formulations for the k-ω shear stress transport model[J]. Flow, Turbulence and Combustion, 2012, 88(3): 431-449.
|
[18] |
MANNINEN M, TAIVASSALO V, KALLIO S. On the mixture model for multiphase flow[M]. Espoo: VTT Publications, 1996: 11-59.
|
[19] |
SCHILLER L, NAUMANN A. A drag coefficient correlation[J]. Zeitschrift des Vereins Deutscher Ingenieure, 1935, 77: 318-320.
|
[20] |
SHABIL S I. Physical and numerical modeling of unsteady cavitation dynamics[C]//4th International Conference on Multiphase Flow, 2001: 1-12.
|