Mechanical behaviors of brush seals and sealing performance

[1] Wood P E,Jones T V.A test facility for the measurement of torques at the shaft to seal interface in brush seals[J].Journal of Engineering for Gas Turbines and Power,1999,121(1):160-166 [2] Aksit M F,Tichy J A.Wear of brush seals: background and new modeling approach[J].Tribol.Trans.,1998,41(3):368-374 [3] Zhao H,Stango R J.Role of distributed interbristle friction force on brush seal hysteresis[J].ASME Journal of Tribology,2007,129:199-204 [4] Chew J W,Lapworth B L,Millener P J.Mathematical modeling of brush seals[J].Int. J. Heat Fluid Flow,1995,16(6): 493-500 [5] Yahya Dogu,Aksit M F.Effects of geometry on brush seal pressure and flow fields—part I: front plate configurations[J].Journal of Turbomachinery,2006,128:367-378 [6] Yahya Dogu,Aksit M F.Effects of geometry on brush seal pressure and flow flieds—part II:backing plate configurations[J].Journal of Turbomachinery,2006,128:379-389 [7] 王之栎,梁小峰,宋飞,等.低滞后刷式密封数值分析[J].北京航空航天大学学报,2008,34(9):1080-1083 Wang Zhili,Liang Xiaofeng,Song Fei,et al.Low hysteresis brush seal numerical situmulations[J].Journal of Beijing University of Aeronautics and Astronautics,2008,34(9):1080-1083(in Chinese) [8] 王之栎,梁小峰,黄其武.刷式密封二维模型数值计算[J].航空动力学报,2008,23(8):1461-1465 Wang Zhili,Liang Xiaofeng,Huang Qiwu.Two-dimensional model mathematical stimulation of brush seals[J].Journal of Aerospace Power,2008,23(8):1461-145(in Chinese)